Path: Home > GB/T > Page261 > GB/T 16844-2023 Home > Standard_List > GB/T > Page261 > GB/T 16844-2023

GB/T 16844-2023 English PDF

US$544.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16844-2023: Self-ballasted fluorescent lamps for general lighting service - Safety specifications
Status: Valid

GB/T 16844: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 16844-2023	English	544	Add to Cart	5 days [Need to translate]	Self-ballasted fluorescent lamps for general lighting service - Safety specifications	Valid	GB/T 16844-2023
GB 16844-2008	English	274	Add to Cart	3 days [Need to translate]	Self-ballasted lamps for general lighting services -- Safety requirements	Valid	GB 16844-2008
GB 16844-1997	English	519	Add to Cart	3 days [Need to translate]	Self-ballasted lamps for general lighting services--Safety requirements	Obsolete	GB 16844-1997

PDF similar to GB/T 16844-2023

Standard similar to GB/T 16844-2023

GB/T 15766.3 GB 19258 GB/T 19258.1 GB 16844 GB/T 16843 GB 16843

Basic data

Standard ID	GB/T 16844-2023 (GB/T16844-2023)
Description (Translated English)	Self-ballasted fluorescent lamps for general lighting service - Safety specifications
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	K71
Classification of International Standard	29.140.30
Word Count Estimation	30,334
Date of Issue	2023-12-28
Date of Implementation	2026-01-01
Older Standard (superseded by this standard)	GB 16844-2008
Issuing agency(ies)	State Administration for Market Regulation, China National Standardization Administration

GB/T 16844-2023: Self-ballasted fluorescent lamps for general lighting service - Safety specifications

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 29:140:30 CCSK71 National Standards of People's Republic of China Replace GB 16844-2008 Safety specifications for self-ballasted fluorescent lamps for general lighting Safetyspecifications Safetyrequirements,IDT) Published on 2023-12-28 Implemented on 2026-01-01 State Administration for Market Regulation Released by the National Standardization Administration Committee

Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 General requirements and general test requirements 3 5 signs 3 5:1 Lamp markings 3 5:2 Class marking 4 5:3 Eligibility of the mark 4 5:4 Logo 4 6 Interchangeability, mass and bending moments 5 6:1 Interchangeability 5 6:2 Bending moment and mass of the lamp acting on the lamp holder 5 7 Protection against electric shock 7 8 Insulation resistance and electrical strength 8 8:1 General requirements 8 8:2 Insulation resistance 8 8:3 Electrical strength 8 9 Mechanical strength 8 9:1 General requirements 8 9:2 Torque resistance 8 9:3 Axial pressure of screw-type lamp cap 11 10 Lamp head temperature rise 12 11 Heat resistance13 12 Fire protection and combustion prevention14 13 Fault status 14 13:1 General requirements 14 13:2 Test conditions 14 13:3 Simulation of lights not starting 15 14 Creepage distances and clearances15 15 End-of-life test of lamp 15 15:1 General requirements15 15:2 Test device 15 15:3 Eligibility16 16 Photobiosafety16 16:1 Ultraviolet radiation 16 16:2 Other photobiological effects 16 17 Abnormal work 16 18 Test conditions for dimming lamps and three-position lamps 17 19 All product ratings17 20 Verification of type test 17 21 Lighting Design Information18 Appendix A (informative) All product evaluation19 Appendix B (informative) Lamp design information 21 Reference 22

Foreword

This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document replaces GB 16844-2008 "Safety Requirements for Self-Ballasted Lamps for General Lighting": Compared with GB 16844-2008, except for the structure In addition to adjustments and editorial changes, the main technical changes are as follows: ---Added "This document covers photobiological safety according to the requirements of IEC 62471 and IEC TR62471-2" (see Chapter 1); ---Added the definition of "effective ultraviolet radiation power ratio" (see 3:8); ---Added "mark position" (see 5:4); ---Added "bending moment and mass of the lamp acting on the lamp holder" (see 6:2); ---Added "axial pressure of screw-type lamp holder" (see 9:3); ---Added "simulation of light not starting" (see 13:3); ---Added "creepage distance and clearance" (see Chapter 14); ---Added "end-of-life test of lamp" (see Chapter 15); ---Added "photobiological safety" (see Chapter 16); ---Added "abnormal work" (see Chapter 17); ---Added "test conditions for dimming lamps and three-speed lamps" (see Chapter 18); ---Added "all product evaluation" (see Chapter 19); ---Added "type test verification" (see Chapter 20); ---Added "Lamp Design Information" (see Chapter 21): This document is equivalent to IEC 60968:2015 "Safety Requirements for Self-ballasted Fluorescent Lamps for General Lighting": This document has made the following minimal editorial changes: ---In order to coordinate with the existing standardization documents, the name of the document is changed to "Safety Specifications for Self-ballasted Fluorescent Lamps for General Lighting"; ---Incorporates the contents of technical corrigendum IEC 60968:2015/COR1:2015: Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by China Light Industry Federation: This document is under the jurisdiction of the National Lighting Appliances Standardization Technical Committee (SAC/TC224): This document was drafted by: Hengdian Group Debang Lighting Co:, Ltd:, Foshan Huaquan Electric Lighting Co:, Ltd:, Beijing Electric Light Source Research Research Institute Co:, Ltd:, Weirong Technology Co:, Ltd: The main drafters of this document: Cai Jinbiao, Zhou Chaoyang, Ke Boquan, Huang Shanshi: The previous versions of this document and the documents it replaces are as follows: ---First published as GB 16844-1997 "Safety Requirements for Self-Ballasted Lamps for General Lighting" in:1997, and first revised in:2008; ---This is the second revision: Safety specifications for self-ballasted fluorescent lamps for general lighting

1 Scope

This document applies to tubular fluorescent lamps (self-ballasted fluorescent lamps) that integrate control start-up and stable ignition components: This document stipulates Safety and interchangeability requirements, as well as test methods and conditions for checking compliance: This document is applicable to lamps used as general lighting in homes and similar occasions, with rated voltage 50V~250V, rated frequency 50Hz or 60Hz, the lamp head used meets the requirements of IEC 60061-1: For lamp base and lampholder systems not specifically mentioned in this document, relevant information on safety-related tests provided by the manufacturer applies: The requirements of this document relate only to type testing: Recommended methods for total product inspection and batch product inspection are given in Appendix A: This document has covered photobiological safety according to the requirements of IEC 62471 and IEC TR62471-2: Blue light and infrared hazards are lower than necessary Find the level of identification:

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: ISO 4046-4:2002 Glossary of paper, paperboard, pulp and related terms Part 4: Paper and paperboard grades and processed products products) Note: GB/T 4687-2007 Paper, cardboard, pulp and related terms (ISO 4046-4:2002, MOD) IEC 60061-1 Lampcaps, lampholders and gauges for testing their interchangeability and safety - Part 1: Lampcaps and Note: GB/T 1406:1-2008 Types and dimensions of lamp holders Part 1: Screw-type lamp holders (IEC 60061-1:2005, MOD) GB/T 1406:2-2008 Types and dimensions of lamp holders Part 2: Pin-type lamp holders (IEC 60061-1:2005, MOD) GB/T 1406:3-2021 Types and dimensions of lamp holders Part 3: Prefocused lamp holders (IEC 60061-1:2018, MOD) GB/T 1406:4-2008 Types and dimensions of lamp holders Part 4: Miscellaneous lamp holders (IEC 60061-1:2005, MOD) GB/T 1406:5-2008 Types and dimensions of lamp holders Part 5: Bayonet type lamp holders (IEC 60061-1:2005, MOD) IEC 60061-3 Lampcaps, lampholders and gauges for testing their interchangeability and safety - Part 3: Gauges (Lampcapsand Note: GB/T 1483:1-2008 Inspection Gauges for Lamp Holders and Lamp Holders Part 1: Gauges for Screw-type Lamp Holders and Lamp Holders (IEC 60061-3:2004, MOD) GB/T 1483:2-2008 Inspection Gauges for Lamp Holders and Lamp Holders Part 2: Gauges for Plug-in Lamp Holders and Lamp Holders (IEC 60061-3:2004, MOD) GB/T 1483:3-2008 Inspection Gauges for Lamp Holders and Lamp Holders Part 3: Gauges for Prefocused Lamp Holders and Lamp Holders (IEC 60061-3:2004, MOD) GB/T 1483:4-2009 Inspection Gauges for Lamp Holders and Lamp Holders Part 4: Gauges for Miscellaneous Lamp Holders and Lamp Holders (IEC 60061-3:2004, MOD) GB/T 1483:5-2008 Inspection Gauges for Lamp Holders and Lamp Holders Part 5: Gauges for Bayonet Lamp Holders and Lamp Holders (IEC 60061-3:2004, MOD) rise) Note: GB/T 24392-2009 Measurement method of lamp cap temperature rise (IEC 60360:1998, IDT)

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 16844-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 16844-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 16844-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 16844-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 16844-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16844-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.