Path: Home > GB/T > Page261 > GB/T 16843-2023 Home > Standard_List > GB/T > Page261 > GB/T 16843-2023

GB/T 16843-2023 English PDF

US$624.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16843-2023: Single-capped fluorescent lamps - Safety specifications
Status: Valid

GB/T 16843: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 16843-2023	English	624	Add to Cart	6 days [Need to translate]	Single-capped fluorescent lamps - Safety specifications	Valid	GB/T 16843-2023
GB 16843-2008	English	454	Add to Cart	4 days [Need to translate]	Single-capped fluorescent lamps -- Safety specifications	Valid	GB 16843-2008
GB 16843-1997	English	799	Add to Cart	3 days [Need to translate]	Single-capped fluorescent lamps--Safety specifications	Obsolete	GB 16843-1997

PDF similar to GB/T 16843-2023

Standard similar to GB/T 16843-2023

GB/T 15766.3 GB 19258 GB/T 19258.1 GB 16843 GB/T 16844 GB 16844

Basic data

Standard ID	GB/T 16843-2023 (GB/T16843-2023)
Description (Translated English)	Single-capped fluorescent lamps - Safety specifications
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	K71
Classification of International Standard	29.140.30
Word Count Estimation	34,384
Date of Issue	2023-12-28
Date of Implementation	2026-01-01
Older Standard (superseded by this standard)	GB 16843-2008
Issuing agency(ies)	State Administration for Market Regulation, China National Standardization Administration

GB/T 16843-2023: Single-capped fluorescent lamps - Safety specifications

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 29:140:30 CCSK71 National Standards of People's Republic of China Replace GB 16843-2008 Safety Specifications for Single-Ended Fluorescent Lamps (IEC 61199:2014,IDT) Published on 2023-12-28 Implemented on 2026-01-01 State Administration for Market Regulation Released by the National Standardization Administration Committee

PrefaceⅠ 1 Scope 1 2 Normative references 2 3 Terms and Definitions 3 4 Safety requirements 4 5 Rating 8 Appendix A (Normative) Tests to evaluate lamp cap structure and assembly 14 Appendix B (Normative) Maximum temperature rise of lamp holder and test method 15 Appendix C (Normative) Lamp design information 19 Appendix D (normative) Qualification conditions for type testing 21 Appendix E (normative) Cathode connection method 22 Appendix F (Normative) Non-interchangeability requirements for lamps operating under normal and abnormal conditions 24 Appendix G (normative) Heating test information 27 Appendix H (Informative) Ballast Design Information 28 Appendix I (informative) Lamp holder design information 29 Reference 31

Foreword

This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document replaces GB 16843-2008 "Safety Requirements for Single-ended Fluorescent Lamps": Compared with GB 16843-2008, except for structural adjustments and compilation In addition to editorial changes, the main technical changes are as follows: --- Added "This document also specifies photobiological safety requirements based on IEC 62471" (see Chapter 1); ---Added Table 1 (see Chapter 1); ---Added terms such as "nominal value", "rated value", "SoS value" and "effective ultraviolet radiation power ratio" (see Chapter 3); ---Added Figure 1 (see 4:9); ---Added "ultraviolet radiation" (see 4:11); ---Added "Lamp Holder Design Information" (see 4:14); --- Added tests for GU10q, GZ10q and 2GX13 lamp holders in the test to evaluate the structure and assembly of the lamp holder (see Appendix A); ---Changed the bending moment applied to the lamp tube or lamp holder when conducting lamp holder structure and assembly assessment tests on unused lamps (A:2:1,:2008 version A:2:1); --- Added requirements for the bending moment that the lamp head should be able to withstand (see A:2:2); ---Added "lamp head maximum temperature rise test" (see B:1:3); ---Deleted the requirement that "the lamp should be a specially prepared deactivated finished lamp, that is, without cathode emitting material" (see the:2008 version B:1:2); ---Added the maximum temperature rise of the lamp holder and special tests for lamp holders 2G8, 2GX11, GR14q, and GZ24 in the test methods (see B:2); --- Added regulations on the maximum temperature of lamp holders for lamps with built-in or external starters and lamps without starters in the lamp design information: (See C:2); --- Added regulations for lamp holder temperature (see C:3:2); ---Added 2GX11, GY10q, GZ24q, 2GX13, 2G8, GU10q, GZ10q and GR14q lamp holder cathode connection methods (See Appendix E); --- Added a description of the maximum current of lamps with built-in or external starters and lamps without starters (see F:1); ---Added "non-interchangeability requirements for lamps" (see F:2); ---Added "discharge current safety limit", "SoS safety limit" and "maximum rated power of the lamp" in Table F:1 (see Appendix F): This document is equivalent to IEC 61199:2014 "Safety Specification for Single-ended Fluorescent Lamps": This document has made the following minimal editorial changes: ---Added notes to Table F:1 and Figure G:1: Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by China Light Industry Federation: This document is under the jurisdiction of the National Lighting Appliances Standardization Technical Committee (SAC/TC224): This document was drafted by: Zhejiang Sunshine Lighting Electrical Appliances Group Co:, Ltd:, Foshan Huaquan Electric Lighting Co:, Ltd:, Anhui Nengtong New Energy Technology Co:, Ltd:, Weirong Technology Co:, Ltd:, National Electric Light Source Quality Supervision and Inspection Center (Beijing), Beijing Electric Light Source Research LIMITED: The main drafters of this document: Li Xiaobing, Ke Boquan, Wang Linqiao, Wei Wei, Li Yanjie, and Zhang Bo: The previous versions of this document and the documents it replaces are as follows: ---First published as GB 16843-1997 in:1997, first revised in:2008; ---This is the second revision: Safety Specifications for Single-Ended Fluorescent Lamps

1 Scope

This document specifies the safety requirements for single-ended fluorescent lamps for general lighting using the lamp bases listed in Table 1: This document specifies the manufacturer's overall product evaluation results, based on inspection records of finished lamps, demonstrating that his product complies with this document: specific methods required: This method is also used for product certification: This document establishes in detail the batch inspection procedures, which make limited Evaluate: This document also specifies the photobiological safety requirements according to IEC 62471: Blue light and infrared hazards are below the levels required for labeling: Note: The qualification conditions of this document only involve safety indicators and do not consider the performance of single-ended fluorescent lamps for general lighting, such as luminous flux, color, start-up and operating characteristics: Information on the performance of single-ended fluorescent lamps for general lighting is found in IEC 60901: Table 1 Data pages referencing IEC 60061 Lamp Type Data page number IEC 60061-1 Lamp holder IEC 60061-3 Lamp gauge 2G7 2GX7 2G8 GR8 G10q GR10q GX10q GY10q GZ10q 2G10 2G11 2GX13 G23 GX23 G24, GX24 GZ24q GX32 7004-102 7004-103 7004-141 7004-68 7004-54 7004-77 7004-123 7004-84 7004-85 7004-124 7004-118 7004-82 7004-82A 7004-125 7004-69 7004-86 7004-78 7004-87 7006-102 7006-102 7006-141, 141H, 141J, 141K 7006-68A, 68B, 68E 7006-79 7006-77A, 68B, 68E 7006-123, 123A 7006-79, 84, 84A, 84B 7006-79, 85, 85A 7006-79 7006-118 7006-82 7006-82F, 82G, 82H 7006-125A, 125B 7006-69 7006-86 7006-78 7006-87 a is under study: Lamps that comply with this document, when the power supply voltage is within the range of 90% to 110% of the rated power supply voltage of the ballast used, are in compliance with the requirements of this document: Ballast according to IEC 61347-2-3 or ballast assembly according to IEC 61347-2-8 with starting device according to IEC 60155 (if applicable) sets and can be expected to operate safely when used in luminaires complying with IEC 60598-1:

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 16843-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 16843-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 16843-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 16843-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 16843-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16843-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.