|
US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 94061-2012: Testing method of air pressure in the air trough on the profiled reed for air jet weaving machines
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 94061-2012 | English | 149 |
Add to Cart
|
2 days [Need to translate]
|
Testing method of air pressure in the air trough on the profiled reed for air jet weaving machines
| Valid |
FZ/T 94061-2012
|
PDF similar to FZ/T 94061-2012
Basic data | Standard ID | FZ/T 94061-2012 (FZ/T94061-2012) | | Description (Translated English) | Testing method of air pressure in the air trough on the profiled reed for air jet weaving machines | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W90 | | Classification of International Standard | 59.120.30 | | Word Count Estimation | 5,530 | | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 2 (No. 158 overall) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the test jet loom reeds airflow trough pressure value test principle, instruments, samples, conditions, procedures and results. This standard applies to test jet loom reeds airflow trough pressure values. | FZ/T 94061-2012: Testing method of air pressure in the air trough on the profiled reed for air jet weaving machines
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Testing method of air pressure in the air trough on the profiled reed for air jet weaving machines
ICS 59.120.30
W90
People's Republic of China textile industry standards
Jet loom profiled reed slot airflow pressure value
experiment method
Issued on. 2012-12-28
2013-06-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Textile Industry Association.
This standard by the national textile machinery and accessories Textile Equipment Standardization Technical Committee Technical Committee (SAC/TC215/SC2)
Centralized.
This standard was drafted. Changzhou reed Ltd., Shaoxing City Water-rich Textile Equipment Co., Ltd. Shaoxing Dingfeng Textile Equipment Co.,
Secretary, National Textile Equipment Quality Supervision and Inspection Center, Chongqing Jinmao Textile Equipment Co., Ltd.
The main drafters of this standard. Guo Kang, Cell Biology and Genetics, Shiyue Hao, Ni g Kong, the waters husband, Du Peng, Yu Dingquan, light Pei Xia, Wang Keping.
Jet loom profiled reed slot airflow pressure value
experiment method
1 Scope
This standard specifies the test jet loom Test principle reeds airflow groove pressure value, instruments, samples, conditions, procedures and results.
This standard applies to test jet loom profiled reed slot airflow pressure values.
2 test principle
Forming a gas stream containing gas flow stream reed groove information via nozzles in reed stream tank pressure sensor signal converted by the control
The data processing device to obtain reed slot airflow pressure value and pressure change values.
3 Test Instruments
Jet loom profiled reed slot airflow pressure value tester shall meet the following requirements.
a) an adjustable nozzle jet pressure is 0.3MPa ~ 0.6MPa;
b) an adjustable distance between the nozzle and the receiving end is 70mm ~ 110mm;
c) applicable reeds airflow groove height of 51mm, 54mm, 56mm, 57mm.
4 Sample
The sample is jet loom profiled reed products.
5 Test conditions
5.1 Test standard environment
5.1.1 Temperature. (25 ± 5) ℃.
5.1.2 Relative humidity. (60 ± 5)%.
5.2 Sample conditioning
Sample placed no less than 2h under standard test conditions.
6 Test procedure
6.1 according to the tester's instructions to adjust the tester.
6.2 The sample was placed in the tester's test bench.
6.3 The nozzle is placed at one end of the sample, start the tester pressure value until the other end.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 94061-2012_English be delivered?Answer: Upon your order, we will start to translate FZ/T 94061-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 94061-2012_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 94061-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|