|
US$199.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 94007.3-2013: Twin wire healds. Part 3: Twin steel sheet healds for weaving machines wih heald frames
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 94007.3-2013 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Twin wire healds. Part 3: Twin steel sheet healds for weaving machines wih heald frames
| Valid |
FZ/T 94007.3-2013
|
PDF similar to FZ/T 94007.3-2013
Basic data | Standard ID | FZ/T 94007.3-2013 (FZ/T94007.3-2013) | | Description (Translated English) | Twin wire healds. Part 3: Twin steel sheet healds for weaving machines wih heald frames | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W94 | | Classification of International Standard | 59.120.30 | | Word Count Estimation | 8,898 | | Older Standard (superseded by this standard) | FZ/T 94008-1992 | | Quoted Standard | GB/T 191; GB/T 2828.1; GB/T 2829; GB/T 4340.1; GB/T 4955; GB/T 19552-2004; GB/T 19554.1-2004; GB/T 19554.2-2004 | | Regulation (derived from) | Ministry of Industry and Information Notice No. 52 of 2013; industry standard for filing Notice 2013 No. 12 (No. 168 overall) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies: meet JB/T 8135. 6-delivery spools with conical container basic dimensions. | FZ/T 94007.3-2013: Twin wire healds. Part 3: Twin steel sheet healds for weaving machines wih heald frames
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Twin wire healds.Part 3. Twin steel sheet healds for weaving machines wih heald frames
ICS 59.120.30
W94
People's Republic of China textile industry standards
Replacing FZ/T 94008-1992
Fully Part 3. Fully loom heald frames with steel
Twinwirehealds-Part 3. Twinsteelsheethealdsforweavingmachines
withhealdframes
Issued on. 2013-10-17
2014-03-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
FZ/T 94007 "Comprehensive" is divided into the following three parts.
--- Part 1. Jacquard woven fully mechanized eye with inserts of steel wire;
--- Part 2. Fully loom heddle wire;
--- Part 3. mechanized loom heald frames with steel.
This section FZ/T Part of 394,007.
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This section instead of FZ/T 94008-1992 "steel mechanized looms." Compared with the FZ/T 94008-1992, in addition to editorial changes outside
The main technical changes are as follows.
--- Revised Product Categories (see 31, Chapter 3 of the 1992 edition.);
--- Deleted Figure 1, Figure 2 and Table 2, Table 3 (see the 1992 version of the 3.4 to 3.6);
--- Modify the labeling of products (see 32, 1992 version 3.7.);
--- Modify the inspection rules (see Chapter 6, Section 6 of the 1992 edition);
--- Modified "logo, packaging, transportation, storage" (see Chapter 7, 1992 edition, Chapter 7).
This part is proposed by the China Textile Industry Association.
This part of the National Textile machinery and accessories Textile Equipment Standardization Technical Committee Technical Committee (SAC/TC215/SC2)
Centralized.
This section is drafted. Shaoxing Dingfeng Textile Equipment Co., Ltd., Shaanxi Institute of textile equipment.
The main drafters of this section. Fu Xiaoyan, Zhao Yusheng, Yu Dingya, light Xia culture.
Introduction
Tantamount to the adoption of international standards of GB/T 19554.1-2004/ISO 11677-1.1994 "Textile machinery and accessories steel ear opening heddle
Heald heald rod and the corresponding main dimensions - Part 1. C Type Fully ear ", GB/T 19554.2-2004/ISO 11677-2.1994" Textile Machinery
And Annex opening heddle mechanized steel ear and the corresponding heald rod main dimensions - Part 2. J-type Fully ear "and modify using the ISO 363.1992 system
Set national standards GB/T 19552-2004 "Textile machinery and accessories closed fully mechanized steel ear size", it is only included steel heddle loom
Heald scope, size, although you can play an active role in international trade in order to eliminate technical barriers limited; however, it is not only the technical elements missing
Difficult to meet the required standard under the market economy system, and no maneuverability. FZ/T 94008-1992 "steel mechanized loom" Although
Covering all types of steel mechanized looms and lists its dimensions, but has been unable to meet the requirements of the development of weaving technology and standards
The error should be corrected; therefore, this part of the basis of FZ/T 94008-1992 improve on the above-mentioned three essential part of national standards
Technical elements. In actual use this section should closely matching with the above-mentioned three national standards.
Fully Part 3. Fully loom heald frames with steel
1 Scope
FZ/T 94007 provisions of this part of the loom heddle with mechanized steel (hereinafter referred to as "steel mechanized") classification and marking requirements, test side
Method, inspection rules and packaging, labeling, storage.
This section applies to steel ensemble.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
(ISO 2859-1.1999, IDT)
GB/T 2829 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 4340.1 metallic materials - Vickers hardness test - Part 1. Test methods
GB/T 4955 Metallic coatings - Measurement of coating thickness anodic dissolution coulometry
GB/T 19552-2004 Textile machinery and accessories closed fully mechanized steel ear size
GB 19554.1-2004 Textile machinery and accessories ear opening heddle steel and mechanized Part 1/T main dimensions corresponding heald rod
Sub. C Type Fully ear
PART 2 GB/T 19554.2-2004 Textile machinery and accessories mechanized steel ear opening heddle and corresponding heald rod main dimensions
Sub. J fully mechanized ear
3 Classification and Marking
3.1 Classification
3.1.1 Depending on the product structure, divided into separate mechanized steel (model omitted) and double row mechanized steel (model P).
3.1.2 According to GB/T 19552-2004, GB/T 19554.1-2004, GB/T 19554.2-2004 in mechanized ear Structure Classification Regulations
Fixed, into open-ended and closed-type steel steel fully mechanized.
3.1.3 According Fully ear shape, is divided into S-type mechanized ear, D-mechanized ear, C-type mechanized ear, J and O-type fully mechanized ear ear, Table 1.
Table 1 fully mechanized steel ear shape and type
No. 12345
shape
Model SDCJO
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 94007.3-2013_English be delivered?Answer: Upon your order, we will start to translate FZ/T 94007.3-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 94007.3-2013_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 94007.3-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|