|
US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 94007.1-2013: Twin wire healds. Part 1: Twin wire healds with inset mail for jacquard weaving
Status: Valid FZ/T 94007.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 94007.1-2013 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Twin wire healds. Part 1: Twin wire healds with inset mail for jacquard weaving
| Valid |
FZ/T 94007.1-2013
|
| FZ/T 94007-1992 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Fully Wire Loom
| Obsolete |
FZ/T 94007-1992
|
PDF similar to FZ/T 94007.1-2013
Basic data | Standard ID | FZ/T 94007.1-2013 (FZ/T94007.1-2013) | | Description (Translated English) | Twin wire healds. Part 1: Twin wire healds with inset mail for jacquard weaving | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W94 | | Classification of International Standard | 59.120.30 | | Word Count Estimation | 8,825 | | Older Standard (superseded by this standard) | FZ/T 94007-1992 | | Quoted Standard | GB/T 191; GB/T 2828.1; GB/T 2829; GB/T 4340.1; GB/T 24381-2009 | | Regulation (derived from) | Ministry of Industry and Information Notice No. 52 of 2013; industry standard for filing Notice 2013 No. 12 (No. 168 overall) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies: Jacquard weaving inserts comprehensive eye wire comprehensive (hereinafter referred to as "Jacquard mechanized") classification and marking requirements, test methods, inspection rules and the packaging, labeling, storage. This st | FZ/T 94007.1-2013: Twin wire healds. Part 1: Twin wire healds with inset mail for jacquard weaving---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Twin wire healds.Part 1. Twin wire healds with inset mail for jacquard weaving
ICS 59.120.30
W94
People's Republic of China textile industry standards
Section instead of FZ/T 94007-1992
Fully Part 1. jacquard weaving
Insert the wire fully mechanized eye
Twinwirehealds-Part 1. Twinwirehealdswithinsetmail
Issued on. 2013-10-17
2014-03-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
FZ/T 94007 "Comprehensive" is divided into the following three parts.
--- Part 1. Jacquard woven fully mechanized eye with inserts of steel wire;
--- Part 2. Fully loom heddle wire;
--- Part 3. mechanized loom heald frames with steel.
This section FZ/T Part of 194,007.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section instead of FZ/T 94007-1992 "mechanized loom wire" in part, the content has not been replaced with a wire loom heddle
Fully, this part will be included FZ/T Part of 294,007. This part FZ/T 94007-1992 in Jacquard wire
Fully as the main content, compared with FZ/T 94007-1992, the major technical changes in addition to editorial changes outside as follows.
--- Modify the standard name;
--- Remove Figure 1, Table 1 and Figure 2, Table 2 (see 1992 edition of 3.2.2 and 3.3.3);
--- Remove the labeling of products (see 1992 edition 3.4);
--- Remove the heald thickness not less than 0.60mm and wire fastness when (see 1992 edition 4.2);
--- Modify the inspection rules (see Chapter 6, Section 6 of the 1992 edition);
--- Modified "logo, packaging, transportation, storage" (see Chapter 7, 1992 edition, Chapter 7).
This part is proposed by the China Textile Industry Association.
This part of the National Textile machinery and accessories Textile Equipment Standardization Technical Committee Technical Committee (SAC/TC215/SC2)
Centralized.
This section drafted by. consciousness Zhejiang Industrial Co., Ltd., Shaanxi Institute of textile equipment.
The main drafters of this section. Fu Xiaoyan, Zhao Yusheng, Wang consciousness, Wang Lifang.
Introduction
Revise international standards ISO 365. 1982 developed by GB/T 24381-2009 "Textile machinery and accessories Jacquard weaving Fully insert
Comprehensive eye wire, "including only the Jacquard weaving insert the wire fully mechanized eye scope, size, label, although the elimination of international trade
Limited technical barriers to play an active role; however, it is not only difficult technical elements missing meet under our criteria for a market economy
Seek, and no maneuverability. FZ/T 94007-1992 "mechanized loom wire" Although covering all types of steel mechanized looms used and lists
Its dimensions, but has been unable to meet the requirements of the development of weaving technology, and standard error should be corrected; therefore, in this section
Improve the GB/T 24381-2009 missing part of the technical elements on the basis 94007-1992 FZ/T . In actual use this section
, Should closely matching with the GB/T 24381-2009.
Fully Part 1. jacquard weaving
Insert the wire fully mechanized eye
1 Scope
FZ/T 94007 in the provisions of this part of the Jacquard weaving insert the wire fully mechanized eye (hereinafter referred to as "figure-harness") of classification and labeling, to
Requirements, test methods, inspection rules, packaging, labeling, storage.
This section applies to the figure-harness.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
(ISO 2859-1.1999, IDT)
GB/T 2829 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 4340.1 metallic materials - Vickers hardness test - Part 1. Test methods
GB/T 24381-2009 Textile machinery and accessories Jacquard weaving insert the wire fully mechanized eye
3 Classification and Marking
3.1 Classification
3.1.1 According to the provisions of GB/T 24381-2009 in mechanized ear shape classification, divided into type A and type B jacquard jacquard Fully mechanized. According Fully ear
Similarity, A type is divided into AⅠ type (upper and lower heald ear shapes to "O" shape) and AⅡ type (Fully ear shape for the "O" shape, ear shape under mechanized
Long "O" shape). According to the pre-mechanized ear bending state, B type is divided into BⅠ type (on the ear by a mechanized straight bent "U" shape, the ear is fully under
"O" shape) and BⅡ type (Summing ear bent "U" shape, the ear is fully under "O" shape).
3.1.2 Comprehensive eye shaped manner, divided into type 1 (insert Comprehensive eye) and type 2 (after insert twist into mechanized eye).
3.2 mark
Fully jacquard labeling method should comply with GB/T 24381-2009 provisions of Chapter 3.
4 Requirements
4.1 jacquard basic size limit deviation shall be fully and the following requirements.
a) Size comply with GB/T 24381-2009 defined in Chapter 2;
b) basic size limit deviation in line with Table 1.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 94007.1-2013_English be delivered?Answer: Upon your order, we will start to translate FZ/T 94007.1-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 94007.1-2013_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 94007.1-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version FZ/T 94007.1-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 94007.1-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|