|
US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 93086.2-2012: Testing method of lattice apron for compact spinning process. Part 2: Interstice rate
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 93086.2-2012 | English | 149 |
Add to Cart
|
2 days [Need to translate]
|
Testing method of lattice apron for compact spinning process. Part 2: Interstice rate
| Valid |
FZ/T 93086.2-2012
|
PDF similar to FZ/T 93086.2-2012
Basic data | Standard ID | FZ/T 93086.2-2012 (FZ/T93086.2-2012) | | Description (Translated English) | Testing method of lattice apron for compact spinning process. Part 2: Interstice rate | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W90 | | Classification of International Standard | 59.120.10 | | Word Count Estimation | 5,514 | | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 2 (No. 158 overall) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the test compact spinning with lattice apron porosity test principle, instruments, samples, conditions, procedures and results. This section applies to tests of cotton, wool, hemp, chemical fiber and blended with compact spinning c | FZ/T 93086.2-2012: Testing method of lattice apron for compact spinning process. Part 2: Interstice rate
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Testing method of lattice apron for compact spinning process.Part 2. Interstice rate
ICS 59.120.10
W90
People's Republic of China textile industry standards
Spinning ring test methods for gathering grid
Part 2. porosity
Part 2. Intersticerate
Issued on. 2012-12-28
2013-06-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
FZ/T 93086 "compact spinning with lattice apron test method" is divided into two parts.
--- Part 1. inner perimeter;
--- Part 2. porosity.
This section FZ/T Part of 293,086.
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This part is proposed by the China Textile Industry Association.
This part of the National Textile machinery and accessories Textile Equipment Standardization Technical Committee Technical Committee (SAC/TC215/SC2)
Centralized.
This section drafted by. National Textile Equipment Quality Supervision and Inspection Center, Changzhou City and Textile Machinery Manufacturing Co., Ltd.
The main drafters of this section. Li Wei, Cell Biology and Genetics, Cuigui Sheng, Tang new.
Spinning ring test methods for gathering grid
Part 2. porosity
1 Scope
FZ/T 93086 provisions of this part of the test with the test principles of compact spinning with lattice apron porosity, instruments, samples, conditions, procedures, and
result.
This section applies to the test of cotton, wool, linen, chemical fiber and blending compact spinning with lattice apron porosity.
2 test principle
The same percentage of negative pressure system, the grid is placed before the test laps, after the pressure value, expressed its porosity.
3 Test Instruments
Compact spinning with lattice apron porosity tester shall meet the following requirements.
a) 1, the device consists of a tester may generate (2500 ± 30) of the tubular seal body composed Pa negative pressure, the seal body
Party opened a length of 17mm, wide oval test slot of 2mm;
b) grid circle on the tester by the tension of 5.0N;
c) indication deviation of ± 60Pa;
d) to test the groove center line, full coverage test test head slot.
Millimeters
Explanation.
1 --- test head;
2 --- test slot;
3 --- seal.
Figure 1 schematically tester device
4 Sample
The sample is finished mesh circle.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 93086.2-2012_English be delivered?Answer: Upon your order, we will start to translate FZ/T 93086.2-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 93086.2-2012_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 93086.2-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|