|
US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 93086.1-2012: Testing method of lattice apron for compact spinning process. Part 1: Inner perimeter
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 93086.1-2012 | English | 149 |
Add to Cart
|
2 days [Need to translate]
|
Testing method of lattice apron for compact spinning process. Part 1: Inner perimeter
| Valid |
FZ/T 93086.1-2012
|
PDF similar to FZ/T 93086.1-2012
Basic data | Standard ID | FZ/T 93086.1-2012 (FZ/T93086.1-2012) | | Description (Translated English) | Testing method of lattice apron for compact spinning process. Part 1: Inner perimeter | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W90 | | Classification of International Standard | 59.120.10 | | Word Count Estimation | 5,581 | | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 2 (No. 158 overall) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the measurement test instrument with compact spinning circle the perimeter of the grid, the sample, conditions, procedures and results. This standard applies to the measurement of cotton, wool, linen, chemical fiber and blended wit | FZ/T 93086.1-2012: Testing method of lattice apron for compact spinning process. Part 1: Inner perimeter
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Testing method of lattice apron for compact spinning process.Part 1. Inner perimeter
ICS 59.120.10
W90
People's Republic of China textile industry standards
Spinning ring test methods for gathering grid
Part 1. the inner perimeter
Part 1. Innerperimeter
Issued on. 2012-12-28
2013-06-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
FZ/T 93086 "compact spinning with lattice apron test method" is divided into two parts.
--- Part 1. inner perimeter;
--- Part 2. porosity.
This section FZ/T Part of 193,086.
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This part is proposed by the China Textile Industry Association.
This part of the National Textile machinery and accessories Textile Equipment Standardization Technical Committee Technical Committee (SAC/TC215/SC2)
Centralized.
This section drafted by. National Textile Equipment Quality Supervision and Inspection Center, Changzhou City and Textile Machinery Manufacturing Co., Ltd.
The main drafters of this section. Cell Biology and Genetics, Guo Hong, Cuigui Sheng, Tang new.
Spinning ring test methods for gathering grid
Part 1. the inner perimeter
1 Scope
FZ/T 93086 provisions of this part of the measure with the test instrument compact spinning circle the perimeter of the grid, specimens, conditions, procedures and results.
This section applies to the measurement of cotton, wool, linen, chemical fiber and blended with the grid compact spinning circle perimeter.
2 Test Instrument
Compact spinning circle with perimeter grid tester shall meet the following requirements.
a) shown in Figure 1, the tester measuring device consists of a fixed and a measuring rod parallel to the activity measuring rods; measuring rod straight
Diameter 10mm, length 40mm; activity measuring rod displacement speed of not more than 120mm/min; tester shows error of not
Greater than 0.02mm, can be displayed inside the perimeter and inside diameter.
Explanation.
1 --- grid ring;
2 --- fixed measuring rod;
3 --- activity measuring rod.
Figure 1 schematically tester measuring device
b) When measuring the tension applied to the sample to 5.0N.
3 Sample
The sample is finished mesh circle.
4 Test conditions
4.1 test standard environment
4.1.1 Temperature. (23 ± 2) ℃.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 93086.1-2012_English be delivered?Answer: Upon your order, we will start to translate FZ/T 93086.1-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 93086.1-2012_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 93086.1-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|