Path:
Home >
FZ/T >
Page31 > FZ/T 01117-2012
|| Home >
Standard_List >
FZ/T >
Page31 > FZ/T 01117-2012
Price & Delivery
US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 01117-2012: Textiles. Determination of the anti-puncture properties. Edged blade
Status: Valid
| Std ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status |
| FZ/T 01117-2012 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Textiles. Determination of the anti-puncture properties. Edged blade
| Valid |
Basic data
| Standard ID | FZ/T 01117-2012 (FZ/T01117-2012) |
| Description (Translated English) | Textiles. Determination of the anti-puncture properties. Edged blade |
| Sector / Industry | Spinning & Textile Industry Standard (Recommended) |
| Classification of Chinese Standard | W04 |
| Classification of International Standard | 59.080.30 |
| Word Count Estimation | 8,856 |
| Quoted Standard | GB/T 4669; GB/T 6529 |
| Regulation (derived from) | Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 2 (No. 158 overall) |
| Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China |
| Summary | This standard specifies the method for the determination using a cutting tool performance textiles puncture test methods. This standard applies to textiles with anti- puncture resistance, can refer to other products used. |
FZ/T 01117-2012: Textiles. Determination of the anti-puncture properties. Edged blade
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Textiles.Determination of the anti-puncture properties.Edged blade
ICS 59.080.30
W04
People's Republic of China textile industry standards
Textiles - Determination of anti-puncture performance
Edged cutter method
Issued on. 2012-12-28
2013-06-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee on Basic Standards Subcommittee Textiles (SAC/TC209/SC1) centralized.
This standard was drafted. China Textile Academy, People's Republic of China Fujian Exit Inspection and Quarantine.
The main drafters of this standard. Wang Jing Hong, Li Shanshan, similar Bao, Lin Zhiwu.
Textiles - Determination of anti-puncture performance
Edged cutter method
1 Scope
This standard specifies the test method for determining the performance of the textile anti-puncture method using an edged tool.
This standard applies to textiles with anti-puncture performance can refer to the use of other products.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Determination of length and mass per unit area GB/T 4669 Textiles - Woven fabrics unit mass
GB/T 6529 Textiles Standard conditioning and testing atmosphere
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Anti-puncture performance anti-punctureproperties
Textiles resistance is penetrated tool to prevent puncture or to puncture efficiency is expressed.
3.2
Anti-piercing anti-punctureforces
Penetrates the sample required tool most vigorously, the unit is N.
3.3
Anti-puncture efficiency of anti-punctureefficiencies
When it is required to penetrate the sample and the ratio of the maximum force per unit mass of the sample area, the unit is (N · m2)/kg.
Principle 4
In a direction perpendicular to the sample of the tool at a constant speed through the sample was measured in this process required the most vigorously. If desired, remember
The sample being recorded during penetration graph tool displacement and load.
5 Equipment & Supplies
5.1 Tester
Vertical stroke of the tool is not less than 100mm, the tool can be set to puncture speed (500 ± 10) mm/min; instrument has a tool displacement and pressure
Force display system, as necessary, with the curve recording, data processing and other functions, measuring error ≤2%.
Tips & Frequently Asked Questions:
Question 1: How long will the true-PDF of FZ/T 01117-2012_English be delivered?
Answer: Upon your order, we will start to translate FZ/T 01117-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.
Question 2: Can I share the purchased PDF of FZ/T 01117-2012_English with my colleagues?
Answer: Yes. The purchased PDF of FZ/T 01117-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.
Question 3: Does the price include tax/VAT?
Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs):
List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?
Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.