GB/T 39895-2021 PDF English
Search result: GB/T 39895-2021_English: PDF (GB/T39895-2021)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 39895-2021 | English | 95 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Remanufactured automotive components -- Specifications of labels
| Valid |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 39895-2021 Related standards: GB/T 39895-2021
PDF Preview: GB/T 39895-2021
GB/T 39895-2021: PDF in English (GBT 39895-2021) GB/T 39895-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.030.50
T 08
Remanufactured automotive components -
Specifications of labels
ISSUED ON: MARCH 09, 2021
IMPLEMENTED ON: OCTOBER 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Label requirements ... 5
5 Labeling position ... 6
6 Labeling methods ... 6
7 Labeling requirements ... 7
Remanufactured automotive components -
Specifications of labels
1 Scope
This Standard specifies the terms and definitions, labeling requirements,
labeling positions, labeling methods and labeling requirements of labels for
remanufactured automotive components.
This Standard applies to remanufactured automotive components; it can be
implemented for the remanufactured components of other power-driven
vehicles by reference.
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For
undated references, the latest edition (including all amendments) applies to this
document.
GB/T 16288-2008, Marking of plastics products
GB/T 25978-2018, Road vehicle - Plates and label
GB/T 26989, Automobile recovery - Terminology
3 Terms and definitions
Terms and definitions determined by GB/T 26989 and the following ones are
applicable to this document.
3.1 Remanufactured automotive components
Products, of which the used automotive components are basically restored to
the original product's technical performance and product quality after a series
of remanufacturing processes.
3.2 Mark for remanufactured automotive components
A pattern which is used to indicate that the automotive component is a
remanufactured product.
3.3 Labels for remanufactured automotive components
An information combination of marks, words, numbers, symbols and other
descriptive contents, which is used to identify remanufactured automotive
components.
4 Label requirements
4.1 Label composition
The labels for remanufactured automotive components shall include at least the
following:
a) Mark for remanufactured automotive components as specified in 4.2;
b) Chinese name of the product;
c) Name or registered trademark of the remanufacturing company;
d) Serial number of the remanufactured product;
e) Production date of the remanufactured product;
f) Specifications or model of the remanufactured product;
g) Implementation quality standards of the remanufactured product;
h) Instructions that the product can only be used for after-sales maintenance,
and cannot be used for new product assembly.
4.2 Marking requirements
4.2.1 General requirements
The mark for remanufactured automotive components shall be clear and easy
to identify.
4.2.2 Marking format
4.2.2.1 The mark for remanufactured automotive components is shown in
Figure 1. The mark is composed of two parts: a triangle recycling symbol and
the letter symbol of RM (abbreviation of Remanufacture in English). The triangle
recycling symbol shall meet the requirements in Table 1 of GB/T 16288-2008
for the graphic requirements of recycling.
4.2.2.2 The letter symbol "RM" shall be in the center of the triangle recycling
symbol; the letters shall be in bold.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|