| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29074-2012 | English | 150 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Requirements for qualification of space components
| Valid |
GB/T 29074-2012
|
PDF similar to GB/T 29074-2012
Basic data | Standard ID | GB/T 29074-2012 (GB/T29074-2012) | | Description (Translated English) | Requirements for qualification of space components | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | V25 | | Classification of International Standard | 49.045 | | Word Count Estimation | 14,126 | | Quoted Standard | GB/T 19000; GB/T 19001; GB/T 19011 | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the conditions for aerospace components identification, assessment requirements, qualification testing and identification of the whole process of management and technical requirements. This standard applies to aerospace components | GB/T 29074-2012: Requirements for qualification of space components---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Requirements for qualification of space components
ICS 49.045
V25
National Standards of People's Republic of China
Aerospace Component identification requirements
Issued on. 2012-12-31
2013-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Aerospace Science and Technology Corporation.
This standard by the National Aerospace Technology and Application of Standardization Technical Committee (SAC/TC425) centralized.
This standard drafting unit. China Academy of Space Technology.
The main drafters of this standard. Wang Jianguo, Wang Xia, Zhang Hongqi, Zhuheng Jing, Han Zhen water, Li Haiyan.
Introduction
This standard belongs to China Aerospace national standards. China Aerospace national standards applicable to national standards in the field of aerospace and revision
Management, covering the management of space, space technology, space applications and services of the three fields, is to guide spacecraft and launch vehicle project management, engineering research
System, space launch services, in-orbit satellite applications based activities.
- Lifting aerospace electronic components of system performance based on performance indicators based on its quality level to determine the long-term stability and
Aerospace supply is an important issue that must be addressed with management components. With the rapid development of technology components, high integration, high performance,
High index components after another, but if it meets the requirements of aerospace applications, the need for identification of the work in accordance with the relevant guidelines. Meanwhile, the international
Space cooperation increasingly widespread in the selection of certification components also need to have a standardized and unified identification guidelines. Therefore, further guidance and regulation
Fan aerospace components with identification, to ensure product quality standard is formulated.
Aerospace Component identification requirements
1 Scope
This standard specifies the conditions identified aerospace components, assessment requirements, qualification tests and technical requirements for the identification and management of the whole process.
This standard applies to the identification of aerospace components accreditation bodies of domestic aerospace components, other components in case of need identified
When may refer.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member, undated references, the latest edition (including any amendments) applies to this document.
GB/T 19000 Quality management systems Fundamentals and vocabulary
GB/T 19001 Quality Management System Requirements
GB/T 19011 quality and (or) environmental management systems auditing
3 Terms and Definitions
GB/T 19000 and defined by the following terms and definitions apply to this document.
3.1
Process Validation file processidentificationdocument
All files associated with a particular production process control-related components, including.
a) production flow chart;
b) process specifications;
c) inspection procedures;
d) structural components (including pictures);
e) test procedure;
f) production plant related to quality control documents.
3.2
Inconsistent non-conformance
Deviation and the applicable component of a file properties.
4 Abbreviations
The following abbreviations apply to this document.
CA --- constructionanalysis, structural analysis;
DPA --- destructivephysicalanalysis, destructive physical analysis;
PID --- processidentificationdocument, process validation documents;
QDSC --- qualificationdepartmentforspacecomponents, aerospace components accreditation bodies;
QPLS --- qualifiedpartslistsforspace, aerospace components accreditation directory.
|