Powered by Google www.ChineseStandard.net Database: 189760 (25 May 2024)

GB/T 28878.9-2019 PDF in English


GB/T 28878.9-2019 (GB/T28878.9-2019, GBT 28878.9-2019, GBT28878.9-2019)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 28878.9-2019English90 Add to Cart 0-9 seconds. Auto-delivery. Specification of the rotating component in space science experiments -- Part 9: Delivery Valid


Standards related to: GB/T 28878.9-2019

GB/T 28878.9-2019: PDF in English (GBT 28878.9-2019)

GB/T 28878.9-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 49.035
V 22
Specification of the rotating component in space
science experiments - Part 9: Delivery
ISSUED ON: JUNE 04, 2019
IMPLEMENTED ON: OCTOBER 01, 2019
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Terms and definitions ... 4 
4 Delivery preparation ... 4 
5 Delivery inspection ... 5 
6 Product delivery ... 7 
Specification of the rotating component in space
science experiments - Part 9: Delivery
1 Scope
This Part of GB/T 28878 specifies the requirements for the delivery preparation,
delivery inspection and product delivery of rotating component.
This Part applies to the delivery of rotating component in space science
experiments. The delivery of rotating component of other payloads and
spacecraft platforms can refer to it for use.
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For
undated references, the latest edition (including all amendments) applies to this
document.
GB/T 14481-2008, Test procedure for single-phase synchronous machines
GB/T 20638-2006, General specification for stepping motors
GB/T 25915.1-2010, Cleanrooms and associated controlled environments.
Part 1: Classification of air cleanliness
GB/T 28878.1, Specification of the rotating component in space science
experiments. Part 1: General requirements of design
GB/T 28878.6-2016, Specification of the rotating component in space
science experiments. Part 6: Property testing
3 Terms and definitions
Terms and definitions determined by GB/T 28878.1 are applicable to this
document.
4 Delivery preparation
4.1 Product self-inspection
The delivered product shall be inspected by the contractor in accordance with
the following documents:
a) contract (if any);
b) technical requirements (technical agreement or development task book);
c) product specifications or acceptance test details.
4.2 Quality control inspection
Before the product is delivered, the manufacturer shall check the product
process control and prepare corresponding documents for the user to check.
The quality control inspection shall include:
a) quality assurance of raw materials;
b) process quality control, including key parts, important parts, key processes
and special process control records;
c) documents and records related to quality assurance of outsourced
products;
d) calibration and verification of test equipment, measurement equipment
and measuring instruments;
e) records of quality problems and corrective actions that are taken during
production;
f) other quality control conditions that shall be checked.
4.3 Delivery document inspection
The delivery documents shall be inspected before delivery, including:
a) certificates and resumes;
b) test report;
c) reliability test report;
d) instruction manual.
5 Delivery inspection
5.1 Inspection responsibility
......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.