HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (2 Feb 2025)

GB 1886.352-2021 PDF English


Search result: GB 1886.352-2021 English: PDF
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB 1886.352-2021English170 Add to Cart 0-9 seconds. Auto-delivery. National Food Safety Standard - Food Additive - β-cyclodextrin Valid
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB 1886.352-2021     Related standards: GB 1886.352-2021

PDF Preview: GB 1886.352-2021


GB 1886.352-2021: PDF in English

GB 1886.352-2021 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA National Food Safety Standard - Food Additive - β-cyclodextrin ISSUED ON: SEPTEMBER 07, 2021 IMPLEMENTED ON: MARCH 07, 2022 Issued by: National Health Commission of the People's Republic of China; State Administration for Market Regulation. Table of Contents Foreword ... 3  1 Scope ... 4  2 Molecular formula and relative molecular mass ... 4  3 Technical requirements ... 4  Appendix A Inspection method ... 6  National Food Safety Standard - Food Additive - β- cyclodextrin 1 Scope This Standard applies to the food additive β-cyclodextrin that is prepared by enzymatic hydrolysis and purification of starch. 2 Molecular formula and relative molecular mass 2.1 Molecular formula (C6H10O5)7 2.2 Relative molecular mass 1134.987 (according to the international relative atomic mass in 2018) 3 Technical requirements 3.1 Sensory requirements Sensory requirements shall meet the requirements of Table 1. 3.2 Physical and chemical indicators Physical and chemical indicators shall meet the requirements of Table 2. Appendix A  Inspection method A.1 General provisions The reagents and water used in this Standard refer to analytical reagents and grade-3 water in accordance with GB/T 6682, when other requirements are not indicated. The standard solutions used in the test, the standard solutions for impurity determination, the preparations and products, unless otherwise specified, shall be prepared in accordance with GB/T 601, GB/T 602 and GB/T 603. The solution used in the test refers to an aqueous solution, when it is not specified which solvent is used to prepare it. A.2 Identification test A.2.1 Specific rotation test Weigh 1.00 g of the sample and dissolve it in 100 mL of water; measure it according to the method that is specified in GB/T 613. The specific rotation shall be +160° ~ +164°. A.2.2 Chromatographic test In the β-cyclodextrin content determination test, the retention time of the main peak of the sample solution chromatogram shall be consistent with the retention time of the main peak of the standard solution chromatogram. A.3 Determination of β-cyclodextrin content (on a dry basis) A.3.1 Reagents and materials A.3.1.1 Methanol: chromatographically pure. A.3.1.2 Water: Grade-1 water specified in GB/T 6682. A.3.1.3 β-cyclodextrin standard substance: purity ≥99.5%. A.3.2 Instruments and equipment High performance liquid chromatograph: equipped with a refractive index detector. A.3.3 Reference chromatographic conditions A.3.3.1 Chromatographic column: 10 μm porous silica gel chromatographic column (Φ4.6 mm × 25 cm) with octadecylsilane-bonded silica gel as the filler, or other equivalent chromatographic column. A.3.3.2 Mobile phase: water: methanol = 85: 15. A.3.3.3 Column temperature: 30 °C. A.3.3.4 Detector temperature: 35 °C. A.3.3.5 Flow rate: 1.5 mL/min. A.3.3.6 Injection volume: 10 μL. A.3.4 Analysis steps A.3.4.1 Preparation of standard solution Weigh 0.05 g of β-cyclodextrin standard substance, accurate to 0.000 1 g; place it in a 10 mL volumetric flask; use the mobile phase to dissolve it and dilute to the mark; mix well. Use a 0.45 μm microporous membrane for filtration before chromatographic analysis. A.3.4.2 Preparation of sample solution Weigh 0.05 g of the sample, accurate to 0.000 1 g; place it in a 10 mL volumetric flask; use the mobile phase to dissolve it and dilute to the mark; mix well. Use a 0.45 μm microporous membrane for filtration before chromatographic analysis. A.3.5 Determination Under the reference chromatographic conditions of A.3.3, respectively determine the standard solution and sample solution. The system suitability means that, for 5 repeated injections of the standard solution, the relative standard deviation of the response area obtained is less than 2.0%. A.3.6 Result calculation The mass fraction w1 of the β-cyclodextrin content (on a dry basis) is calculated according to Formula (A.1). Where: Au – the peak area value of β-cyclodextrin in the sample solution; ......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.