GB 13042-2008 PDF English
US$150.00 · In stock · Download in 9 secondsGB 13042-2008: Packaging containers -- Tinplate aerosol can Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB 13042: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 13042-2008 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Packaging containers -- Tinplate aerosol can
| Valid |
| GB 13042-1998 | English | 359 |
Add to Cart
|
3 days
|
Packaging containers--Aerosol cans
| Obsolete |
| GB 13042-1991 | English | RFQ |
ASK
|
3 days
|
Packing containers--Aerosol cans
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 13042-2008
Basic data | Standard ID | GB 13042-2008 (GB13042-2008) | | Description (Translated English) | Packaging containers -- Tinplate aerosol can | | Sector / Industry | National Standard | | Classification of Chinese Standard | A82 | | Classification of International Standard | 55.140 | | Word Count Estimation | 9,991 | | Date of Issue | 2008-07-30 | | Date of Implementation | 2009-03-01 | | Older Standard (superseded by this standard) | GB 13042-1998 | | Quoted Standard | GB/T 1720; GB/T 2520; GB/T 2828.1; GB/T 6739; QB/T 1877; QB/T 2763 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 14 of 2008 (total 127) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Chinese standard specifies the iron aerosol cans (hereinafter referred to as"aerosol cans") terminology, classification, materials, requirements, test methods, inspection rules, marking, packaging, transportation and storage, this standard applies to a diameter of 25. 4mm, capacity not greater than 1000mL, tinned (chrome) sheet steel aerosol cans, | GB 13042-2008: Packaging containers -- Tinplate aerosol can---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB13042-2008
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 55.140
A 82
GB/T 13042-2008
Replacing GB/T 13042-1998
Packaging containers - Tinplate aerosol can
Issued on. JULY 30, 2008
Implemented on. MARCH 01, 2009
Issued by.
General Administration of Quality Supervision, Inspection
and Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
China.
GB/T 13042-2008
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Terms and definitions... 4
4 Product classification and specification... 5
5 Materials... 6
6 Requirements... 6
7 Test methods... 8
8 Inspection rules... 9
9 Marking, packaging, transportation and storage... 10
GB/T 13042-2008
Foreword
Article 6.4 in this Standard is mandatory; the rest are recommended.
This Standard replaces GB 13042-1998 “Packaging Containers – Aerosol Can”.
Compared with GB 13042-1998 “Packaging Containers – Aerosol Can”, the main
differences of this Standard are as follows.
— Specify that the volume of aerosol can shall not be greater than 1000 mL;
— Delete the classification method by materials (Z and Y); and change the classification
methods to be by structure, shape and pressure resistance properties;
— Printing quality shall conform to QB/T 1877;
— Delete the requirements on the average contact height of can mouth;
— Delete the requirements on heat resistance test;
— The requirements on the deformation pressure and bursting pressure are divided
into two grades. one for normal can and the other for high pressure can;
— Add compatibility requirements;
— Add sanitary requirements.
This Standard adopts the relevant provisions of ISO 90-3.2000(E) “Light gauge metal
containers - Definitions and determination of dimensions and capacities - Part 3.Aerosol
cans”.
This Standard was proposed by China Packaging Federation.
This Standard shall be under the jurisdiction of China National Technical Committee for
Packaging Standardization.
Drafting organizations of this Standard. Zhongshan Kaida Fine Chemical Engineering Co.,
Ltd., National Packaging Product Quality Supervision And Inspection Center (Guangzhou),
Hangzhou COFCO-MC Packaging Co., Ltd., Guangdong Laya Chemical Co., Ltd., Hebei
Jiamei Iron-Printing and Can-making Co., Ltd. AND China Packaging Federation.
Main drafters of this Standard. Luming, Cui Ruping, Feng Hui, Zhu Liping, Zhan Yan, Fan
Zhilong and Ruan Shen.
The previous versions replaced by this Standard are as follows.
— GB 13042-1991, GB 13042-1998.
GB/T 13042-2008
Packaging Containers – Tinplate Aerosol Can
1 Scope
This Standard specifies the terms, definitions, classification, materials, requirements, test
methods, inspection rules, marking, packaging, transportation and storage of tinplate
aerosol can (hereinafter referred as “aerosol can”).
This Standard is applicable to the aerosol can made of thin tinplate steel sheet with the
mouth diameter of 25.4 mm and the volume no less than 1000 ml.
2 Normative references
The articles contained in the following documents have become part of this document when
they are quoted herein. For the dated documents so quoted, all subsequent modifications
(including all corrections) or revisions made thereafter do not apply to this Standard.
However, the parties who reach an agreement according to this Standard are encouraged
to study whether the latest versions of these documents may be used. For the undated
documents so quoted, the latest versions (including all modification sheets) apply to this
document.
GB/T 1720 Method of test for adhesion of paint films
GB/T 2520 Cold-reduced electrolytic tinplate (GB/T 2520-2000, eqv ISO 11949.1995)
GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1.Sampling
schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (GB/T
2828.1-2003, ISO 2859-1.1999, IDT)
GB/T 6739 Paints and varnishes - Determination of film hardness by pencil test (GB/T
6739-2006, ISO 15184.1998, IDT)
3 Terms and definitions
The following terms and definitions apply to this Standard.
3.1
aerosol can
Disposable metal container that is used to contain aerosol products. Aerosol products will
be released in the controlled form through valve under pre-pressing function during use.
3.2
tinplate aerosol can
Aerosol can that is made of thin tinplate (chrome plate) steel sheet.
3.3
GB/T 13042-2008
three-piece can
Aerosol can that is composed of can body, top cover and bottom cover.
3.4
two-piece can
Aerosol can that is composed of can body and top cover (or bottom cover).
3.5
straight-body can
Aerosol can that is composed of can body whose top part and bottom part have invariable
diameter.
4 Product classification and specification
4.1 Classification
4.1.1 According to structure, aerosol can is classified into three-piece can and two-piece
can as shown in Figure1.
4.1.2 According to shape, aerosol can is classified into straight body can and necked-in
can as shown in Figure 2 and 3.
4.1.3 According to pressure resistance properties, aerosol can is classified into normal can
and high pressure can.
4.2 Specification
The specification of diameter of aerosol can is shown in Table 1.
5 Materials
5.1 The properties of thin tinplate steel sheet shall conform to the relevant provisions in
GB/T 2520.
5.2 The adhesive force and impact resistance of thin tinplate (or chrome plate) steel sheet
shall conform to the relevant provisions in QB/T 2763.
6 Requirements
6.1 Appearance quality
6.1.1 The printing quality shall conform to the relevant provisions of QB/T 1877.
6.1.2 The neck-in part of two-piece can shall be free of cracks, obvious wrinkles, pits or
GB/T 13042-2008
6.1.3 The can body shall be flat without rust. The inner coating of can shall be coated
uniformly without bulge or impurities.
6.2 Dimension and deviation
The dimension and deviation of aerosol can shall conform to the provisions in Table 2.
6.3 Supplemental coating and coating-layer quality
6.3.1 Integrity of supplemental coating of welding-seam. aerosol can with supplemental
coating on welding-seam shall be free of linear corrosion or dense corrosion pits after test.
6.5 Compatibility
User shall, according to the contents of the product, conduct test to verify the compatibility
of contained product and aerosol can.
7 Test methods
7.1 Appearance
Visual inspection shall be conducted at the place where is 0.6m from the object under
natural light or 40W lamp-light.
7.2 Measurement of dimension
7.2.1 The inner diameter and outer diameter of can mouth AND the height of can shall be
measured by the particular go / no-go gauge or Vernier caliper.
7.3 Integrity test of supplemental coating of welding-seam
Submerge the supplemental coating of welding-seam in the 20% copper sulfate solution
(CuSO4 • 5H2O).
7.4 Adhesive force test of outer-inner coating-layers
It shall be conducted in accordance with relevant provisions in GB/T 1720.
7.5 Hardness test of outer coating
It shall be conducted in accordance with the relevant provisions in GB/T 6739.
7.6 Air tightness test
7.7 Determination of deformation pressure and bursting pressure
7.7.1 Instrument
Aerosol can bursting pressure tester. pressure range. 0 MPa ~ 4.0 MPa.
8 Inspection rules
8.1 The products delivered at one-time are deemed as a batch; one aerosol can is a unit product.
8.2 The product inspection includes exit-factory inspection and type inspection. Exit-factory
inspection must be conducted before the products are delivered out of factory.
8.3 In case of one of the following situations, type inspection shall be conducted.
8.4 Sampling scheme
For 6.1 and 6.2 in this Standard, double sampling scheme for normal inspection as
specified in GB/T 2828.1 shall be adopted. For 6.3 and 6.4, single sampling scheme for
normal inspection shall be adopted.
8.5 Judging rules and defect classification are shown in Table 4.
8.6 Judge number-group
9 Marking, packaging, transportation and storage
9.1 Marking
The products delivered out of factory shall be provided with quality certificate and signs
that indicate product name, specification, quantity, production date and producer, etc.
9.3 Transportation
Gently treat the products during transportation. Throwing is prohibited. Products shall be
protected from collision, rain, direct sun light and pollution.
9.4 Storage
Products shall be stored in well-ventilated dry clean place. They shall be prevented from
direct sun light or be not piled heavily during storage.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
|