|
Std ID |
Description (Standard Title) |
|
GB/T 25753.4-2015
|
Vacuum technology -- Roots vacuum pump -- Measurement of performance characteristics -- Part 4: Measurement of noise
|
|
GB/T 32218-2015
|
Vacuum technology -- Test methods for leak rates of vacuum system
|
|
GB/T 32221-2015
|
Vacuum technology -- Vacuum thermal environmental simulation test equipment of spacecraft -- General specification
|
|
GB/T 32292-2015
|
Vacuum technology -- Ferrofluid rotary feedthroughs -- Generic specification
|
|
GB/T 32293-2015
|
Vacuum technology -- Selection of leak test methods for vacuum equipment
|
|
GB/T 28786-2012
|
Vacuum technology -- Methods of bonding strength measurement for vacuum coating film -- Measuring adhesion by tape test
|
|
GB/T 25753.3-2011
|
Vacuum technology -- Roots vacuum pump -- Measurement of performance characteristics -- Part 3: Measurement of overflow valve differential pressure
|
|
GB/T 11164-2011
|
Vacuum coating plant generic specification
|
|
GB/T 16709.1-2010
|
Vacuum technology -- Mounting dimensions of pipeline fittings -- Part 1: Non knife-edge flange type
|
|
GB/T 16709.2-2010
|
Vacuum technology -- Mounting dimensions of pipeline fittings -- Part 2: Knife-edge flange type
|
|
GB/T 25752-2010
|
Differential pressure air leak tester
|
|
GB/T 25753.1-2010
|
Vacuum technology -- Roots vacuum pump -- Measurement of performance characteristics -- Part 1: Measurement of maximum tolerable differential pressure
|
|
GB/T 25753.2-2010
|
Vacuum technology -- Roots vacuum pump -- Measurement of performance characteristics -- Part 2: Measurement of compression ratio of the zero throughput
|
|
GB/T 25754-2010
|
Vacuum technology -- Right-angle valve -- Dimensions and interfaces for pneumatic actuator
|
|
GB/T 25755-2010
|
Vacuum technology -- Sputter-ion pumps -- Measurement of performance characteristics
|
|
GB/T 21271-2007
|
Vacuum technology -- Noise measurement for vacuum pumps
|
|
GB/T 21272-2007
|
Vapour vacuum pumps measurement of performance characteristics -- Measurement of back-streaming rate of pump fluid and the heating time
|
|
GB/T 3163-2007
|
Vacuum technology -- Terminology
|
|
GB/T 3164-2007
|
Vacuum technology -- Graphical symbols
|
|
GB/T 6070-2007
|
Vacuum technology -- Flange dimensions
|
|
GB/T 7774-2007
|
Vacuum technology -- Turbomolecular pumps -- Measurement of performance characteristics
|
|
GB/T 19955.1-2005
|
Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)
|
|
GB/T 19955.2-2005
|
Vapour vacuum pump -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure
|
|
GB/T 19956.1-2005
|
Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)
|
|
GB/T 19956.2-2005
|
Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of ultimate pressure
|
|
GB/T 4982-2003
|
Vacuum technology -- Quick release couplings -- Dimensions -- Part 1: Clamped type
|
|
GB/T 4983-2003
|
Vacuum technology -- Quick release couplings -- Dimensions -- Part 2: Screwed type
|
|
GB/T 6071-2003
|
Ultra-high vacuum flange
|
|
GB/T 18193-2000
|
Vacuum technology. Mass-spectrometer-type leak detector calibration
|
|
GB/T 11164-1999
|
Vacuum coating plant generic specification
|
|
GB/T 16709-1996
|
Vacuum technology--Pipeline fittings--Mounting dimensions
|
|
GB/T 3163-1993
|
Terminology for vacuum technology
|
|
GB/T 3164-1993
|
Vacuum technology. Graphical symbols
|
|
GB/T 11164-1989
|
Vacuum deposition equipments generic specification
|
|
GB/T 7774-1987
|
Methods of measurement of the performance characteristics of turbo-molecular pumps
|
|
GB/T 6071.1-1985
|
Ultra-high vacuum flange--Types
|
|
GB/T 6071.2-1985
|
Ultra-high vacuum flange--Dimensions
|
|
GB/T 6071.3-1985
|
Ultra-high vacuum flange--Copper seal gaskets
|
|
GB/T 6166-1985
|
Methods for testing the performance of high efficiency filter media--Penetration and resistance
|
|
GB/T 45528-2025
|
Nanotechnology - Measurement of pore size and pore size distribution of nanoporous materials - Fluorescence probe method
|
|
GB/T 10895-2025
|
Centrifuge & separator - Measurement and evaluation of mechanical vibration
|
|
GB/T 32373-2025
|
Test methods for reverse osmosis membranes
|
|
GB/T 26114-2024
|
Filter for liquid filtration - General technical specification
|
|
GB/T 30177.2-2024
|
Methods of performance testing for filters - Part 2: Vacuum filter
|
|
GB/T 45010-2024
|
Homogeneous electrodialysis membrane
|
|
GB/T 42525-2023
|
Technical specification for microfiltration membrane sterilizing system
|
|
GB/T 10894-2023
|
Determination method of separation machinery noise
|
|
GB/T 10901-2023
|
Centrifuge - Methods of performance testing
|
|
GB/T 25279-2022
|
Hollow fiber flat-plat membrane module
|
|
GB/T 42269-2022
|
Determination of pore size for membranes - Gas permeation method
|
|
GB/T 42270-2022
|
Test methods of hydrophobic characteristics for porous hydrophobic membrane
|
|
GB/T 38514-2020
|
Test methods for electro-deionization stacks
|
|
GB/T 38908-2020
|
Test methods for chlorine resistance performance of household reverse osmosis and nanofiltration membrane elements
|
|
GB/T 38949-2020
|
Determination of pore size for porous membranes - Standard particle method
|
|
GB/T 37617-2019
|
Test methods for Zeta potential of nanofiltration membrane surface - Streaming potential measurement
|
|
GB/T 36118-2018
|
Filter elements of pleated polytetrafluoroethylene microfiltration membrane for gas sterilizing
|
|
GB/T 36137-2018
|
Integrity test method for hollow fiber ultrafiltration membrane module and microfiltration membrane module
|
|
GB/T 36138-2018
|
Flat-plate microfiltration membrane of polytetrafluoroethylene for sterilizing
|
|
GB/T 7779-2018
|
Centrifuge -- Model designation
|
|
GB/T 7781-2018
|
Separator -- Model designation
|
|
GB/T 36386-2018
|
Specification of hygienic housing for microfiltration membrane elements
|
|
GB/T 36522-2018
|
Electrical controlling system for separation machinery -- General technology requirements
|
|
GB/T 37200-2018
|
Test methods for detecting leaks in reverse osmosis and nanofiltration devices
|
|
GB/T 37206-2018
|
Test method for antibacterial properties of organic separation membrane
|
|
GB/T 37215-2018
|
Hydrophobic hollow fiber membrane for membrane distillation
|
|
GB/T 33898-2017
|
General technical specification for membrane bioreactor
|
|
GB/T 34241-2017
|
Spiral wound composite polyamide reverse osmosis membrane element
|
|
GB/T 34242-2017
|
Test methods for nanofiltration membranes
|
|
GB/T 34243-2017
|
Test method for pervaporation dehydration membranes
|
|
GB/T 34244-2017
|
Technical code for liquid sterilizing-grade filter elements
|
|
GB/T 20100-2016
|
Stainless steel fiber sintering medium
|
|
GB/T 7780-2016
|
Filters -- Model designation
|
|
GB/T 32359-2015
|
Test and evaluation methods of reverse osmosis equipment for seawater desalination
|
|
GB/T 32360-2015
|
Test methods for ultrafiltration membranes
|
|
GB/T 32361-2015
|
Test methods for pore size properties of membrane filters -- Bubble point and mean flow pore test
|
|
GB/T 32373-2015
|
Test methods for reverse osmosis membranes
|
|
GB/T 30176-2013
|
Filter for liquid filtration -- Performance measurement methods
|
|
GB/T 30177.1-2013
|
Methods of performance testing for filters -- Part 1: Press filter
|
|
GB/T 4774-2013
|
Terminology of filtration and separation
|
|
GB/T 28695-2012
|
Standard of strength calculation for centrifugal drum
|
|
GB/T 28696-2012
|
Centrifuge -- Separator drum balance -- Inspection standard
|
|
GB/T 25279-2010
|
Hollow fiber flat-plat membrane module
|
|
GB/T 26114-2010
|
Filter for liquid filtration -- General technical specification
|
|
GB/T 21357-2008
|
Specification for similarity Jet fuel filter/separators
|
|
GB/T 21358-2008
|
Specifications for aviation jet fuel filter/separators
|
|
GB/T 20502-2006
|
Type denomination for membrane modules and devices
|
|
GB/T 10901-2005
|
Methods of performance testing for centrifuge
|
|
GB/T 7779-2005
|
The model designation of centrifuges
|
|
GB/T 7780-2005
|
The model designation of filters
|
|
GB/T 7781-2005
|
The model designation of separators
|
|
GB/T 4774-2004
|
Terminology of separating machine
|
|
GB/T 10894-2004
|
Determination method of noise emitted by separating machine
|
|
GB/T 10895-2004
|
Centrifuge and separator -- Measurement method of mechanical vibration
|
|
GB/T 15186-1994
|
Separator-Types and basic parameters
|
|
GB/T 13755-1992
|
Three-colum centrifuge--Specifications
|
|
GB/T 13756-1992
|
Three-column centrifuge--Types and basic parameters
|
|
GB/T 13218-1991
|
Horizontal-belt filter--Types and basic parameters
|
|
GB/T 13327-1991
|
(Vacuum filter with technical conditions)
|
|
GB/T 10894-1989
|
Determination of sound power level for noise emitted by centrifuger separator and filter--Engineering method
|
|
GB/T 10895-1989
|
Centrifuger and Separator-Measurement method of mechanical vibration
|