|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 46063-2025
|
Continuous fiber reinforced ceramic matrix composite - Test method for hoop tensile properties of tubes at room temperature
|
GB/T 46063-2025
|
|
GB/T 46065-2025
|
Continuous fiber reinforced ceramic matrix composite - Test method for axial tensile properties of tubes at room temperature
|
GB/T 46065-2025
|
|
GB/T 43873-2024
|
Test method for upper and lower limit annealing temperatures of ultra-thin glass
|
GB/T 43873-2024
|
|
GB/T 43881-2024
|
Test method for linear thermal expansion of low-expansion glass - Laser interferometry
|
GB/T 43881-2024
|
|
GB/T 43892-2024
|
Test method for spectral transmittance of quartz glass
|
GB/T 43892-2024
|
|
GB/T 1966-2024
|
Porous ceramics - Determination of apparent porosity and bulk density
|
GB/T 1966-2024
|
|
GB/T 44149-2024
|
Fine ceramics - Measurement of iso-electric point of ceramic powders - zeta potential method
|
GB/T 44149-2024
|
|
GB/T 44304-2024
|
Test method for fracture resistance of fine ceramics at room temperature - Indentation fracture(IF) method
|
GB/T 44304-2024
|
|
GB/T 44335-2024
|
Fine ceramics - Methods of test for coatings - Determination of internal stress in ceramic coatings by application of the Stoney formula
|
GB/T 44335-2024
|
|
GB/T 44536-2024
|
Test method for determining thermal expansion coefficient and residual stress of CVD ceramic coatings
|
GB/T 44536-2024
|
|
GB/T 44537-2024
|
Test method for fracture toughness of fine ceramics at room temperature - Surface crack in flexure(SCF) method
|
GB/T 44537-2024
|
|
GB/T 44540-2024
|
Fine ceramics - Test method for determining elastic modulus and bending strength of ceramic tube and rings - Split ring method
|
GB/T 44540-2024
|
|
GB/T 44541-2024
|
Fine ceramics - Ceramic matrix composites - Notations and symbols
|
GB/T 44541-2024
|
|
GB/T 44547-2024
|
Test method for fracture toughness of fine ceramics - Single-edge V-notch beam(SEVNB) method
|
GB/T 44547-2024
|
|
GB/T 44549-2024
|
Test method for interfacial bond strength of ceramic materials at elevated temperatures
|
GB/T 44549-2024
|
|
GB/T 45013-2024
|
Test method for thermal fatigue of fine ceramics substrate
|
GB/T 45013-2024
|
|
GB/T 44752-2024
|
Test method for bending fatigue of flexible glass
|
GB/T 44752-2024
|
|
GB/T 44753-2024
|
Test method for liquidus temperature of ultra-thin glass
|
GB/T 44753-2024
|
|
GB/T 30020-2023
|
Test method for determining defects of glass - Photo elastic scanning method
|
GB/T 30020-2023
|
|
GB/T 42788-2023
|
Terms of smart glass
|
GB/T 42788-2023
|
|
GB/T 1964-2023
|
Porous ceramics - Test method for compressive strength at room temperature
|
GB/T 1964-2023
|
|
GB/T 1965-2023
|
Porous ceramics - Test method for flexural strength at room temperature
|
GB/T 1965-2023
|
|
GB/T 43296-2023
|
Test method for bending fatigue of fine ceramics at room temperature
|
GB/T 43296-2023
|
|
GB/T 43300-2023
|
Ceramic flat membrane - Test method for pure water flux
|
GB/T 43300-2023
|
|
GB/T 43307-2023
|
Fine ceramic fibers - Determination of tensile properties of filaments at room temperature
|
GB/T 43307-2023
|
|
GB/T 41743-2022
|
Rapid testing and evaluation method of thermal insulation performance and attenuation for vacuum insulating glass - Unsteady state method
|
GB/T 41743-2022
|
|
GB/T 2680-2021
|
Glass in building - Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
|
GB/T 2680-2021
|
|
GB/T 39749-2021
|
Evaluation method and graduation for energy efficiency performance of insulating glass unit
|
GB/T 39749-2021
|
|
GB/T 39809-2021
|
Measuring method of the energy consumption of flat glass furnace
|
GB/T 39809-2021
|
|
GB/T 39814-2021
|
Test method for impact strength of ultrathin glass - Ball drop method
|
GB/T 39814-2021
|
|
GB/T 39815-2021
|
Test method for scratch resistance of ultrathin glass
|
GB/T 39815-2021
|
|
GB/T 39696-2020
|
Determination of flowability of fine ceramic powders. Calibrated funnel
|
GB/T 39696-2020
|
|
GB/T 37780-2019
|
Test method for elastic modulus, shear modulus and Poissons ratio of glass
|
GB/T 37780-2019
|
|
GB/T 37781-2019
|
Test methods for bending strength of glass
|
GB/T 37781-2019
|
|
GB/T 37784-2019
|
In-situ test method for detection of structural risk of the insulating glass
|
GB/T 37784-2019
|
|
GB/T 37788-2019
|
Test method for elastic moduli of ultra-thin glass
|
GB/T 37788-2019
|
|
GB/T 37900-2019
|
Test method of hardness and fracture toughness for ultra-thin glass - Low-load Vickers hardness indentation method
|
GB/T 37900-2019
|
|
GB/T 36142-2018
|
Test methods of color and color difference for architectural glass
|
GB/T 36142-2018
|
|
GB/T 36261-2018
|
On-site test technical condition and calculation for optical and thermal parameters of energy saving glass for building
|
GB/T 36261-2018
|
|
GB/T 34171-2017
|
Test method for flexural property of thin and ultrathin glass -- Three-point bending method
|
GB/T 34171-2017
|
|
GB/T 34185-2017
|
Aluminum silicate glass for aircraft
|
GB/T 34185-2017
|
|
GB/T 34338-2017
|
Test methods for determining mechanical properties of sealing glass for vacuum glazing
|
GB/T 34338-2017
|
|
GB/T 32061-2015
|
Testing method of laminated glass interlayer shear modulus
|
GB/T 32061-2015
|
|
GB/T 31544-2015
|
Test method for elastic properties of glass at high temperatures -- Impulse excitation of vibration
|
GB/T 31544-2015
|
|
GB/T 32056-2015
|
Escape test method for emergency windows of high speed multiple unit
|
GB/T 32056-2015
|
|
GB/T 32057-2015
|
Test method for glass hardness and scratch resistance of high speed multiple unit
|
GB/T 32057-2015
|
|
GB/T 32058-2015
|
Test method of resistance bird impact and projectile impact for high speed multiple unit windshield and coach body exterior protected construction material
|
GB/T 32058-2015
|
|
GB/T 32059-2015
|
Fatigue load test method for windows, doors of high speed multiple unit
|
GB/T 32059-2015
|
|
GB/T 32060-2015
|
Test method for gravelling impact resistance of high speed multiple unit windows
|
GB/T 32060-2015
|
|
GB/T 32062-2015
|
In-situ test method for degradation ratio of vacuum degree of vacuum glazing -- Photo-elastic method
|
GB/T 32062-2015
|
|
GB/T 30983-2014
|
Test method for optical properties of photovoltaic glass
|
GB/T 30983-2014
|
|
GB/T 30020-2013
|
Test method for the defects of glass -- Photo elastic scanning method
|
GB/T 30020-2013
|
|
GB/T 23459-2009
|
Measurement and calculation method of heat balance and thermal efficiency for ceramic industrial kiln
|
GB/T 23459-2009
|
|
GB/T 5137.4-2001
|
Road vehicles -- Safety glazing materials -- Method for the determination of solar transmittance
|
GB/T 5137.4-2001
|
|
GB/T 17339-1998
|
Road vehicles. Safety glazing materials. Test methods for resistant-to-chemicals and resistant-to-temperature changes
|
GB/T 17339-1998
|
|
GB/T 16920-1997
|
Glass. Determination of coefficient of mean linear thermal expansion
|
GB/T 16920-1997
|
|
GB/T 6580-1997
|
Glass. Resistance to attack by a boiling aqueous solution of mixed alkali-Method of test and classification
|
GB/T 6580-1997
|
|
GB/T 6582-1997
|
Glass. Hydrolytic resistance of glass grains at 98 Celsius. Method of test and classification
|
GB/T 6582-1997
|
|
GB/T 5137.1-1996
|
Road vehicles--Safety glazing materials--Test methods for mechanical properties
|
GB/T 5137.1-1996
|
|
GB/T 5137.2-1996
|
Road vehicles--Safety glazing materials--Test methods for optical properties
|
GB/T 5137.2-1996
|
|
GB/T 5137.3-1996
|
Road vehicles--Safety glazing materials--Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
|
GB/T 5137.3-1996
|
|
GB/T 15728-1995
|
Glass. Resistance to attack by a boiling bydrochloric acid. gravimetric method of test and classification
|
GB/T 15728-1995
|
|
GB/T 15764-1995
|
Standard definitions of terms relating to flat glass
|
GB/T 15764-1995
|
|
GB/T 14901-1994
|
Test method for density of glass- Method of the sink-float comparison
|
GB/T 14901-1994
|
|
GB/T 1549-1994
|
Methods of chemical analysis of soda-lime-alumina and borosilicate glass
|
GB/T 1549-1994
|
|
GB/T 2680-1994
|
Determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors
|
GB/T 2680-1994
|
|
GB/T 6580-1986
|
Glass--Resistance to attack by a boiling aqueous solution of mixed alkali--Method of test and classification
|
GB/T 6580-1986
|
|
GB/T 6581-1986
|
Glass--Resistance to attack by hydrochloric acid at 100 centigrade--Flame emission or atomic absorption spectrometric method
|
GB/T 6581-1986
|
|
GB/T 6582-1986
|
Glass--Hydrolytic resistance of glass grains at 98 centigrade--Method of test and classification
|
GB/T 6582-1986
|
|
GB/T 37321-2019
|
Chemical analysis methods of different sulfur forms in gypsum and gypsum products
|
GB/T 37321-2019
|
|
GB/T 36141-2018
|
Methods for phase composition analysis of calcined gypsum
|
GB/T 36141-2018
|
|
GB/T 37127-2018
|
Anchorage adhesive for concrete structure
|
GB/T 37127-2018
|
|
GB/T 5484-2012
|
Methods for chemical analysis of gypsum
|
GB/T 5484-2012
|
|
GB/T 23455-2009
|
Flexible skin plaster for exterior wall
|
GB/T 23455-2009
|
|
GB/T 12954.1-2008
|
Testing methods for construction adhesives -- Part 1: Test methods for ceramic tiles adhesives
|
GB/T 12954.1-2008
|
|
GB/T 5484-2000
|
Methods for chemical analysis of gypsum
|
GB/T 5484-2000
|
|
GB/T 5762-2000
|
Methods for chemical analysis of limestone for building material industry
|
GB/T 5762-2000
|
|
GB/T 12954-1991
|
General testing methods for construction adhesives
|
GB/T 12954-1991
|
|
GB/T 5484-1985
|
Method for chemical analysis of gypsum and anhydrite
|
GB/T 5484-1985
|
|
GB/T 30807-2025
|
Thermal insulating products for building applications - Determination of long-term water absorption by immersion
|
GB/T 30807-2025
|
|
GB/T 32983-2025
|
Thermal insulating products for building applications - Determination of compressive creep
|
GB/T 32983-2025
|
|
GB/T 30805-2024
|
Thermal insulating products for building applications - Determination of short-term water absorption by partial immersion
|
GB/T 30805-2024
|
|
GB/T 45012-2024
|
Thermal insulating products for industrial installations - Determination of the coefficient of linear thermal expansion at sub-ambient temperatures
|
GB/T 45012-2024
|
|
GB/T 16400-2023
|
Aluminosilicate wool and it’s products for thermal insulation
|
GB/T 16400-2023
|
|
GB/T 4132-2023
|
Thermal insulation - Vocabulary
|
GB/T 4132-2023
|
|
GB/T 26540-2022
|
Metal network composite insulation board for wall insulation and finish systems
|
GB/T 26540-2022
|
|
GB/T 41768-2022
|
Thermal insulating materials for building applications - Determination of organic content
|
GB/T 41768-2022
|
|
GB/T 17794-2021
|
Preformed flexible elastomeric foam thermal insulation
|
GB/T 17794-2021
|
|
GB/T 20311-2021
|
Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods
|
GB/T 20311-2021
|
|
GB/T 20473-2021
|
Dry-mixed thermal insulating mortar for buildings
|
GB/T 20473-2021
|
|
GB/T 40414-2021
|
Determination of thickness for floating-floor thermal insulating products
|
GB/T 40414-2021
|
|
GB/T 41077-2021
|
Thermal insulating products for building applications - Limit value of hexabromocyclododecanes
|
GB/T 41077-2021
|
|
GB/T 25997-2020
|
Polyisocyanurate(PIR)products for thermal insulation
|
GB/T 25997-2020
|
|
GB/T 25998-2020
|
Mineral wool decorating and acoustic ceilings
|
GB/T 25998-2020
|
|
GB/T 39548-2020
|
Determination of retention rate on thermal resistance of vacuum insulation panels (VIP) in hygrothermal conditions
|
GB/T 39548-2020
|
|
GB/T 39704-2020
|
Determination of effective thermal conductivity for vacuum insulation panels (VIP)
|
GB/T 39704-2020
|
|
GB/T 37608-2019
|
Vacuum insulation panels (VIP)
|
GB/T 37608-2019
|
|
GB/T 17795-2019
|
Glass wool thermal insulating products for building
|
GB/T 17795-2019
|
|
GB/T 25996-2019
|
Test method for thermal insulations on external stress corrosion cracking of austenitic stainless steel
|
GB/T 25996-2019
|
|
GB/T 25975-2018
|
Rock wool products for external thermal insulation composite systems (ETICS)
|
GB/T 25975-2018
|