|
Std ID |
Description (Standard Title) |
|
GB/T 22804-2008
|
Pulp, paper and board -- Determination of mercury content
|
|
GB/T 22805.1-2008
|
Paper and board -- Determination of grease resistance -- Part 1: Permeability test
|
|
GB/T 22805.2-2008
|
Determination of the degree of lipid -resistant paper and cardboard -- Part 2: Surface Exclusion Act
|
|
GB/T 22811-2008
|
Corrugated fibre board -- Determination of the grammage of the component papers after separation
|
|
GB/T 22837-2008
|
Paper and board -- Determination of surface strength (wax method)
|
|
GB/T 22872-2008
|
Solid fibre board -- Determination of grammage of single layers
|
|
GB/T 22873-2008
|
Corrugated fibre board - Determination of the water resistance of the glue bond (immersion)
|
|
GB/T 22874-2008
|
Single-faced and single-wall corrugated fibre board -- Determination of flat crush resistance
|
|
GB/T 22876-2008
|
Paper, board and corrugated fiberboard -- Description and calibration of compression testing equipment
|
|
GB/T 22877-2008
|
Paper, board and pulps -- Determination of residue (ash) on ignition at 525 Celsius
|
|
GB/T 22878-2008
|
Paper and board -- Estimation of contraries
|
|
GB/T 22879-2008
|
Paper and board -- Determination of CIE whiteness, C/2-degree (indoor illumination conditions)
|
|
GB/T 22880-2008
|
Paper and board -- Determination of CIE whiteness, D65/10-degree (outdoor daylight)
|
|
GB/T 22881-2008
|
Paper and board -- Determination of roughness/smoothness (air leak methods) -- General method
|
|
GB/T 22893-2008
|
Paper and board -- Cut-size office paper -- Measurement of curl in a pack of sheets
|
|
GB/T 22894-2008
|
Paper and board -- Accelerated ageing -- Moist heat treatment at 80 Celsius and 65% relative humidity
|
|
GB/T 22895-2008
|
Paper and board -- Determination of the static and kinetic coefficients of friction -- Horizontal plane method
|
|
GB/T 22896-2008
|
Paper and board -- Determination of curl -- Single vertically suspended test piece
|
|
GB/T 22897-2008
|
Paper and board -- Determination of resistance to water penetration
|
|
GB/T 22898-2008
|
Paper and board -- Determination of tensile properties -- Constant rate of elongation method (100mm/min)
|
|
GB/T 22899.1-2008
|
Paper and board -- Measurement of hygro-expansivity -- Part 1: Hygro-expansivity up to a maximum relative humidity of 68%
|
|
GB/T 22899.2-2008
|
Paper and board -- Measurement of hygro-expansivity -- Part 2: Hygro-expansivity up to a maximum relative humidity of 86%
|
|
GB/T 22901-2008
|
Paper and board -- Determination of air permeance (medium range) -- General method
|
|
GB/T 22902-2008
|
Pulps -- Determination of acetone-soluble matter
|
|
GB/T 22903-2008
|
Pulps -- Standard water for physical testing
|
|
GB/T 22904-2008
|
Pulp, paper and board -- Determination of total chlorine and organically bound chlorine
|
|
GB/T 22906.1-2008
|
Testing of cores -- Part 1: Sampling
|
|
GB/T 22906.2-2008
|
Testing of cores -- Part 2: Conditioning of test samples
|
|
GB/T 22906.3-2008
|
Testing of cores -- Part 3: Determination of moisture content using the oven drying method
|
|
GB/T 22906.4-2008
|
Testing of cores -- Part 4: Measurement of dimension
|
|
GB/T 22906.5-2008
|
Testing of cores -- Part 5: Determination of characteristics of concentric rotation
|
|
GB/T 22906.6-2008
|
Test of cores -- Part 6: Determination of bending strength by three-point method
|
|
GB/T 22906.8-2008
|
Testing of cores -- Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
|
|
GB/T 22906.9-2008
|
Testing of cores -- Part 9: Determination of flat crush resistance
|
|
GB/T 22921-2008
|
Paper and board -- Determination of water vapour transmission rate of sheet materials -- Dynamic sweep and static gas methods
|
|
GB/T 22922-2008
|
Analytical method for food additive pentaerythritol ester of wood rosin for import and export
|
|
GB/T 23144-2008
|
Paper and board -- Determination of bending stiffness by static methods -- General principle
|
|
GB/T 23175-2008
|
Pulp -- Determination of fiber length (raster method)
|
|
GB/T 10337-2008
|
Raw material and pulp -- Determination of acid soluble lignin
|
|
GB/T 10338-2008
|
Pulps -- Determination of carboxyl content
|
|
GB/T 10340-2008
|
Paper and board -- Determination of filtering rate
|
|
GB/T 2679.11-2008
|
Paper and board -- Qualitative analysis of mineral filler and mineral coating -- SEM/EDAX Method
|
|
GB/T 450-2008
|
Paper and board -- Sampling for testing and identification of machine and cross direction, wire side and felt side
|
|
GB/T 457-2008
|
Paper and board -- Determination of folding endurance
|
|
GB/T 460-2008
|
Paper -- Determination of the sizing value
|
|
GB/T 462-2008
|
Paper, board and pulp -- Determination of moisture content of analytical sample
|
|
GB/T 465.1-2008
|
Paper and board -- Determination of bursting strength after immersion in water
|
|
GB/T 465.2-2008
|
Paper and board -- Determination of tensile strength after immersion in water
|
|
GB/T 10741-2008
|
Pulps -- Determination of alcohol-benzene soluble
|
|
GB/T 10742-2008
|
Raw fiber material - Determination of pectin content
|
|
GB/T 742-2008
|
Fibrous raw material, Pulp, Paper and board -- Determination of ash
|
|
GB/T 8943.1-2008
|
Paper, board and pulp -- Determination of copper content
|
|
GB/T 8943.2-2008
|
Paper, board and pulp -- Determination of iron
|
|
GB/T 8943.3-2008
|
Paper, board and pulp -- Determination of manganese
|
|
GB/T 8943.4-2008
|
Paper, board and pulp -- Determination of calcium and magnesium
|
|
GB/T 8944.1-2008
|
Pulps -- Determination of saleable mass in lots -- Part 1: Pulp baled in sheet form or pulps (such as flash-dried pulps) baled in slabs
|
|
GB/T 8944.2-2008
|
Pulps -- Determination of saleable mass in lots -- Part 2: Unitized bales
|
|
GB/T 1539-2007
|
Paperboard -- Determination of bursting strength
|
|
GB/T 1541-2007
|
Paper and board -- Determination of dirt
|
|
GB/T 21245-2007
|
Paper and board -- Determination of color (C/2-degreediffuse reflectance method)
|
|
GB/T 10339-2007
|
Testing method of light scattering and absorption coefficient for paper, board and pulps
|
|
GB/T 4687-2007
|
Paper, board, pulps and related terms -- Vocabulary
|
|
GB/T 7977-2007
|
Paper, board and pulps -- Determination of conductivity of aqueous extracts
|
|
GB/T 8941-2007
|
Paper and board -- Measurement of specular gloss (20 Degree, 45 Degree, 75 Degree)
|
|
GB/T 20216-2006
|
Determination of effective residual ink
|
|
GB/T 7979-2005
|
Pulps -- Determination of dichloromethane soluble matter
|
|
GB/T 12032-2005
|
Paper and board -- Preparation of an offset print for test gloss
|
|
GB/T 1543-2005
|
Paper and board -- Determination of opacity (paper backing) -- Diffuse reflectance method
|
|
GB/T 2679.7-2005
|
Board -- Determination of puncture resistance
|
|
GB/T 461.3-2005
|
Paper and board -- Determination of water absorption (immersion in water)
|
|
GB/T 7975-2005
|
Paper and board -- Determination of color (diffuse reflectance method)
|
|
GB/T 7978-2005
|
Pulps -- Determination of acid-insoluble ash
|
|
GB/T 1546-2004
|
Pulps -- Determination of Kappa number
|
|
GB/T 1547-2004
|
Pulps -- Determination of permanganate number
|
|
GB/T 1548-2004
|
Pulps -- Determination of viscosity
|
|
GB/T 3332-2004
|
Pulps -- Determination of beating degree (Schopper-Riegler method)
|
|
GB/T 5399-2004
|
Pulps -- Determination of stock concentration
|
|
GB/T 5401-2004
|
Pulps -- Determination of alkali solubility
|
|
GB/T 744-2004
|
Pulps -- Determination of alkali resistance
|
|
GB/T 1545.1-2003
|
Paper, board and pulp -- Determination of acidity or alkalinity
|
|
GB/T 1545.2-2003
|
Paper, board and pulp -- Determination of pH of aqueous extracts
|
|
GB/T 462-2003
|
Paper and board -- Determination of moisture content
|
|
GB/T 5402-2003
|
Paper and board -- Determination of air permeance (medium range) -- Gurley method
|
|
GB/T 7973-2003
|
Paper, board and pulps -- Measurement of diffuse reflectance factor (Diff/Geometry)
|
|
GB/T 1540-2002
|
Paper and board -- Determination of water absorption -- Cobb method
|
|
GB/T 18829.6-2002
|
Determination of fiber coarseness
|
|
GB/T 10336-2002
|
Pulps -- Determination of fiber length by automated optical analysis -- Polarized light method
|
|
GB/T 10342-2002
|
Paper -- Package and mark
|
|
GB/T 457-2002
|
Paper determination of folding endurance (Schopper method)
|
|
GB/T 458-2002
|
Paper and board determination of air permeance (Schopper method)
|
|
GB/T 459-2002
|
Paper and board -- Determination of dimensional instability
|
|
GB/T 460-2002
|
Paper -- Determination of the sizing value (Ink line method)
|
|
GB/T 461.1-2002
|
Paper and board -- Determination of capillary rise (Klemm method)
|
|
GB/T 461.2-2002
|
Paper and board determination of the rate of surface absorbing [including MODIFICATION 1]
|
|
GB/T 4688-2002
|
Paper, board and pulps -- Analysis of fiber furnish
|
|
GB/T 10739-2002
|
Paper, board and pulps -- Standard atmosphere for conditioning and testing
|
|
GB/T 10740-2002
|
Pulp -- Estimation of dirt and shives
|
|
GB/T 5032-2002
|
Paper, board and pulps -- Units for expressing properties
|
|
GB/T 5405-2002
|
Paper-determination of the sizing value (Liquid permeance method)
|
|
GB/T 5406-2002
|
Testing method of oil permeance for paper
|