|
US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22903-2008: Pulps -- Standard water for physical testing
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 22903-2008 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Pulps -- Standard water for physical testing
| Valid |
GB/T 22903-2008
|
PDF similar to GB/T 22903-2008
Basic data | Standard ID | GB/T 22903-2008 (GB/T22903-2008) | | Description (Translated English) | Pulps -- Standard water for physical testing | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y30 | | Classification of International Standard | 85-010 | | Word Count Estimation | 8,873 | | Date of Issue | 2008-12-30 | | Date of Implementation | 2009-09-01 | | Adopted Standard | ISO 14487-1997, MOD | | Regulation (derived from) | National Standard Approval Announcement 2008 No.25 (Total No.138) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the physical measurement process for the pulp in water using standard technical indicators. This standard applies to all pulp. | GB/T 22903-2008: Pulps -- Standard water for physical testing---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pulps. Standard water for physical testing
ICS 85-010
Y30
National Standards of People's Republic of China
Standard water for physical testing pulp
(ISO 14487.1997, MOD)
Posted 2008-12-30
2009-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This revised standard adopts ISO 14487.1997 "Pulp standard physical testing of water."
This standard and ISO 14487.1997 The main differences are as follows.
--- "Introduction" of the pulp increased physical water electrolyte (salt) and other impurities on the papermaking pulp-like luminance (brightness) side impact
Content plane;
--- The "Performance" Delete;
--- Increased its conductivity meter technical parameters specified;
--- The "storage" to "storage and use," and related content is supplemented with changes;
--- Increased in Appendices A and B.
This standard and ISO 14487.1997 structure comparison are listed in Appendix A.
This standard and ISO 14487.1997 technical differences are listed in Appendix B.
The Standard Appendix A, Appendix B are informative appendices.
The standard proposed by China National Light Industry Council.
This standard by the National Standardization Technical Committee of the paper industry.
This standard was drafted. People's Republic of China Shandong Exit Inspection and Quarantine, China Pulp and Paper Research Institute.
Drafters of this standard. Tak Yuen Long, Huang Jie, Xing force, Liu, Yu Hao, Lvrong Hui, Xu Hui high.
Introduction
Pulp electrolyte (salt) concentration greatly affect drainage performance, pulp physical water electrolyte (salt) and other impurities on the papermaking
Plasmacytoid brightness (whiteness) impact is relatively large. Since the electrolyte and other impurities content and electric conductivity of the size of the close relationship, so by
Defining standard conductivity of the water, and to define the content of other impurities in the pulp electrolyte (salt), and thus minimize the electrolyte (salt) and its
He impurities affect pulp measurement results.
Note 1. Even if the electrolyte (salt) concentration is very low, there will be a great impact on the drainage performance.
Note 2. The pulp usually contains an electrolyte (salt), which causes the pulp suspension to increase the electrolyte (salt) concentration and drainage performance.
Standard water for physical testing pulp
1 Scope
This standard specifies the physical measurement process for the pulp with water standard technical indicators.
This standard applies to all pulp.
2 Terms and definitions
The following terms and definitions apply to this standard.
2.1
After purification, the conductivity at 25 ℃ not more than 0.25mS/m in water.
3 test
3.1 Instrument
3.1.1 commonly used laboratory glassware.
3.1.2 Conductivity Meter. Measuring range 0mS/m ~ 19.9mS/m, measurement accuracy of ± 1%, with temperature compensation.
3.2 Test procedure
Pour in a cleaned sample 100mL 250mL beaker, the water temperature was adjusted to 25 ℃ ± 1 ℃, tested for conductivity.
Preparation 4
By distillation, ion exchange, reverse osmosis or other suitable preparation method of standard water.
5 storage and use
In the process of storage and use, the standard of water pollutants mainly from. containers, pumps, piping, valves and other metal or plastic material may be
Dissolution of soluble components, the role of the absorption of atmospheric carbon dioxide or other impurities, microbial deterioration and the like. Therefore, the standard water contact
Containers, pumps, piping, valves and other materials should be made of an inert material or no soluble components; pipes and containers should be sealed system
EC, can not be mixed with air, and after a thorough cleaning charged water standard; the standard water has been made, you should use. If no period of time
Use, should be drained of water and re-; regular standard water were measured to ensure compliance with this standard.
6 Test report
Determination of the pulp in the test report, the standard water used should be stated comply with the national standards.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22903-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 22903-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 22903-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22903-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|