|
Std ID |
Description (Standard Title) |
|
GB/T 26071-2026
|
Monocrystalline silicon and wafers for solar cells
|
|
GB/T 35305-2026
|
Gallium arsenide monocrystalline and monocrystalline polished wafers for solar cell
|
|
GB/T 47097-2026
|
Polished monocrystalline aluminum nitride wafers
|
|
GB/T 47079-2026
|
Technical specification of the roll induction heating treatment
|
|
GB/T 18258-2026
|
Damping materials - Testing method for damping properties
|
|
GB/T 32073.1-2025
|
Non-destructive testing - Ultrasonic testing method for measuring residual stress - Part 1: Critical refraction longitudinal wave method
|
|
GB/T 32073.2-2025
|
Non-destructive testing - Ultrasonic testing method for measuring residual stress - Part 2: Bulk wave method
|
|
GB/T 46848.1-2025
|
Technical product document - Product design data management requirements - Part 1: General principles
|
|
GB/T 46848.2-2025
|
Technical product document - Product design data management requirements - Part 2: Numbering principles
|
|
GB/T 46848.3-2025
|
Technical product document - Product design data management requirements - Part 3: Basic procedure
|
|
GB/T 46848.4-2025
|
Technical product document - Product design data management requirements - Part 4: Authorization management
|
|
GB/T 46848.5-2025
|
Technical product document - Product design data management requirements - Part 5: Document management
|
|
GB/T 46848.6-2025
|
Technical product document - Product design data management requirements - Part 6: Product structure management
|
|
GB/T 46848.7-2025
|
Technical product document - Product design data management requirements - Part 7: Check and issue
|
|
GB/T 46848.8-2025
|
Technical product document - Product design data management requirements - Part 8: Changing control
|
|
GB/T 46848.9-2025
|
Technical product document - Product design data management requirements - Part 9: Memory and maintenance
|
|
GB/T 46849.1-2025
|
Technical product documentation - Requirements for model based definition - Part 1: General requirement
|
|
GB/T 46849.2-2025
|
Technical product documentation - Requirements for model based definition - Part 2: Three-dimensional annotation
|
|
GB/T 46849.3-2025
|
Technical product documentation - Requirements for model based definition - Part 3: Design data
|
|
GB/T 46849.4-2025
|
Technical product documentation - Requirements for model based definition - Part 4: Process data
|
|
GB/T 46849.5-2025
|
Technical product documentation - Requirements for model based definition - Part 5: Inspection data
|
|
GB/T 46849.6-2025
|
Technical product documentation - Requirements for model based definition - Part 6: Service data
|
|
GB/T 46849.7-2025
|
Technical product documentation - Requirements for model based definition - Part 7: Data organization
|
|
GB/T 46849.8-2025
|
Technical product documentation - Requirements for model based definition - Part 8: Data check
|
|
GB/T 46849.9-2025
|
Technical product documentation - Requirements for model based definition - Part 9: Data publish
|
|
GB/T 46910.1-2025
|
Non-destructive testing - Acoustic vibration testing of resin matrix composite parts - Part 1: Tap testing
|
|
GB/T 46910.2-2025
|
Non-destructive testing - Acoustic vibration testing of resin matrix composite parts - Part 2: Mechanical impendance testing
|
|
GB/T 46978-2026
|
Non-destructive testing - Methods of alternating current field measurement (ACFM) for metal structures
|
|
GB/T 47006-2026
|
Additive manufacturing - Quality grading and testing requirements for laser powder bed fusion metal parts
|
|
GB/T 47008-2026
|
Additive manufacturing - Atlas for industrial endoscopy visual testing of laser powder bed fusion metal parts
|
|
GB/T 47134-2026
|
Facility management - Development of a facility management strategy
|
|
GB/T 19285-2026
|
Inspection of corrosion protection for buried steel pipelines
|
|
GB/T 46977-2026
|
Determination of nitrogen, sulfur and phosphorus in foundry reclaimed sand
|
|
GB/T 13320-2025
|
Metellographic grading atlas and assessing method for steel die forgings
|
|
GB/T 46815-2025
|
Superplastic forming and diffusion bonding of titanium alloy sheets - Technological specifications
|
|
GB/T 46816-2025
|
Aluminium alloy flange forgings - General specifications
|
|
GB/T 30583-2026
|
Specifications for post weld heat treatment of pressure equipment
|
|
GB/T 46976-2026
|
Balancing of rotating tools and tool systems
|
|
GB/T 47121-2026
|
Optical gyroscope angle measuring instruments
|
|
GB/T 40808.2-2025
|
Environmental evaluation of machine tools - Part 2: Methods for measuring energy supplied to machine tools and machine tool components
|
|
GB/T 40808.3-2025
|
Environmental evaluation of machine tools - Part 3: Principles for testing metal-cutting machine tools with respect to energy efficiency
|
|
GB/T 3215-2025
|
Centrifugal pumps for petroleum, petrochemical and natural gas industries
|
|
GB/T 20663-2026
|
Accumulators
|
|
GB/T 27512-2025
|
Risk assessment method for buried pipelines
|
|
GB/T 47120-2026
|
Specification of digital delivery for pressure vessels
|
|
GB/T 151-2026
|
Heat exchangers
|
|
GB/T 47007-2026
|
Energy efficiency test and evaluation regulation for plate heat exchangers
|
|
GB/T 21271-2026
|
Vacuum technology - Noise measurement for vacuum pumps
|
|
GB/T 18874.5-2026
|
Cranes - Information to be provided - Part 5: Bridge and gantry cranes
|
|
GB/T 21458-2026
|
Mobile cranes - Presentation of rated capacity charts
|
|
GB/T 23721-2026
|
Cranes - Training of slingers and signallers
|
|
GB/T 24810.1-2026
|
Cranes - Limiting and indicating devices - Part 1: General
|
|
GB/T 24817.5-2026
|
Cranes - Control layout and characteristics - Part 5: Bridge and gantry cranes
|
|
GB/T 26474-2026
|
Container reach stacker
|
|
GB/T 27997-2026
|
Shipbuilding gantry cranes
|
|
GB/T 5973-2026
|
Lifting appliances - Termination sockets for steel wire ropes
|
|
GB/T 17910-2025
|
Industrial trucks - Inspection and repair of fork arms in service on fork-lift trucks
|
|
GB/T 22417-2025
|
Industrial trucks - Fork arm extensions and telescopic fork arms - Technical characteristics and strength requirements
|
|
GB/T 26950.1-2025
|
Explosion-proof industrial trucks - Part 1: Battery industrial truck
|
|
GB/T 26950.2-2025
|
Explosion-proof industrial trucks - Part 2: Internal combustion industrial truck
|
|
GB/T 38055.2-2025
|
Rough-terrain trucks - Safe use requirements - Part 2: Slewing variable-reach trucks
|
|
GB/T 45162.2-2026
|
Warehouse logistics equipment - Specification for reliability testing - Part 2: Storage equipment
|
|
GB/T 46909-2025
|
Forklift truck attachments - Design rules
|
|
GB/T 5183-2025
|
Fork-lift trucks - Fork arms - Dimensions
|
|
GB/T 47122.1-2026
|
Printed electronics - Inkjet printing equipment - Part 1: Imaging based measurement of jetting speed
|
|
GB/T 47122.2-2026
|
Printed eletronics - Inkjet printing equipment - Part 2: Imaging based measurement of droplet volume
|
|
GB/T 47123.1-2026
|
Printed electronics - Part 1: Roll-to-roll printing equipment - Mechanical dimensions
|
|
GB/T 19054-2025
|
General technical conditions for fuel oil cremator
|
|
GB/T 8190.2-2026
|
Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
|
|
GB/T 1859.1-2026
|
Reciprocating internal combustion engines - Measurement of sound power level using sound pressure - Part 1: Engineering method
|
|
GB/T 1859.2-2026
|
Reciprocating internal combustion engines - Measurement of sound power level using sound pressure - Part 2: Survey method
|
|
GB/T 18300-2025
|
Automatically controlled sodium ion exchangers technical specifications
|
|
GB/T 46814-2025
|
Specification for power station valves
|
|
GB/T 46850-2025
|
Guide on design and selection of furnaces and burners for gas fired boilers
|
|
GB/T 35031.5-2025
|
Customer energy management system - Part 5: Application interface specification
|
|
GB/T 14048.16-2025
|
Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
|
|
GB/T 14048.25-2025
|
Low-voltage switchgear and controlgear - Part 9-2: Active arc-fault mitigation systems - Optical-based internal arc-detection and mitigation devices
|
|
GB/T 22200.1-2025
|
Reliability for low-voltage apparatus - Part 1: General rules
|
|
GB/T 22200.3-2025
|
Reliability for low-voltage apparatus - Part 3: Reliability test method of overload relay
|
|
GB/T 22200.4-2025
|
Reliability of low-voltage apparatus - Part 4: Reliability test method of circuit-breakers for overcurrent protection for household and similar installation
|
|
GB/T 22200.5-2025
|
Reliability of low-voltage apparatus - Part 5: Reliability test method of residual current operated circuit-breaker for household and similar uses
|
|
GB/T 24276-2025
|
A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation
|
|
GB/T 9364.5-2025
|
Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links
|
|
GB/T 22200.6-2025
|
Reliability for low-voltage apparatus - Part 6: Reliability test method of contactor relay
|
|
GB/T 22200.7-2025
|
Reliability for low-voltage apparatus - Part 7: Reliability test method of contactors
|
|
GB/T 22200.2-2025
|
Reliability for low-voltage apparatus - Part 2: Reliability test method of moulded case circuit-breakers
|
|
GB/T 30423-2025
|
High-voltage direct current (HVDC) installations - System tests
|
|
GB/T 42558.5-2026
|
Seismic techniques of electrical equipment in converter station on plateau - Part 5: Directives for equipment maintenance
|
|
GB/T 42558.6-2026
|
Seismic techniques of electrical equipment in converter station on plateau - Part 6: Technical specification for seismic monitoring system
|
|
GB/T 47024.1-2026
|
Special test methods for electrical equipment at high altitudes - Part 1: AC/harmonic combined current
|
|
GB/T 46985.3-2025
|
Safety of power converters for use in photovoltaic power systems - Part 3: Particular requirements for electronic devices in combination with photovoltaic elements
|
|
GB/T 6115.1-2026
|
Series capacitors for power systems - Part 1: General
|
|
GB/T 6115.3-2026
|
Series capacitors for power systems - Part 3: Internal fuses
|
|
GB/T 22390.5-2026
|
Control and protection equipment of high-voltage direct current (HVDC) transmission system - Part 5: DC line fault location device
|
|
GB/T 22390.6-2026
|
Control and protection equipment of high-voltage direct current (HVDC) transmission system - Part 6: Converter station transient fault oscillograph device
|
|
GB/T 31487.1-2025
|
Direct current deicers - Part 1: System design
|
|
GB/T 31487.2-2025
|
Direct current deicers - Part 2: Converters
|
|
GB/T 31487.3-2025
|
Direct current deicers - Part 3: Tests
|
|
GB/T 21426-2026
|
Special environmental condition - Requirements for electric power plant with internal combustion engines on plateau
|
|
GB/T 21427-2025
|
Special environmental condition - Technical requirements and test methods for electric power plant system with internal combustion engines in dry heat-desert
|