|
Std ID |
Description (Standard Title) |
|
GB/T 10609.1-2008
|
Technical drawings -- Title blocks
|
|
GB/T 4656-2008
|
Technical drawings -- Simplified representation of bars and profile sections
|
|
GB/T 5898-2008
|
Hand-held non-electric power tools -- Noise measurement code -- Engineering method (grade 2)
|
|
GB/T 6567.1-2008
|
Technical drawings -- Graphical symbols for piping systems -- Basic principles
|
|
GB/T 6567.2-2008
|
Technical drawings -- Graphical symbols for piping systems -- Piping
|
|
GB/T 6567.3-2008
|
Technical drawings -- Graphical symbols for piping systems -- Piping accessories
|
|
GB/T 6567.4-2008
|
Technical drawings -- Graphical symbols for piping systems -- Valves and control components
|
|
GB/T 6567.5-2008
|
Technical drawings -- Graphical symbols for piping systems -- Axonometric representation of graphical symbols for piping, piping accessories and valves
|
|
GB/T 7704-2008
|
Non-destructive testing -- Practice for residual stress measurement by X-Ray
|
|
GB/T 11259-2008
|
Non-destructive testing -- Practice for fabrication and control of steel reference blocks used in ultrasonic testing
|
|
GB/T 11348.2-2007
|
Mechanical vibration -- Evaluation of machines vibration by measurements on rotating shafts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500/r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
|
|
GB/T 20485.13-2007
|
Methods for the calibration of vibration and shock transducers -- Part 13: Primary shock calibration by laser interferometry
|
|
GB/T 20485.21-2007
|
Methods for the calibration of vibration and shock transducers -- Part 21: Vibration calibration by comparison to a reference transducer
|
|
GB/T 20921-2007
|
Condition monitoring and diagnostics of machines -- Vocabulary
|
|
GB/T 20967-2007
|
Non-destructive testing -- Visual testing -- General principles
|
|
GB/T 20968-2007
|
Non-destructive testing -- Aids to visual inspection -- Selection of low-power magnifiers
|
|
GB/T 6075.2-2007
|
Measurement and evaluation of machines on non- rotating parts of the machine vibration -- Part 2: 50MW above the rated speed 1500r/min, 1800r/min, 3000r/min, 3600r/min land turbines and generators installed
|
|
GB/T 11349.1-2006
|
Vibration and shock -- Experimental determination of mechanical mobility -- Part 1: Basic definitions and transducers
|
|
GB/T 11349.2-2006
|
Mechanical vibration and shock testing to determine admittance -- Part 2: Using a single point of translational vibration exciter excitation measurements
|
|
GB/T 11349.3-2006
|
Vibration and shock -- Experimental determination of mechanical mobility -- Part 3: Measurement using impact excitation
|
|
GB/T 131-2006
|
Geometrical Product Specifications (GPS) -- Indication of Surface texture in technical Product documentation
|
|
GB/T 16857.2-2006
|
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 2: CMMs used for measuring size
|
|
GB/T 16857.6-2006
|
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 6: Estimation of errors in computing Gaussian associated features
|
|
GB/T 18778.3-2006
|
Geometrical Product Specifications (GPS) -- Surface texture -- Profile method -- Surface having stratified functional properties -- Part 3: Height characterization using the material probability curve
|
|
GB/T 20063.10-2006
|
Graphical symbols for diagrams -- Part 10: Fluid power converters
|
|
GB/T 20063.11-2006
|
Graphical symbols for diagrams -- Part 11: Devices for heat transfer and heat
|
|
GB/T 20063.1-2006
|
Graphical symbols for diagrams -- Part 1: General information and indexes
|
|
GB/T 20063.12-2006
|
Graphical symbols for diagrams -- Part 12: Devices for separating, purification and mixing
|
|
GB/T 20063.2-2006
|
Graphical symbols for diagrams -- Part 2: Symbols having general application
|
|
GB/T 20063.3-2006
|
Graphical symbols for diagrams -- Part 3: Connections and related devices
|
|
GB/T 20063.4-2006
|
Graphical symbols for diagrams -- Part 4: Actuators and related devices
|
|
GB/T 20063.5-2006
|
Graphical symbols for diagrams -- Part 5: Measurement and control devices
|
|
GB/T 20063.6-2006
|
Graphical symbols for diagrams -- Part 6: Measurement and control function
|
|
GB/T 20063.7-2006
|
Graphical symbols for diagrams -- Part 7: Basic mechanical components
|
|
GB/T 20063.8-2006
|
Graphical symbols for diagrams -- Part 8: Valves and dampers
|
|
GB/T 20063.9-2006
|
Graphical symbols for diagrams -- Part 9: Pumps, compressors and fans
|
|
GB/T 20471-2006
|
Condition monitoring and diagnostics of machines -- General guidelines on using performance parameters
|
|
GB/T 20666-2006
|
Unified screw threads -- Tolerances
|
|
GB/T 20667-2006
|
Unified screw threads -- Limits of sizes
|
|
GB/T 20668-2006
|
Unified screw threads -- Basic dimensions
|
|
GB/T 20669-2006
|
Unified screw threads -- Profiles
|
|
GB/T 20670-2006
|
Unified screw threads -- General plan
|
|
GB/T 20737-2006
|
Non-destructive testing -- General terms and definitions
|
|
GB/T 5616-2006
|
Non-destructive testing -- Guidelines for application
|
|
GB/T 19873.1-2005
|
Corrosion of Metals and Alloys -- Corrosion Test for Intergranular Corrosion Susceptibility of Low-Cr Ferritic Stainless Steel
|
|
GB/T 11334-2005
|
Geometrical Product Specifications (GPS) -- Cone tolerance
|
|
GB/T 12360-2005
|
Geometrical Product Specifications (GPS) -- Cone fit
|
|
GB/T 12604.1-2005
|
Non-destructive testing -- Terminology -- Terms used in ultrasonic testing
|
|
GB/T 12604.2-2005
|
Non-destructive testing -- Terminology -- Terms used in radiographic testing
|
|
GB/T 12604.3-2005
|
Non-destructive testing -- Terminology -- Terms used in penetrant testing
|
|
GB/T 12604.4-2005
|
Non-destructive testing -- Terminology -- Terms used in acoustic emission testing
|
|
GB/T 14412-2005
|
Mechanical vibration and shock -- Mechanical mounting of accelerometers
|
|
GB/T 14691.4-2005
|
Technical product documentation -- Lettering -- Part 4: diacritical and particular marks for the Latin alphabet
|
|
GB/T 14691.6-2005
|
Technical product documentation -- Lettering -- Part 6: Cyrillic alphabet
|
|
GB/T 15822.1-2005
|
Non-destructive testing -- Magnetic particle testing -- Part 1: General principles
|
|
GB/T 15822.2-2005
|
Non-destructive testing -- Magnetic particle testing -- Part 2: Detection media
|
|
GB/T 15822.3-2005
|
Non-destructive testing -- Magnetic particle testing -- Part 3: Equipment
|
|
GB/T 17453-2005
|
Technical drawings -- General principles of presentation -- Basic conventions for representing areas on cuts and sections
|
|
GB/T 18851.1-2005
|
Non-destructive testing -- Penetrant testing -- Part 1: General principles
|
|
GB/T 18851.2-2005
|
Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials
|
|
GB/T 18851.4-2005
|
Non-destructive testing -- Penetrant testing -- Part 4: Equipment
|
|
GB/T 18851.5-2005
|
Non-destructive testing -- Penetrant testing -- Part 5: Means of verification
|
|
GB/T 19765-2005
|
Geometrical Product Specifications (GPS) -- Standard reference for geometrical product specification and verification
|
|
GB/T 19799.1-2005
|
Non-destructive testing -- Ultrasonic testing -- Calibration block No.1
|
|
GB/T 19799.2-2005
|
Non-destructive testing - Ultrasonic testing - Calibration block No. 2
|
|
GB/T 19800-2005
|
Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers
|
|
GB/T 19801-2005
|
Non-destructive testing -- Acoustic emission inspection -- Secondary calibration of acoustic emission sensors
|
|
GB/T 19802-2005
|
Non-destructive testing -- Industrial radiographic illuminators -- Minimum requirements
|
|
GB/T 19803-2005
|
Non-destructive testing -- Radiographic image quality indicators -- Principles and identification
|
|
GB/T 19827-2005
|
Technical product documentation -- Protection notices for restricting the use of documents and products
|
|
GB/T 19845-2005
|
Mechanical vibration -- Vibration testing requirements for shipboard equipment and machinery components
|
|
GB/T 19846-2005
|
Mechanical vibration -- Measurement of vibration generated internally in railway tunnels by the passage of trains
|
|
GB/T 19847-2005
|
Mechanical vibration and shock -- Analytical methods of assessing shock resistance of mechanical systems -- Information exchange between suppliers and users of analyses
|
|
GB/T 19874-2005
|
Mechanical vibration -- Susceptibility and sensitivity of machines to unbalance
|
|
GB/T 19875-2005
|
Mechanical vibration and shock -- Vibration of stationary structures -- Specific requirements for quality management in measurement and evaluation of vibration
|
|
GB/T 19937-2005
|
Non-destructive testing -- Penetrant flaw detectors -- General technical requirements
|
|
GB/T 19938-2005
|
Non-destructive testing -- Radiography of welds and viewing conditions for films -- Utilization of recommended patterns of image quality indicators
|
|
GB/T 19943-2005
|
Non-destructive test -- Radiographic examination of metallic materials by X-and gamma-rays -- Basic rules
|
|
GB/T 5097-2005
|
Non-destructive testing -- Penetrant testing and magnetic particle testing -- Viewing conditions
|
|
GB/T 5796.1-2005
|
Trapezoidal screw threads -- Part 1: Profiles
|
|
GB/T 5796.2-2005
|
Trapezoidal screw threads -- Part 2: General plan
|
|
GB/T 5796.3-2005
|
Trapezoidal screw threads -- Part 3: Basic dimensions
|
|
GB/T 5796.4-2005
|
Trapezoidal screw threads -- Part 4: Tolerances
|
|
GB/T 7031-2005
|
Mechanical vibration -- Road surface profiles -- Reporting of measured data
|
|
GB/T 9445-2005
|
Non-destructive testing -- Qualification and certification of personnel
|
|
GB/T 11336-2004
|
Measurement of departures from straightness
|
|
GB/T 11337-2004
|
Measurement of departures from flatness
|
|
GB/T 16857.5-2004
|
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 5: CMMs using multiple-stylus probing systems
|
|
GB/T 18779.2-2004
|
Geometrical Product Specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
|
|
GB/T 19067.2-2004
|
Geometrical product Specifications (GPS) -- Surface texture -- Profile method Measurement standards -- Part 2: Software measurement standards
|
|
GB/T 1958-2004
|
[Replaced by GB/T 1958-2017] Geometrical Product Specifications (GPS) -- Geometrical tolerance -- Verification prescription
|
|
GB/T 19600-2004
|
Geometrical Product Specifications (GPS) Surface texture -- Profile method -- Calibration of contact (stylus) instruments
|
|
GB/T 4380-2004
|
Assessment of departure from roundness -- Two-and three-point methods
|
|
GB/T 5371-2004
|
Limits and fits -- The calculation and selection of interference fits
|
|
GB/T 5847-2004
|
Dimensional chain -- Methods of calculation
|
|
GB/T 7220-2004
|
Geometrical Product Specifications (GPS) -- Surface texture -- Profile method -- Surface roughness -- Terminology -- Measurement of surface roughness Parameters
|
|
GB/T 7234-2004
|
Geometrical Product Specifications (GPS) -- Measurement of roundness -- Terms, definitions and parameters of roundness
|
|
GB/T 7235-2004
|
Geometrical Product Specifications (GPS) -- Methods for the assessment of departure from roundness -- Measurement of variations in radius
|
|
GB/T 196-2003
|
General purpose metric screw threads -- Basic dimensions
|
|
GB/T 11852-2003
|
Tolerances and specification of taper gauges
|