|
US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 18851.5-2014: Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 Celsius
Status: Valid GB/T 18851.5: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 18851.5-2014 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 Celsius
| Valid |
GB/T 18851.5-2014
|
| GB/T 18851.5-2005 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
Non-destructive testing -- Penetrant testing -- Part 5: Means of verification
| Obsolete |
GB/T 18851.5-2005
|
PDF similar to GB/T 18851.5-2014
Basic data | Standard ID | GB/T 18851.5-2014 (GB/T18851.5-2014) | | Description (Translated English) | Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 Celsius | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 19.100 | | Word Count Estimation | 10,169 | | Date of Issue | 5/6/2014 | | Date of Implementation | 12/1/2014 | | Quoted Standard | GB/T 5097; GB/T 12604.3; GB/T 18851.1; GB/T 18851.2-2008; GB/T 18851.3; GB/T 20737 | | Adopted Standard | ISO 3452-5-2008, MOD | | Regulation (derived from) | National Standards Bulletin No. 9 2014 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the identification methods dedicated to high temperatures (above 50��C) testing requirements and the appropriate testing of the product. It applies only to coincide with the product manual temperature range. | GB/T 18851.5-2014: Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 Celsius
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Non-destructive testing Penetrant testing Part 5. Penetrant testing at temperatures higher than 50 Celsius
ICS 19.100
J04
National Standards of People's Republic of China
NDT penetrant testing
Part 5. penetrant testing temperature is above 50 ℃ of
Part 5. Penetranttestingattemperatureshigherthan50 ℃
(ISO 3452-5.2008, MOD)
Issued on. 2014-05-06
2014-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 18851 "NDT penetrant testing" is divided into the following six sections.
--- Part 1. General;
--- Part 2. Testing of penetrant materials;
--- Part 3. Reference test blocks;
--- Part 4. equipment;
--- Part 5. penetrant testing temperature is above 50 ℃ of;
--- Part 6. temperature below 10 ℃ of penetrant testing.
This section GB/T 18851 Part 5.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses redrafted Law Amendment uses ISO 3452-5.2008 "Non-destructive testing - Penetrant testing - Part 5. Temperature above 50 ℃
The penetrant testing. "
This part of ISO 3452-5.2008 and the technical differences for the following reasons.
--- On normative references, this part has been adjusted technical differences, in order to adapt our technical conditions, the adjusted situation
Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows.
● equivalents adoption of international standards GB/T 5097 instead of ISO 3059 (see Chapter 11);
● equivalents adoption of international standards GB/T 12604.3 instead of ISO 12706 (see Chapter 3);
● equivalents adoption of international standards GB/T 18851.1 replaces ISO 3452-1 (see Chapter 4);
● equivalents adoption of international standards GB/T 18851.2 replaces ISO 3452-2 (see paragraphs 7, 8 and 10);
● equivalents adoption of international standards GB/T 18851.3 replaces ISO 3452-3 (see Chapter 9);
● equivalents adoption of international standards GB/T 20737 instead of EN1330-1 and EN1330-2 (see Chapter 3).
This part of the National NDT Standardization Technical Committee (SAC/TC56) and focal points.
This section is drafted. Baosteel Group Shanghai Jinyi Detection Technology Co., Ltd., Shanghai Industrial Group Co., Ltd. - Friends, Granville Chengbang
Of Testing Technology Co., Shanghai Research Institute of Materials, Shanghai Key Laboratory evaluation of the application of engineering materials, Shanghai Meida new testing equipment has
Limited.
The main drafters of this section. Songhua Nan, Luo Yundong at Po Hong, Zhang Yifeng, SHAO Airlines, Jinyu Fei, Wang Bin, Zhao.
Introduction
When the temperature is above 50 ℃, performance penetrant testing materials will be affected. GB/T 18851.1 and GB/T 18851.2 provides
10 ℃ ~ 50 ℃ osmotic material use and testing. This section GB/T 18851 raised above 50 ℃ penetration and detection material
application.
This section describes the operating temperature associated with product penetration testing process, and how the user to confirm product specification Recommended
The process parameters (process method) is applicable.
Penetrant testing products is to ensure that the quality of high-temperature detector specially developed products, but penetration testing product that can be used at room temperature,
In some cases suitable for high temperature testing.
NDT penetrant testing
Part 5. penetrant testing temperature is above 50 ℃ of
1 Scope
This section GB/T 18851 specifies the square dedicated to the identification of high temperature (above 50 ℃) testing requirements and the appropriate product testing
law. It applies only to coincide with the product manual temperature range.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 5097 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (GB/T 5097-2005, ISO 3059.2001,
IDT)
GB/T 12604.3 Terminology for nondestructive testing penetrant testing (GB/T 12604.3-2013, ISO 12706.2009, IDT)
GB/T 18851.1 destructive testing - Penetrant testing - Part 1. General (GB/T 18851.1-2012, ISO 3452-1.2008,
IDT)
GB/T 18851.2-2008 destructive testing - Penetrant testing - Part 2. Testing of penetrant materials (GB/T 18851.2-2008,
ISO 3452-2.2006, IDT)
GB/T 18851.3 destructive testing - Penetrant testing - Part 3. Reference test blocks (GB/T 18851.3-2008, ISO 3452-3.
1998, IDT)
GB/T 20737 Non-destructive testing - General terms and definitions (GB/T 20737-2006, ISO /T S18173.2005, IDT)
3 Terms and Definitions
Terms and definitions GB/T 12604.3 and GB/T 20737 apply to this document defined.
4 hot penetration testing requirements
Permeable material should be through the identification, and contains the type inspection temperatures.
Unless otherwise provided in this section or the product manual, otherwise GB/T 18851.1 of the General always applicable.
Shall comply with the relevant provisions of the product specification.
5 safety warning
Equipment and penetrant testing products to be operated in a safe manner, storage and use, and in accordance with relevant provisions of the product specification.
The same observation conditions required by this part with the 10 ℃ ~ 50 ℃ implementing penetration testing viewing conditions, the same security warning.
In addition to security alerts 10 ℃ ~ 50 ℃ time, it must also pay particular attention to the risk factors of high temperature. Skin burns, flammable and volatile and so
Is a common potential hazards caused by the temperature change. The work area should be well ventilated, and rigorous evaluation of staff exposure levels.
All about health and safety and environmental protection requirements shall comply with relevant international, national and local regulations.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18851.5-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 18851.5-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 18851.5-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18851.5-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 18851.5-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18851.5-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|