|
Std ID |
Description (Standard Title) |
|
GB/T 13823.10-1995
|
Methods for the calibration of vibration and shock pick-ups secondary shock calibration
|
|
GB/T 13823.11-1995
|
Methods for the calibration of vibration and shock pick-ups. Primary vibration calibration by laser interferometry at low frequencies
|
|
GB/T 13823.12-1995
|
Methods for calibration of vibration and shock pick-ups Resonance frequency testing of undamped accelerometers on a steel block
|
|
GB/T 13823.13-1995
|
Methods for calibration of vibration and shock pick-ups. Primary shock calibration by light cutting
|
|
GB/T 13823.14-1995
|
Methods for the calibration of vibration and shock pick-ups Primary calibration by centrifuge
|
|
GB/T 15478-1995
|
Test methods of the performances for pressure transducer/sensor
|
|
GB/T 15652-1995
|
Generic specification for gas sensors of metal-oxide semiconductor
|
|
GB/T 15653-1995
|
Measuring methods for gas sensors of metal-oxide semiconductor
|
|
GB/T 15768-1995
|
General specification for the capacitance type humidity sensor and transducer
|
|
GB/T 4475-1995
|
Terms of sensor
|
|
GB/T 13823.7-1994
|
Methods for the calibration of vibration and shock pick-ups Primary vibration calibration by comparison of phase angles
|
|
GB/T 13823.1-1993
|
Methods for the calibration of vibration and shock pick-ups. Basic concepts
|
|
GB/T 13823.3-1992
|
Methods for the calibration of vibration and shock pick-ups. Comparison (secondary vibration) calibration by sinusoidal excitation
|
|
GB/T 13823.6-1992
|
Methods for the calibration of vibration and shock pick-ups. Testing of base strain sensitivity
|
|
GB/T 13866-1992
|
Shock and vibration measurements. Characteristics to be specified for seismic pick-ups
|
|
GB/T 13189-1991
|
Geanral specification for the indirectly heated thermistors with negative temperature coefficient
|
|
GB/T 10194-1988
|
Varistors for use in electronic equipment--Part 2: Sectional specification for surge suppression varistors
|
|
GB/T 10195-1988
|
Varistors for use in electronic equipment--Part 2: Blank detail specification for surge suppression varistors--Assessment level E
|
|
GB/T 7153-1987
|
Generic specification for the directly heated positive step-function temperature coefficient thermistors
|
|
GB/T 7154-1987
|
Blank detail specification for the directly heated positive step-function temperature coefficient thermistors--Assessment level E
|
|
GB/T 7665-1987
|
General terminology for transducers
|
|
GB/T 6663-1986
|
General specification for the directly heated negative temperature coefficient thermistors
|
|
GB/T 6664-1986
|
Blank detail specification for directly heated negative temperature coefficient thermistors--Assessment level E
|
|
GB/T 42308-2023
|
Potentiometers for use in electronic equipment - Part 6-1: Blank detail specification - Surface mount preset potentiometers - Assessment level EZ
|
|
GB/T 16515-2023
|
Potentiometers for use in electronic equipment - Part 5: Sectional specification - Single-turn rotary low-power wire wound and non-wire wound potentiometers
|
|
GB/T 40562-2021
|
Potentiometers for use in electronic equipment - Part 6: Sectional specification - Surface mount preset potentiometers
|
|
GB/T 17025-1997
|
Potentiometers for use in electronic equipment. Part 4: Sectional specification. Single-turn rotary power potentiometers
|
|
GB/T 17026-1997
|
Potentiometers for use in electronic equipment. Part 4: Blank detail specification. Single-turn rotary power potentiometers. Assessment level E
|
|
GB/T 17027-1997
|
Potentiometers for use in electronic equipment. Part 4: Blank detail specification. Single-turn rotary power potentiometers. Assessment level F
|
|
GB/T 17028-1997
|
Potentiometers for use in electronic equipment. Part 5: Blank detail specification. Single-turn rotary low-power potentiometers. Assessment level E
|
|
GB/T 17029-1997
|
Potentiometers for use in electronic equipment. Part 5: Blank detail specification. Single-turn rotary low-power potentiometers. Assessment level F
|
|
GB/T 16515-1996
|
Potentiometers for use in electronic equipment. Part 5: Sectional specification. Single-turn rotary low-power wirewound and non-wirewound potentiometers
|
|
GB/T 15880-1995
|
Potentiometers for use in electronic equipment. Part 3: Sectional specification. Rotary precision potentiometers
|
|
GB/T 15881-1995
|
Potentiometers for use in electronic equipment. Part 3: Blank detail specification. Rotary precision potentiometers. Assessment level E
|
|
GB/T 15298-1994
|
Potentiometers for use in electronic equipment. Part 1: Generic specification
|
|
GB/T 15299-1994
|
Potentiometers for use in electronic equipment. Part 2: Sectional specification. Lead-screw actuated and rotary preset potentiometers
|
|
GB/T 15300-1994
|
Potentiometers for use in electronic equipment. Part 2: Blank detail specification. Lead-screw actuated and rotary preset potentiometers. Assessment level E
|
|
GB/T 10193-1997
|
Varistors for use in electronic equipment--Part 1: Generic specification
|
|
GB/T 10193-1988
|
Varistors for use in electronic equipment--Part 1: Generic specification
|
|
GB/T 2471-2024
|
Preferred number series for resistors and capacitors
|
|
GB/T 9546.801-2015
|
Fixed resistors for use in electronic equipment -- Part 8-1: Blank detail specification -- Fixed surface mount resistors categorized as level G -- Assessment level EZ
|
|
GB/T 9546.8-2015
|
Fixed resistors for use in electronic equipment -- Part 8: Sectional specification -- Fixed surface mount resistors
|
|
GB/T 5729-2003
|
Fixed resistors for use in electronic equipment -- Part 1: Generic specification
|
|
GB/T 17034-1997
|
Fixed resistors for use in electronic equipment. Part 2: Blank detail specification. Fixed low-power non-wirewound resistors. Assessment level F
|
|
GB/T 17035-1997
|
Fixed resistors for use in electronic equipment. Part 4: Blank detail specification. Fixed power resistors, heat-sink types. Assessment level H
|
|
GB/T 7338-1996
|
Fixed resistors for use in electronic equipment. Part 6: Sectional specification. Fixed resistor networks with individually measurable resistors
|
|
GB/T 15654-1995
|
Fixed film resistor networks for use in electronic equipment. Part 1: Generic specification
|
|
GB/T 15882-1995
|
Fixed film resistor networks for use in electronic equipment. Part 2: Sectional specification for film resistor networks of assessed quality on the basis of the capability approval procedure
|
|
GB/T 15883-1995
|
Fixed film resistor networks for use in electronic equipment. Part 2: Blank detail specification for film resistor networks of assessedquality on the basis of the capability approval procedure. Assessment level E
|
|
GB/T 15884-1995
|
Fixed resistors for use in electronic equipment. Part 5: Blank detail specification. Fixed precision resistors. Assessment level F
|
|
GB/T 15885-1995
|
Fixed resistors for use in electronic equipment. Part 4: Blank detail specification. Fixed power resistors. Assessment level F
|
|
GB/T 9546-1995
|
Fixed resistors for use in electronic equipment. Part 8: Sectional specification: Fixed chip resistors
|
|
GB/T 5729-1994
|
Fixed resistors for use in electronic equipment. Part 1: Generic specification
|
|
GB/T 9547-1994
|
Fixed resistors for use in electronic equipment. Part 8: Blank detail specificatien: Fixed chip resistors. Assessment level E
|
|
GB/T 12777-1991
|
General specification of metallic bellows expansion joints
|
|
GB/T 12276-1990
|
Fixed resistors for use in electronic equipment. Part 7: Sectional specification. Fixed resistor networks in which not all resistors are individually measurable
|
|
GB/T 12277-1990
|
Fixed resistors for use in electronic equipment. Part 7: Blank detail specification. Fixed resistor networks in which not all resistors are individually measurable. Assessment level E
|
|
GB/T 7339-1987
|
Fixed resistors for use in electronic equipment. Part 6: Blank detail specification: Fixed resistor networks with individually measurable resistors, all of equal value and equal dissipation. Assessment level E
|
|
GB/T 7340-1987
|
Fixed resistors for use in electronic equipment. Part 6: Blank detail specification: Fixed resistor networks with individually measurable resistor of either different resistance values or different rated dissi
|
|
GB/T 7016-1986
|
Method of measurement of current noise generated in fixed resistors
|
|
GB/T 7017-1986
|
Method of measurement of non-linearity in resistors
|
|
GB/T 5730-1985
|
Fixed resistors for use in electronic equipment. Part 2: Sectional specification: Fixed low-power non-wire-wound resistors
|
|
GB/T 5731-1985
|
Fixed resistors for use in electronic equipment. Part 2: Blank detail specification: Fixed low-power non-wire-wound resistors. Assessment level E
|
|
GB/T 5732-1985
|
Fixed resistors for use in electronic equipment. Part 4: Sectional specification: Fixed power resistors
|
|
GB/T 5733-1985
|
Fixed resistors for use in electronic equipment. Part 4: Blank detail specification: Fixed power resistors. Assessment level E
|
|
GB/T 5734-1985
|
Fixed resistors for use in electronic equipment. Part 5: Sectional specification: Fixed precision resistors
|
|
GB/T 5735-1985
|
Fixed resistors for use in electronic equipment. Part 5: Blank detail specification: Fixed precision resistors. Assessment level E
|
|
GB/T 14217-1993
|
Method of test for dielectric dissipation factor (tanĪ“) of capacitor paper at power frequence
|
|
GB/T 6346.1-2024
|
Fixed capacitors for use in electronic equipment - Part 1: Generic specification
|
|
GB/T 6346.14-2023
|
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification--Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
|
|
GB/T 6346.24-2021
|
Fixed capacitors for use in electronic equipment - Part 24: Sectional specification. Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
|
|
GB/T 6346.2501-2018
|
Fixed capacitors for use in electronic equipment -- Part 25-1: Blank detail specification -- Surface mount fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte -- Assessment level EZ
|
|
GB/T 6346.25-2018
|
Fixed capacitors for use in electronic equipment -- Part 25: Sectional specification -- Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
|
|
GB/T 6346.26-2018
|
Fixed capacitors for use in electronic equipment -- Part 26: Sectional specification -- Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
|
|
GB/T 6346.2601-2018
|
Fixed capacitors for use in electronic equipment -- Part 26-1: Blank detail specification -- Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte -- Assessment level EZ
|
|
GB/T 6346.1101-2015
|
Fixed capacitors for use in electronic equipment -- Part 11-1: Blank detail specification -- Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors -- Assessment level EZ
|
|
GB/T 6346.11-2015
|
Fixed capacitors for use in electronic equipment -- Part 11: Sectional specification -- Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
|
|
GB/T 6346.1401-2015
|
Fixed capacitors for use in electronic equipment -- Part 14-1: Blank detail specification -- Fixed capacitors for electromagnetic interference suppression and connection to the supply mains -- Assessment level D
|
|
GB/T 6346.14-2015
|
Fixed capacitors for use in electronic equipment -- Part 14: Sectional specification -- Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
|
|
GB/T 6346.301-2015
|
Fixed capacitors for use in electronic equipment -- Part 3-1: Blank detail specification -- Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte -- Assessment level EZ
|
|
GB/T 6346.3-2015
|
Fixed capacitors for use in electronic equipment -- Part 3: Sectional specification -- Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
|
|
GB/T 14579-2013
|
Fixed capacitors for use in electronic equipment -- Part 17: Sectional specification -- Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
|
|
GB/T 14580-2013
|
Fixed capacitors for use in electronic equipment -- Part 17-1: Blank detail specification -- Fixed metallized polypropylene film dielectric a.c. and pulse capacitors -- Assessment level E and EZ
|
|
GB/T 15448-2013
|
Fixed capacitors for use in electronic equipment -- Part 19: Sectional specification -- Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
|
|
GB/T 16467-2013
|
Fixed capacitors for use in electronic equipment -- Part 19-1: Blank detail specification -- Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors -- Assessment level EZ
|
|
GB/T 10188-2013
|
Fixed capacitors for use in electronic equipment -- Part l3: Sectional specification -- Fixed polypropylene film dielectric metal foil d.c. capacitors
|
|
GB/T 10189-2013
|
Fixed capacitors for use in electronic equipment -- Part 13-1: Blank detail specification -- Fixed polypropylene film dielectric metal foil d.c. capacitors -- Assessment level E and EZ
|
|
GB/T 17207-2012
|
Fixed capacitors for use in electronic equipment -- Part 18-1: Blank detail specification -- Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) electrolyte -- Assessment level EZ
|
|
GB/T 10185-2012
|
Fixed capacitors for use in electric equipment -- Part 7: Sectional specification -- Fixed polystyrene film dielectric metal foil d.c. capacitors
|
|
GB/T 10186-2012
|
Fixed capacitors for use in electronic equipment -- Part 7-1: Blank detail specification -- Fixed polystyrene film dielectric metal foil d.c. capacitors -- Assessment level E
|
|
GB/T 10190-2012
|
Fixed capacitors for use in electronic equipment -- Part 16: Sectional specification -- Fixed metallized polypropylene film dielectric d.c. capacitors
|
|
GB/T 5969-2012
|
Fixed capacitors for use in electronic equipment -- Part 9-1: Blank detail specification -- Fixed capacitor of ceramic dielectric, Class 2 -- Assessment level EZ
|
|
GB/T 7333-2012
|
Fixed capacitors for use in electronic equipment -- Part 2-1: Blank detail specification -- Fixed metallized polyethylene-terephthalate film -- Dielectric d.c. capacitors -- Assessment levels E and EZ
|
|
GB/T 10191-2011
|
Fixed capacitors for use in electronic equipment -- Part 16-1: Blank detail specification -- Fixed metallized polypropylene film dielectric d.c. capacitors -- Assessment levels E and EZ
|
|
GB/T 5966-2011
|
Fixed capacitors for use in electronic equipment -- Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
|
|
GB/T 5967-2011
|
Fixed capacitors for use in electronic equipment -- Part 8-1: Blank detail specification: Fixed capacitor of ceramic dielectric, Class 1 -- Assessment level EZ
|
|
GB/T 5968-2011
|
Fixed capacitors for use in electronic equipment -- Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
|
|
GB/T 7332-2011
|
Fixed capacitors for use in electronic equipment -- Part 2: Sectional specification -- Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors
|
|
GB/T 21038-2007
|
Fixed capacitors for use in electronic equipment -- Part 21-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, class 1 -- Assessment level EZ
|
|
GB/T 21040-2007
|
Fixed capacitors for in electronic equipment -- Part 22-1: Blank detail specification: Fixed surface mount multiplayer capacitors of ceramic dielectric, class 2 -- Assessment level EZ
|