|
Std ID |
Description (Standard Title) |
|
GB/T 4937.15-2018
|
Semiconductor devices -- Mechanical and climatic test methods -- Part 15: Resistance to soldering temperature for through-hole mounted devices
|
|
GB/T 4937.17-2018
|
Semiconductor devices -- Mechanical and climatic test methods -- Part 17: Neutron irradiation
|
|
GB/T 4937.18-2018
|
Semiconductor devices -- Mechanical and climatic test methods -- Part 18: Ionizing radiation (total dose)
|
|
GB/T 4937.19-2018
|
Semiconductor devices -- Mechanical and climatic test methods -- Part 19: Die shear strength
|
|
GB/T 4937.201-2018
|
Semiconductor devices -- Mechanical and climatic test methods -- Part 20-1: Handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat
|
|
GB/T 4937.20-2018
|
Semiconductor devices -- Mechanical and climatic test methods -- Part 20: Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat
|
|
GB/T 4937.21-2018
|
Semiconductor devices -- Mechanical and climatic test methods -- Part 21: Solderability
|
|
GB/T 4937.22-2018
|
Semiconductor devices -- Mechanical and climatic test methods -- Part 22: Bond strength
|
|
GB/T 4937.30-2018
|
Semiconductor devices -- Mechanical and climatic test methods -- Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing
|
|
GB/T 5167-2018
|
Sintered metal materials and hard metals -- Determination of electrical resistivity
|
|
GB/T 5169.24-2018
|
Fire hazard testing for electric and electronic products -- Part 24: Guidance for assessing the fire hazard -- Insulating liquids
|
|
GB/T 5169.25-2018
|
Fire hazard testing for electric and electronic products -- Part 25: Smoke obscuration -- General guidance
|
|
GB/T 5169.26-2018
|
Fire hazard testing for electric and electronic products -- Part 26: Smoke obscuration -- Summary and relevance of test methods
|
|
GB/T 5195.17-2018
|
Fluorspar -- Determination of flotation agents -- Gravimetric method
|
|
GB/T 5195.18-2018
|
Fluorspar -- Determination of barium sulfate content -- Gravimetric method
|
|
GB/T 5195.19-2018
|
Fluorspar -- Determination of arsenic content -- Silver diethyldithiocarbamate spectrometric method
|
|
GB/T 5274.1-2018
|
Gas analysis -- Preparation of calibration gas mixtures -- Part 1: Gravimetric method for class Ⅰ mixtures
|
|
GB/T 5489-2018
|
Printed circuit board draw
|
|
GB/T 5677-2018
|
Castings -- Radiographic testing
|
|
GB/T 6060.1-2018
|
Surface roughness comparison specimen -- Part 1: Casting surface
|
|
GB/T 6432-2018
|
Determination of crude protein in feeds -- Kjeldahl method
|
|
GB/T 6437-2018
|
Determination of phosphorus in feeds -- Spectrophotometry
|
|
GB/T 7354-2018
|
High-voltage test techniques -- Partial discharge measurements
|
|
GB/T 7755.1-2018
|
Rubber, vulcanized or thermoplastic -- Determination of permeability to gases -- Part 1: Differential-pressure methods
|
|
GB/T 7920.8-2018
|
Earth-moving machinery -- Scrapers -- Terminology and commercial specifications
|
|
GB/T 821-2018
|
Square set screws with chamfered end
|
|
GB/T 8590-2018
|
Earth-moving machinery -- Dozers -- Terminology and commercial specifications
|
|
GB/T 86-2018
|
Square set screws with short dog point and cone end
|
|
GB/T 9139-2018
|
Earth-moving machinery -- Hydraulic excavators -- Technical specifications
|
|
GB/T 9234-2018
|
Power reciprocating pump
|
|
GB/T 36901-2018
|
Electronic certificate -- Overall technical framework
|
|
GB/T 36902-2018
|
Electronic certificate -- Catalog information specification
|
|
GB/T 36903-2018
|
Electronic certificate -- Metadata specification
|
|
GB/T 36904-2018
|
Electronic certificate -- Identifier specification
|
|
GB/T 36905-2018
|
Electronic certificate -- File technical requirements
|
|
GB/T 36906-2018
|
Electronic certificate -- API specification for share service
|
|
GB/T 10066.6-2018
|
Test methods for electroheating and electromagnetic processing installations -- Part 6: Test methods for the determination of power output of industrial microwave heating installations
|
|
GB/T 10067.415-2018
|
Basic specifications for electroheating installations -- Part 415: Aluminum annealing furnace
|
|
GB/T 10079-2018
|
Single-stage reciprocating refrigerant compressor (unit)
|
|
GB/T 10335.2-2018
|
Coated paper and board -- Light-weight coated paper
|
|
GB/T 10335.3-2018
|
Coated paper and board -- Coated ivory board
|
|
GB/T 10339-2018
|
Paper, board and pulp -- Determination of light scattering and absorption coefficients (Kubelka-Munk method)
|
|
GB/T 1040.1-2018
|
Plastics -- Determination of tensile properties -- Part 1: General principles
|
|
GB/T 10801.2-2018
|
Rigid extruded polystyrene foam board for thermal insulation (XPS)
|
|
GB/T 11023-2018
|
Test method of SF6 gas tightness for high-voltage switchgear
|
|
GB/T 11071-2018
|
Zone-refined germanium ingot
|
|
GB/T 11361-2018
|
Synchronous belt drives -- Trapezoidal toothed pulleys with pitch code MXL, XXL, XL, L, H, XH and XXH
|
|
GB/T 11498-2018
|
Semiconductor devices -- Integrated circuits -- Part 21: Sectional specification for film integrated circuits and hybrid film integrated circuits on the basis of the qualification approval procedures
|
|
GB/T 1190-2018
|
Technical specification of earth-mover tyres
|
|
GB/T 12654-2018
|
Writing paper
|
|
GB/T 12914-2018
|
Paper and board -- Determination of tensile properties -- Constant rate of elongation method (20mm/min)
|
|
GB/T 13062-2018
|
Semiconductor devices -- Integrated circuits -- Part 21-1: Blank detail specification for film integrated circuits and hybrid film integrated circuits on the basis of the qualification approval procedures
|
|
GB/T 13380-2018
|
A.C. electric fans and regulators
|
|
GB/T 13477.12-2018
|
Test method for building sealants -- Part 12: Determination of adhesion/cohesion properties at constant temperature
|
|
GB/T 13477.2-2018
|
Test method for building sealants -- Part 2: Determination of density
|
|
GB/T 14235.1-2018
|
Low temperature pattern wax material for investment casting -- Part 1: Testing methods for physical properties
|
|
GB/T 14235.2-2018
|
Low temperature pattern wax materials for investment casting -- Part 2: Testing methods for usability properties
|
|
GB/T 14629.1-2018
|
Huyang lamb skin
|
|
GB/T 14629.4-2018
|
Goatling skin
|
|
GB/T 14787-2018
|
Yellow weasel shin
|
|
GB/T 14788-2018
|
Raw nyctereutes procyonoides skin
|
|
GB/T 14844-2018
|
Designations of semiconductor materials
|
|
GB/T 14906-2018
|
Classification of internal combustion engine oils viscosity
|
|
GB/T 15135-2018
|
Gas turbines -- Vocabulary
|
|
GB/T 15162-2018
|
Technical regulation for afforestation by aerial sowing
|
|
GB/T 15163-2018
|
Technical regulations for setting apart hills including sand area for tree growing
|
|
GB/T 1546-2018
|
Pulp -- Determination of Kappa number
|
|
GB/T 1550-2018
|
Test methods for conductivity type of extrinsic semiconducting materials
|
|
GB/T 15805.5-2018
|
Protocol of diagnosis for spring viraemia of carp
|
|
GB/T 15818-2018
|
Test method for biodegradability of surfactants
|
|
GB/T 15851.3-2018
|
Information technology -- Security techniques -- Digital signature schemes giving message recovery -- Part 3: Discrete logarithm based mechanisms
|
|
GB/T 16425-2018
|
Determination for minimum explosive concentration of dust clouds
|
|
GB/T 16427-2018
|
Determination for electrical resistivity of dust layers
|
|
GB/T 16430-2018
|
Determination of the minimum ignition temperature of dust layer
|
|
GB/T 16716.1-2018
|
Packaging and the environment -- Part 1: General rules
|
|
GB/T 16716.2-2018
|
Packaging and the environment -- Part 2: Optimization of the packaging system
|
|
GB/T 16716.3-2018
|
Packaging and the environment -- Part 3: Reuse
|
|
GB/T 16716.4-2018
|
Packaging and the environment -- Part 4: Material recycling
|
|
GB/T 16799-2018
|
Furniture leather
|
|
GB/T 16855.1-2018
|
Safety of machinery -- Safety-related parts of control systems -- Part 1: General principles for design
|
|
GB/T 16986-2018
|
Bar code for commodity -- Application identifier
|
|
GB/T 17215.610-2018
|
Electricity metering data exchange -- The DLMS/COSEM suite -- Part 10: Smart metering standardisation framework
|
|
GB/T 17215.631-2018
|
Electricity metering data exchange -- The DLMS/COSEM suite -- Part 31: Use of local area networks on twisted pair with carrier signalling
|
|
GB/T 17215.646-2018
|
Electricity metering data exchange -- The DLMS/COSEM suite -- Part 46: Data link layer using HDLC protocol
|
|
GB/T 17215.653-2018
|
Electricity metering data exchange -- The DLMS/COSEM suite -- Part 53: DLMS/COSEM application layer
|
|
GB/T 17215.661-2018
|
Electricity metering data exchange -- The DLMS/COSEM suite -- Part 61: Object identification system (OBIS)
|
|
GB/T 17215.662-2018
|
Electricity metering data exchange -- The DLMS/COSEM suite -- Part 62: COSEM interface classes
|
|
GB/T 17215.676-2018
|
Electricity metering data exchange -- The DLMS/COSEM suite -- Part 76: The 3-layer, connection-oriented HDLC based communication profile
|
|
GB/T 17215.697-2018
|
Electricity metering data exchange -- The DLMS/COSEM suite -- Part 97: Communication profile for TCP-UDP/IP networks
|
|
GB/T 17248.2-2018
|
Acoustics -- Noise emitted by machinery and equipment -- Determination of emission sound pressure levels at a workstation and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
|
|
GB/T 17248.3-2018
|
Acoustics -- Noise emitted by machinery and equipment -- Determination of emission sound pressure levels at a workstation and at other specified positions applying approximate environmental corrections
|
|
GB/T 17248.5-2018
|
Acoustics -- Noise emitted by machinery and equipment -- Determination of emission sound pressure levels at a workstation and at other specified positions applying accurate environmental corrections
|
|
GB/T 17253-2018
|
Synthetic filament fabrics
|
|
GB/T 17602-2018
|
Commercial hexanes
|
|
GB/T 17759-2018
|
Inspection method for grey fabric surface defects
|
|
GB/T 17931-2018
|
Poly (ethylene terephthalate) (PET) resin for bottles
|
|
GB/T 17944-2018
|
Specifications for the dense gravity measurement
|
|
GB/T 1796.6-2018
|
Tyre valves -- Part 6: Cores
|
|
GB/T 1796.7-2018
|
Tyre valves -- Part 7: Components
|
|
GB/T 18233.5-2018
|
Information technology -- Generic cabling for customer premises -- Part 5: Data centres
|