|
Std ID |
Description (Standard Title) |
|
GB/T 2855.12-1990
|
Holder for sliding guide die sets for press tools--Die holder for center pillar sets (round)
|
|
GB/T 2855.13-1990
|
Holder for sliding guide die sets for press tools--Punch holder for four pillar sets
|
|
GB/T 2855.14-1990
|
Holder for silding guide die sets for press tools--Die holder for four pillar sets
|
|
GB/T 2855.2-1990
|
Holder for sliding guide die sets for press tools--Die holder for diagonal pillar sets
|
|
GB/T 2855.2-2008
|
Holders for sliding guide die sets for stamping dies -- Part 2: Die holders for die sets
|
|
GB/T 2855.3-1981
|
(Die die holder slide guide. B-type mold base diagonal guide post)
|
|
GB/T 2855.5-1990
|
Holder for sliding guide die sets for press tools--Punch holder for back pillar sets
|
|
GB/T 2855.6-1990
|
Holder for ball slide die sets for press tools--Die holder for back pillar sets
|
|
GB/T 2855.7-1990
|
Holder for sliding guide die sets for press tools--Punch holder for back pillar sets (narrow)
|
|
GB/T 2855.8-1990
|
Holder for sliding guide die sets for press tools--Die holder for back pillar sets (narrow)
|
|
GB/T 2855.9-1990
|
Holder for sliding guide die sets for press diess tools--Punch holder for center pillar sets
|
|
GB/T 28550-2012
|
Piping verification requirement during nuclear power plant commissioning
|
|
GB/T 28551-2012
|
Technical guideline of centrifugal pump set commissioning for nuclear power plant
|
|
GB/T 28552-2012
|
Determination of acid number in transformer oils and turbine oils by BTB method
|
|
GB/T 28553-2012
|
Steam turbines -- Steam purity
|
|
GB/T 28554-2012
|
Electrical equipment of industrial machines -- Electromagnetic compatibility for the construction machinery with internal electrical power supply
|
|
GB/T 28555-2012
|
Technical requirements of treatment facilities for waste electrical and electronic products -- Treatment facilities for refrigeration equipment and cathode ray tube (CRT) monitors
|
|
GB/T 28556-2012
|
Flameproof and intrinsically safe controller with frequency converter for coalmine ventilation fan
|
|
GB/T 28557-2012
|
Regulating evaluation of index on energy saving main parameter for electricity enterprise
|
|
GB/T 28558-2012
|
Supercritical and ultra-supercritical generating set parameter series
|
|
GB/T 28559-2012
|
Supercritical and ultra-supercritical turbine -- Blades
|
|
GB/T 2856.1-1990
|
Holder for ball slide die sets for press tools--Punch holder for diagonal pillar sets
|
|
GB/T 2856.1-2008
|
Holders for ball-bearing die sets for stamping dies -- Part 1: Punch holders for die sets
|
|
GB/T 2856.2-1990
|
Holder for ball slide die sets for press tools--Die holder for diagonal pillar sets
|
|
GB/T 2856.2-2008
|
Holders for ball-bearing die sets for stamping dies -- Part 2: Die holders for die sets
|
|
GB/T 2856.3-1990
|
Holder for ball silde die sets for press tools--Punch holder for center pillar sets
|
|
GB/T 2856.4-1990
|
Holder for ball slide die sets for press tools--Die holder for center pillar sets
|
|
GB/T 2856.5-1990
|
Holder for ball slide die sets for press tools--Punch holder for four pillar sets
|
|
GB/T 2856.6-1990
|
Holder for ball slide die sets for press tools--Die holder for four pillar sets
|
|
GB/T 2856.7-1990
|
Holder for ball silde die sets for press tools--Punch holder for back pillar sets
|
|
GB/T 2856.8-1990
|
Holder for ball slide die sets for press tools--Die holder for back pillar sets
|
|
GB/T 28560-2012
|
Electrical installations in ships -- Small vessels
|
|
GB/T 28561-2012
|
Electrical installations in ships -- Special features -- Control and instrumentation
|
|
GB/T 28562-2012
|
Specification for YVF series variable frequency high voltage three-phase induction motors (Frame size 355-630)
|
|
GB/T 28563-2012
|
Electrical testing of thyristor valves for ±800kV ultra high voltage direct current (UHVDC) power transmission
|
|
GB/T 28564-2012
|
Cabinets for electrotechnical and electronic equipment -- Modular design requirements
|
|
GB/T 28565-2012
|
High-voltage alternating-current series capacitor by-pass switches
|
|
GB/T 28566-2012
|
Security specification and its evaluation for generating unit interconnection
|
|
GB/T 28567-2012
|
Specifications for electric wire and cable of special equipment
|
|
GB/T 28568-2012
|
Cabinets for electrotechnical and electronic equipment -- Safety design requirements
|
|
GB/T 10418-2002
|
Steel bonded tungsten carbides -- Determination of transverse rupture strength
|
|
GB/T 28570-2012
|
Technical guide of on-line condition monitoring system for hydraulic turbine and generator units
|
|
GB/T 28571.1-2012
|
The telecom equipment cabinet -- Part 1: General specification
|
|
GB/T 28572-2012
|
Series of large and medium inlet valves of hydraulic turbine
|
|
GB/T 28573-2012
|
Petroleum, petrochemical and natural gas industries steam turbines -- General-purpose applications
|
|
GB/T 28574-2012
|
Petroleum, petrochemical and natural gas industries steam turbines -- Special-purpose applications
|
|
GB/T 28575-2012
|
Specification for YE3 Series (IP55) super-high efficiency three-phase induction motor (Frame size 80~355)
|
|
GB/T 28576-2012
|
Calculation of industrial rack design
|
|
GB/T 28577-2012
|
Classification and basic specification for cold chain logistics
|
|
GB/T 28578-2012
|
Publication logistics -- Specification of interface operation
|
|
GB/T 28579-2012
|
Publication logistics -- Specification of return operation
|
|
GB/T 28580-2012
|
Quality requirements for port logistics service
|
|
GB/T 28581-2012
|
General warehouse and warehouse area design parameter
|
|
GB/T 28582-2012
|
Express waybill
|
|
GB/T 28583-2012
|
Specification of electricity supply service
|
|
GB/T 28584-2012
|
Specifications for the establishment of urban coordinate system
|
|
GB/T 28585-2012
|
Geographic information -- Methodology for feature cataloguing
|
|
GB/T 28587-2012
|
Inertial measurement unit in the mobile mapping system
|
|
GB/T 28588-2012
|
Specifications for the continuously operating reference station using global navigation satellite system
|
|
GB/T 28589-2012
|
Geographic information -- Positioning services
|
|
GB/T 28590-2012
|
Classification and code for urban underground facilities
|
|
GB/T 28591-2012
|
Wind scale
|
|
GB/T 28592-2012
|
Grade of precipitation
|
|
GB/T 28593-2012
|
Warning of sand and dust storm weather
|
|
GB/T 28594-2012
|
Nowcasting
|
|
GB/T 28596-2012
|
Internal carbon coated polyethylene terephthalate (PET) bottle
|
|
GB/T 28599-2012
|
Determination of phthalate esters in cosmetics
|
|
GB/T 28600-2012
|
Rubber compounding ingredients -- Silica, precipitated, hydrated -- Determination of average pore diameter
|
|
GB/T 28601-2012
|
Rubber compounding ingredients -- Silica, precipitated, hydrated -- Determination of gelatin content
|
|
GB/T 28602-2012
|
Production technical regulation for furnace-process phosphoric acid
|
|
GB/T 28603-2012
|
Production technical regulation for Anhydrous hydrogen fluoride
|
|
GB/T 28604-2012
|
Rubber seals used in living-water and drinking-water supply pipes and fittings
|
|
GB/T 28605-2012
|
Rubber and plastics tubing and hoses and hose assemblies for drinking water
|
|
GB/T 28606-2012
|
Determination of perfluorooctanoic acid and salt in the coating -- High performance liquid chromatography-tandem mass spectrometry
|
|
GB/T 28607-2012
|
Determination of compatibility between standard elastomeric materials and automotive engine oil
|
|
GB/T 28608-2012
|
1-Oxa-4-azacyclohexane (Morpholine) for industrial use
|
|
GB/T 28609-2012
|
Optical functional films -- Polyethylene terephthalate (PET) -- Determination of birefringence
|
|
GB/T 2861.10-1990
|
Guide unit for press dies--Cage
|
|
GB/T 2861.10-2008
|
Guide unit for stamping dies -- Part 10: Washers
|
|
GB/T 2861.11-1990
|
Guide unit for press tools--Cylindrical coil compression spring
|
|
GB/T 2861.11-2008
|
Guide unit for stamping dies -- Part 11: Clampers
|
|
GB/T 2861.1-1990
|
Guide unit for press tools--Guide pillars, type A
|
|
GB/T 2861.1-2008
|
Guide unit for stamping dies -- Part 1: Guide pillars for sliding guide
|
|
GB/T 2861.12-1990
|
Guide unit for press tools--Guide pillar with taper lead, type A
|
|
GB/T 2861.13-1990
|
Guide unit for press tools--Guide pillar with taper lead, type B
|
|
GB/T 2861.14-1990
|
Guide unit for press tools--Bushing
|
|
GB/T 2861.15-1990
|
Guide unit for press tools--Washer
|
|
GB/T 2861.16-1990
|
Guide unit for press tools--Clampr
|
|
GB/T 2861.17-1981
|
Guide unit of cold press dies--Mounting dimension of die holder for removable guide pillars
|
|
GB/T 2861.18-1981
|
Guide unit of cold press dies--Guide pillars with ring fixed
|
|
GB/T 2861.19-1981
|
Guide unit of cold press dies--Guide bushing with ring fixed
|
|
GB/T 2861.20-1981
|
Guide unit of cold press dies--Clamping ring
|
|
GB/T 2861.2-1990
|
Guide unit for press tools--Guide pillars, type B
|
|
GB/T 2861.2-2008
|
Guide unit for stamping dies -- Part 2: Guide pillars for ball-bearing
|
|
GB/T 2861.3-1990
|
Guide unit for press tools--Guide pillars, type C
|
|
GB/T 2861.3-2008
|
Guide unit for stamping dies -- Part 3: Guide bushes for sliding guide
|
|
GB/T 2861.4-1981
|
Guide unit of cold press dies--Small guide pillars, type A
|
|
GB/T 2861.4-2008
|
Guide unit for stamping dies -- Part 4: Guide bushes for ball-bearing
|
|
GB/T 2861.5-1981
|
Guide unit of cold press dies--Small guide pillars, type B
|
|
GB/T 2861.5-2008
|
Guide unit for stamping dies -- Part 5: Cages
|