Path: Home > GB/T > Page280 > GB/T 14818-2008

Price & Delivery

US$879.00 · In stock · Download in 9 seconds
GB/T 14818-2008: General specification for DC servomotors with wounded disc armature
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Obsolete

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 14818-2008	English	879	Add to Cart	4 days [Need to translate]	General specification for DC servomotors with wounded disc armature
GB/T 14818-1993	English	719	Add to Cart	5 days [Need to translate]	General specification for DC servomotors with wounded disc armature

GB/T 14818-2008: General specification for DC servomotors with wounded disc armature

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification for DC servomotors with wounded disc armature ICS 29.160.30 K24 National Standards of People's Republic of China Replacing GB/T 14818-1993 Wirewound disc DC servo motor General technical conditions Posted 2008-06-13 2009-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Product Categories 1 4 technical requirements and test methods 3 12 5 Inspection Rules 6 ready to deliver 14 7 customer service 15 Appendix A (normative) wounded disc DC servo motor temperature rise test support structure in the form and size 16 Annex B (informative) Model name 18

Foreword

This standard replaces GB/T 14818-1993 "wounded disc DC servo motors, general technical conditions." The original standard GB/T 14818-1993 compared to the main amendments are as follows. --- Revised standard reference for content and relevant content has been revised; --- Remove the commutation spark, an increase of electromagnetic compatibility, safety and security requirements in more detail; --- On the "Inspection Rules" in the test classification changes. Appendix A of this standard is a normative appendix, Appendix B is an informative annex. The standard proposed by China Electrical Equipment Industrial Association. This standard by the National Standardization Technical Committee micromotor (SAC/TC2) centralized. This standard is mainly drafted by. Xi'an Institute of micro-motor, Hubei state one hundred million micro motor Co., Huazhong University of Science and Technology. The main drafters of this standard. Dong Chaokui, Tan Ying, Zhang Huiming PROCEEDINGS OF. This standard replaces the standards previously issued as follows. --- GB/T 14818-1993. Wirewound disc DC servo motor General technical conditions

1 Scope

This standard specifies the product classifications, technical requirements and test methods, inspection rules Wirewound disc DC servo motor, delivery preparation. This standard applies to wounded disc DC servo motor. This standard should be wound disc DC servo motor (hereinafter referred to as motors) used with the special technical conditions. The specific types of motor skills Indicators and additional surgery or special requirements specified in the special technical conditions.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 755 rotary motor fixed and performance (GB 755-2000, idt IEC 60034-1.1996) GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (GB/T 2828.1-2003, idt ISO 2859-1.1999) GB/T 6113.2 radio disturbance and immunity measuring method (GB/T 6113.2-1998, eqvCISPR16-2.1996) GB/T 7345 motor control basic technical requirements GB/T 7346 motor control basic shape structure type GB/T 10405 control motor type designation GB 17799.3 Electromagnetic compatibility - Generic standards for residential, commercial and light industrial environments Emission standard (GB 17799.3-2001, idtCISPR/IEC 61000-6-3.1996) GB 17799.4 Electromagnetic compatibility - Generic standards Emission standard for industrial environments (GB 17799.4-2001, idt IEC 61000- 6-4.1997) GB 18211-2000 General requirements for safety micro-motor JB/T 8162-1999 motor control packaging technology conditions

3 Product Categories

3.1 Type designation Motor model name should refer to Appendix B (informative) prescribed by special technical conditions. 3.2 Frame Frame sizes and the corresponding frame outer diameter shall comply with GB/T 7346's. 3.3 basic shape and mounting structure Motor basic shape and mounting structure according to FIGS. 1 to 3 and in Table 1. Table 1 Frame size to 130 130 to 200 200 and less than 200 Mounting flange mounting flange spigot spigot spigot installation, screw installation Shaft extension axis extending keyed shaft extension with a key shaft extension Schematic Figure 1 Figure 2 Figure 3 ...