Path: Home > GB/T > Page280 > GB/T 39568-2020

Price & Delivery

US$389.00 · In stock · Download in 9 seconds
GB/T 39568-2020: General requirements for drive micro motors
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

Std ID	Version	USD	Buy	Deliver [PDF] in	Title (Description)
GB/T 39568-2020	English	389	Add to Cart	4 days [Need to translate]	General requirements for drive micro motors

GB/T 39568-2020: General requirements for drive micro motors

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(General technical requirements for driving micromotors) ICS 29:160:30 K24 National Standards of People's Republic of China General technical requirements for driving micromotors 2020-12-14 release 2021-07-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee

Table of contents

Foreword Ⅰ 1 Scope 1 2 Normative references 1 3 Shape, model and operating conditions 1 4 Technical requirements and test methods 3 5 Inspection rules 14 6 Delivery preparation 18 7 Customer Service 18

Foreword

This standard was drafted in accordance with the rules given in GB/T 1:1-2009: This standard was proposed by China Electrical Equipment Industry Association: This standard is under the jurisdiction of the National Micromotor Standardization Technical Committee (SAC/TC2): Drafting organizations of this standard: Xi'an Institute of Micromotors, Xiamen Rituo Electric Technology Co:, Ltd:, Hefei Kaibang Motor Co:, Ltd:, Zhejiang Tai Dawei Motor Co:, Ltd:, Shenzhen Zhengde Intelligent Control Co:, Ltd:, Shenyang University of Technology, Dongguan Ruijing Electrical Technology Co:, Ltd:, Fujian Min Guangdian Motor Manufacturing Co:, Ltd:, Fujian Jinde Quality Inspection Technology Service Co:, Ltd:, Foshan Nanhai Shenghe Electric Co:, Ltd:, Foshan Gaominggao Sheng Aluminum Co:, Ltd:, Rongcheng Hengli Motor Co:, Ltd: The main drafters of this standard: Liu Jie, Ni Lioyong, Li Rong, Qiu Rongquan, Li Hao, Han Xueyan, Lin Jinli, Zhang Bin, Ke Zhihong, Zheng Kang, Wang Jiahua, Zhang Peng: General technical requirements for driving micromotors

1 Scope

This standard specifies the shape, model and operating conditions, technical requirements and test methods, inspection rules, delivery preparation and use of drive micromotors: Household services: This standard applies to the design, manufacture, inspection and acceptance of drive micromotors (hereinafter referred to as "motors"):

2 Normative references

The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article Pieces: For undated references, the latest version (including all amendments) applies to this document: GB/T 755 Rotating motor rating and performance GB/T 1971 Rotating motor wire end marking and direction of rotation GB/T 2423:1-2008 Environmental testing of electric and electronic products Part 2: Test method Test A: Low temperature GB/T 2423:2-2008 Environmental testing of electric and electronic products Part 2: Test method Test B: High temperature GB/T 2423:16-2008 Environmental testing of electric and electronic products Part 2: Test method Test J and guideline: Mould GB/T 2423:17-2008 Environmental testing of electric and electronic products Part 2: Test method Test Ka: Salt spray GB/T 2828:1-2012 Sampling inspection procedure by attributes Part 1: Batch inspection sampling searched by acceptance quality limit (AQL) plan GB/T 4942:1 Degree of protection of the overall structure of rotating electrical machines (IP code) Classification GB/T 6113:203 Specification for radio disturbance and immunity measuring equipment and measurement methods Part 2-3: Radio disturbance and immunity Degree measurement method radiated disturbance measurement GB/T 6113:204 Radio disturbance and immunity measurement equipment and measurement method specification Part 2-4: Radio disturbance and immunity Immunity measurement method GB/T 7345-2008 Basic technical requirements for control motors GB/T 7346 Control motor basic appearance structure type GB/T 10068 The measurement, evaluation and limit of mechanical vibration of motors with a shaft center height of 56mm and above GB/T 10069:1 Rotating electrical machine noise measurement method and limit value Part 1: Rotating electrical machine noise measurement method GB/T 10405 Control motor model naming method GB 17799:3 General Standard for Electromagnetic Compatibility for Emissions in Residential, Commercial and Light Industrial Environments GB 17799:4 EMC general standard for emission in industrial environment GB/T 18211 General safety requirements for micromotors JB/T 8162 Control Motor Packaging Technical Conditions 3 Shape, model and operating conditions 3:1 Basic appearance structure and installation type The basic appearance structure and installation type of the motor should meet the requirements of GB/T 7346: ...