|
Std ID |
Description (Standard Title) |
|
GB/T 11601-2000
|
The rule for inspection and exchange of container of portor or station for in or out
|
|
GB/T 11603-1989
|
Determination for mean diameter of wool fibres by airflow method
|
|
GB/T 11603-2006
|
Determination of the average diameter of the wool fiber flow method
|
|
GB/T 11604-1989
|
Test methods for measuring radio interference from high voltage equipment
|
|
GB/T 11604-2015
|
Testing procedure of radio interference generated by high voltage equipment
|
|
GB/T 11605-1989
|
Methods of humidity measurement
|
|
GB/T 11605-2005
|
Methods of humidity measurement
|
|
GB/T 11606.10-1989
|
The method of environmental test for analytical instruments--Low air pressure test
|
|
GB/T 11606.11-1989
|
The method of environmental test for analytical instruments--Sand and dust content of the air test
|
|
GB/T 11606.1-1989
|
The method of environmental test for analytical instruments--General
|
|
GB/T 11606.12-1989
|
The method of environmental test for analytical instruments--Mould growth test
|
|
GB/T 11606.13-1989
|
The method of environmental test for analytical instruments--Salt mist test
|
|
GB/T 11606.14-1989
|
The method of environmental test for analytical insturments--Cold storage test
|
|
GB/T 11606.15-1989
|
The method of environmental test for analytical instruments--High temperature storage test
|
|
GB/T 11606.16-1989
|
The method of environmental test for analytical instruments--Fall down test
|
|
GB/T 11606.17-1989
|
The method of environmental test for analytical instruments--Pump test
|
|
GB/T 11606.2-1989
|
The method of environmental test for analytical instruments--Line frequency and voltage test
|
|
GB/T 11606.3-1989
|
The method of environmental test for analytical instruments--Cold test
|
|
GB/T 11606.4-1989
|
The method of environmental test for analysical instruments--High temperature test
|
|
GB/T 11606.5-1989
|
The method of environmental test for analytical instruments--Change of temperature test
|
|
GB/T 11606.6-1989
|
The method of environmental test for analytical instruments--Damp heat, steady state
|
|
GB/T 11606.7-1989
|
The method of environmental test for analytical instruments--Damp heat, cyclic
|
|
GB/T 11606.8-1989
|
The method of environmental test for analytical instruments--Vibration test
|
|
GB/T 11606.9-1989
|
The method of environmental test for analytical instruments--Magnetic field test
|
|
GB/T 11606-2007
|
Methods of environmental test for analytical instruments
|
|
GB/T 11609-1989
|
Motor vehicles--Brake linings resistance to water, saline solution, oil and brake fluid--Test procedure
|
|
GB/T 11610-1989
|
Motor vehicles--Brake linings--Internal shear strength of lining material--Test procedure
|
|
GB/T 11611-1989
|
Motor vehicles--Hydraulic braking systems--Pipes, tapped holes, male fittings and hose end fittings
|
|
GB/T 11615-1989
|
Geologic exploration standard of geothermal resources
|
|
GB/T 11615-2010
|
Geologic exploration standard of geothermal resources
|
|
GB/T 11616-1989
|
Synchronous belts--Dimensions
|
|
GB/T 11616-2013
|
Synchronous belt drives -- Belts with pitch codes -- MXL, XXL, XL, L, H, XH and XXH -- Synchronous belt dimensions
|
|
GB/T 11617-1989
|
Lexicographical symbols
|
|
GB/T 11617-2000
|
Lexicographical symbols
|
|
GB/T 11618.1-1989
|
Copper tube joints--Sockets
|
|
GB/T 11618.1-2008
|
Pipe fittings of copper and copper alloys -- Part 1: Fittings of braze welding type
|
|
GB/T 11618.2-1989
|
Copper tube joints--Bends with an angle of 45 degrees
|
|
GB/T 11618.2-2008
|
Pipe fittings of copper and copper alloys -- Part 2: Fittings of press type
|
|
GB/T 11618.3-1989
|
Copper tube joints--Bends with an angle of 90 degrees
|
|
GB/T 11618.4-1989
|
Copper tube joints--Bends with an angle of 180 degrees
|
|
GB/T 11618.5-1989
|
Copper tube joints--Tees
|
|
GB/T 11618.6-1989
|
Copper tube joints--Reducers
|
|
GB/T 11618.7-1989
|
Copper tube joints--Reduced tees
|
|
GB/T 11618.8-1989
|
Copper tube joints--General technical regulations
|
|
GB/T 11618-1999
|
Copper tube joint
|
|
GB/T 116-1986
|
Specifications for rivet
|
|
GB/T 11626-2009
|
Ships and marine technology -- Launching appliances for davit-launched lifeboats
|
|
GB/T 11631-1989
|
Technical specifications of manufecture of pressure hull structure for submersibles and underwater equipments
|
|
GB/T 11632-1989
|
Technical specifications of material of pressure hull structure for submersibles and underwater equipments
|
|
GB/T 11633-1989
|
Marine engine room centrol control console general specification
|
|
GB/T 11633-2000
|
Marine engine room central control console general specification
|
|
GB/T 11634-1989
|
Marine A. C low voltage switchboard general specification
|
|
GB/T 11634-2000
|
Marine A.C low voltage switchboard general specification
|
|
GB/T 11640-1989
|
Seamless aluminium alloy gas cylinder
|
|
GB/T 11640-2001
|
Seamless aluminum alloy gas cylinders
|
|
GB/T 11642-1989
|
Measuring method for exhaust pollutants from light-duty vehicle
|
|
GB/T 11650-1989
|
Hook strip screens for drilling fluid shakers
|
|
GB/T 11651-1989
|
Selection rules of articles for labour protection use
|
|
GB/T 11651-2008
|
Code of practice for selection of personal protective equipment
|
|
GB/T 11653-1989
|
The performance of compact collecting unit and measuring method
|
|
GB/T 11653-2000
|
Spine titles on books and other publications
|
|
GB/T 11668-1989
|
Spine titles on books and other publications
|
|
GB/T 11669-1989
|
Acoustics--Standard reference zero for calibration of pure-tone bone conduction audiometers
|
|
GB/T 11670-1989
|
Acoustics--Characteristics and specifications for laboratory standard condenser microphones
|
|
GB/T 1167-1996
|
The threads for transition fit
|
|
GB/T 11672-1989
|
Method for determination of p-hydroxydenzoic acid esters in foods
|
|
GB/T 11674-1989
|
Hygienic standard of demineralized whey powder
|
|
GB/T 11679-1989
|
Method for analysis of hygienic standard of polytetrafluorethylene coating for inner wall of food container
|
|
GB/T 11681-1989
|
Method for analysis of hygienic standard of stainless steel food containers and table wares
|
|
GB/T 1168-1976
|
Studs--Technical requirements
|
|
GB/T 11682-1989
|
Low background alpha measuring instrument
|
|
GB/T 11682-2008
|
Low background alpha and/or beta measuring instruments
|
|
GB/T 11683-1989
|
High range X, gamma and beta radiation dose and dose rate portable instrument for emergency radiation protection purposes
|
|
GB/T 11684-1989
|
Characterisics and test methods of electromagnetic interferences in nucleonic instrumentations for reactors
|
|
GB/T 11684-2003
|
Electromagnetic environment conditions and testing procedures for nuclear instrumentation
|
|
GB/T 11685-1989
|
Test procedures for semiconductor X-ray energy spectrometers
|
|
GB/T 11685-2003
|
Measurement procedures for semiconductor X-ray detector system and semiconductor X-ray energy spectrometers
|
|
GB/T 11686-2002
|
Small craft -- Toilet waste retention systems
|
|
GB/T 11687-1989
|
Carbon steel bends
|
|
GB/T 11688-1989
|
Marine cast steel flanged stop check valves
|
|
GB/T 11689-1989
|
Marine cast steel flanged stop valves
|
|
GB/T 11690-1989
|
Marine cast steel flanged lift check valves
|
|
GB/T 11691-1989
|
Cast steel suction sea valves
|
|
GB/T 11692-1989
|
Bronze suction sea valves
|
|
GB/T 11693-1989
|
One-side welded bed plate for flanges in marine pipeline
|
|
GB/T 11693-1994
|
One-side welded bed plate for flanges in marine
|
|
GB/T 11693-2008
|
Welded bed plate for flanges of ship pipe
|
|
GB/T 11694-1989
|
Double face welded bed plate for flanges in marine pipeline
|
|
GB/T 11694-1994
|
Double face welded bed plate for flanges in marine
|
|
GB/T 11696-1989
|
Marine cast steel erect check valves
|
|
GB/T 11696-1996
|
Marine cast steel erect check valves
|
|
GB/T 11698-1989
|
Metal valves for use in marine flanged pipe systems--Face-to-face and centre-to-face dimensions
|
|
GB/T 11698-2008
|
Metal valves for use in marine flanged pipe systems -- Face-to-face and center-to-face dimensions
|
|
GB/T 11699-2003
|
Small craft with inboard engine -- Propeller shaft ends and bosses with 1: 10 taper
|
|
GB/T 11699-2008
|
Small craft with inboard engine -- Propeller shaft ends and bosses
|
|
GB/T 11700-2003
|
Small craft -- Marine propulsion engines and systems -- Power measurements and declarations
|
|
GB/T 11700-2009
|
Small craft -- Marine propulsion reciprocating internal combustion engines -- Power measurements and declarations
|
|
GB/T 11701-1989
|
The general rules for marine accommodation ladders
|
|
GB/T 11702-1989
|
Small craft waste water fittings
|
|
GB/T 11705-1989
|
Testing methods for marine electric three-spindle screw pump
|