|
US$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14800-2010: Geosynthetics -- Static puncture test (CBR test)
Status: Valid GB/T 14800: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14800-2010 | English | 154 |
Add to Cart
|
3 days [Need to translate]
|
Geosynthetics -- Static puncture test (CBR test)
| Valid |
GB/T 14800-2010
|
| GB/T 14800-1993 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Test method for determining the puncture resistance of geotextiles
| Obsolete |
GB/T 14800-1993
|
PDF similar to GB/T 14800-2010
Basic data | Standard ID | GB/T 14800-2010 (GB/T14800-2010) | | Description (Translated English) | Geosynthetics -- Static puncture test (CBR test) | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | W59 | | Classification of International Standard | 59.080.70 | | Word Count Estimation | 8,824 | | Date of Issue | 1/10/2011 | | Date of Implementation | 6/1/2011 | | Older Standard (superseded by this standard) | GB/T 14800-1993 | | Quoted Standard | GB/T 6529; GB/T 13760; GB/T 14798; GB/T 16825.1 | | Adopted Standard | ISO 12236-2006, IDT | | Regulation (derived from) | National Standards Bulletin 2011 No. (No. 166 overall) 1 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the top bar measured using the flat end of geosynthetics bursting strength approach. This standard is usually prescribed standard atmospheric humidity after the sample was. This Standard is applicable to all types of geosynthetics, but not more than 10 mm aperture of the material used. | GB/T 14800-2010: Geosynthetics -- Static puncture test (CBR test)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Geosynthetics. Static puncture test (CBR test)
ICS 59.080.70
W59
National Standards of People's Republic of China
Replacing GB/T 14800-1993
Geosynthetics
Static bursting test (CBR method)
(ISO 12236.2006, IDT)
Issued on. 2011-01-10
2011-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard uses the re-translation method identical with ISO 12236.2006 "Geosynthetics static bursting test (CBR method)" (in English
Version). This standard and ISO 12236.2006 the following editorial changes.
--- Normative references, reference is made to international standards corresponding to our standards, ISO 554 test standard atmosphere by the equivalent
Adoption of ISO 139 GB/T 6529 in place;
--- Delete directories and foreword;
--- Chapter 6 on the sample size increased injection;
--- Deleted Figures 2, 4a) and 4b) NOTE content.
This standard replaces GB/T 14800-1993 "geotextile bursting strength test method." This standard and GB/T 14800-1993 Main
The following differences.
--- Standard name changed to "Geosynthetics static bursting test (CBR method)";
--- Scope added sample requirement that the pore size of not more than 10mm of material;
--- Deleted the term "modification ratio";
--- Rate of movement from the top bar (60 ± 5) mm/min to (50 ± 5) mm/min;
--- Remove the top strut predetermined height of 100mm;
--- Remove the clamping device shall be greater than the specified base height of 100mm;
--- Add "pre-tension of 20N, start recording displacement";
--- Remove Appendix A.
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee based textile branch (SAC/TC209/SC1) centralized.
This standard by the Shaoxing Textile Institute Jiangnan Branch Co., Textile Standard (Beijing) Co., Ltd. is responsible for drafting Inspection and Certification Center.
The main drafters of this standard. Zhuangxiao Xiong, Zhou Hong, Wu Yani.
This standard replaces the standards previously issued as follows.
--- GB/T 14800-1993.
Geosynthetics
Static bursting test (CBR method)
1 Scope
This standard specifies the blunt end top bar measuring geosynthetics bursting strength of Methods.
This method is usually prescribed in the standard atmosphere on the sample after the humidity was.
This standard applies to all types of geosynthetics, but not material for the pore size greater than 10mm.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 6529 Textiles conditioning and testing using standard atmosphere (GB/T 6529-2008, ISO 139.2005, MOD)
GB/T 13760 Geosynthetics sampling and sample preparation (GB/T 13760-2009, ISO 9862.2005, IDT)
GB/T 14798 Geosynthetics site identification identification (GB 14798-2008, ISO 10320.1999, IDT)
Inspection and correction tension and (or) pressure testing machine force measuring system. GB/T 16825.1 of static uniaxial testing machines - Part 1
Associate (GB/T 16825.1-2008, ISO 7500-1.2004, MOD)
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Top pressure plungerforce
Top bar at a constant rate of displacement until the specimen top pressure when the measured force to penetrate the sample shown in Figure 1.
Note. The top pressure in kN (kN) indicates.
3.2
Bursting strength push-throughforce
Fp
Every single maximum top pressure test recorded, shown in Figure 1.
NOTE. bursting strength expressed as kN (kN).
3.3
Displacement displacement
Since the beginning of the pre-tension 20N, top bar distance traveled, see Figure 1.
NOTE. The shifts are expressed in millimeters (mm).
3.4
Bursting displacement push-throughdisplacement
hp
Top of displacement when breaking strength Fp, see Figure 1.
NOTE. Bursting displacement in millimeters (mm) Fig.
|