GB 18383-2007 PDF English
US$85.00 · In stock · Download in 9 secondsGB 18383-2007: General technical requirements for products with filling materials Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB 18383: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 18383-2007 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
General technical requirements for products with filling materials
| Valid |
| GB 18383-2001 | English | 199 |
Add to Cart
|
2 days
|
General technical requirement for products with wadding fibre
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 18383-2007
GB 18383-2007: General technical requirements for products with filling materials---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB18383-2007
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 59.080.99
W 59
Replacing GB 18383-2001
General technical requirements
for products with filling materials
Issued on. JANUARY 23, 2007
Implemented on. MAY 1, 2007
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword... 3
1 Scope... 6
2 Normative references... 6
3 Terms and definitions... 7
4 Requirements... 8
5 Inspection (test) methods... 10
6 Inspection rules... 11
7 Marks... 12
8 Packaging, storage and transport... 12
Annex A (Normative) Test method for short fibre content of filing and stuffing14
Annex B (Normative) Test method for impurity rate of filling and stuffing... 17
Annex C (Normative) Sampling method for fibre content test of filling and
stuffing... 19
Foreword
Sub-clauses 4.1, 4.2, Clause 5, Clause 6, Clause 7 of this Standard are
mandatory; others are recommendatory.
This Standard replaces GB 18383-2001 General technical requirement for
products with wadding fibre.
This Standard only specifies the requirements for basic general performance
of products with filling materials. Specific product requirements shall refer to
the corresponding standards.
Compared with GB 18383-2001, the main modifications in this Standard are
as follows.
a) modified the scope of GB 18383-2001 to “applicable to the domestic and
non- domestic products with filling materials” (Clause 1 of this Edition;
Clause 1 of Edition 2001);
b) added and modified some normative references (Clause 2 of this
Edition);
c) modified the definitions of “filling and stuffing”, “products with filling
materials” and “foreign matter” (3.1, 3.2, 3.8 of this Edition; 3.1, 3.2, 3.3
of Edition 2001);
d) added the terms and definitions of “domestic products with filling
materials”, “fibre waste”, “textile waste”, “rag flock”, “textile waste
derived from hospital” (3.3, 3.4, 3.5, 3.6, 3.7 of this Edition);
e) modified the requirements for raw materials, the use of
non-contaminated textile waste, a class of cotton linter in domestic
products with filling materials is not prohibited (4.1.2 of this Edition; 4.1.1,
4.1.3, 4.1.4 of Edition 2001);
f) added the specification that the non-contaminated textile waste as well
as the rag flock, under certain conditions, can be used as bedding raw
materials for domestic products with filling materials (4.1.3 of this
Edition);
g) deleted the quality requirements for cotton filling and stuffing AND
non-mandatory sensory requirements for filling and stuffing (4.1.2, 4.2 of
Edition 2001);
h) added the requirements that the substance and fiber content tolerance
must not be inspected in filling and stuffing of domestic products with
filling materials (4.1.4, 4.1.7 of this Edition);
i) modified the short fiber boundaries, content limits and scope of
application for filling and stuffing of domestic products with filling
materials (4.1.5 of this Edition; 4.1.2 of Edition 2001);
j) modified the application scope of impurity rate and hygienic requirements
(4.1.6, 4.2 of this Edition; 4.3, 4.5 of Edition 2001);
k) added the description of odor type (4.2.4 of this Edition);
l) added the inspection method for mandatory sensory requirement item,
sample preparation method for physical and chemical indicators
inspection, test method of filling and stuffing component contents of
domestic products with filling materials, odor test method (5.1, 5.2.1,
5.2.4, Annex C, 5.3.4 of this Edition);
m) modified the test method for short fiber content of filing and stuffing, the
test method for impurity rate (5.2.2, Annex A, 5.2.3, Annex B of this
Edition; 6.4, 6.2 of Edition 2001);
n) modified the sampling rules for filling and stuffing, products with filling
materials (6.1.1, 6.1.2 of this Edition; 5.2.2 of Edition 2001);
o) added the provisions on determination for inspection results and
re-inspection (6.2, 6.3 of this Edition);
p) added the requirements for expressing the nature of raw materials of
domestic products with filling materials and requirements for marking
the endurance warning for non-domestic products with filling materials
(7.2, 7.3 of this Edition).
Annex A, Annex B and Annex C of this Standard are normative.
This Standard was proposed by China Fiber Inspection Bureau.
This Standard shall be under the jurisdiction of and interpreted by China Fiber
Inspection Bureau.
Main drafting organizations of this Standard. China Fiber Inspection Bureau,
Liaoning Fiber Inspection Bureau, Jiangsu Fiber Inspection Institute, Hunan
Fiber Inspection Bureau, Guangdong Guangzhou Textile Fiber Inspection
Institute, Shandong Fiber Inspection Bureau, Emerging Vocational Equipment
Production Technology Research Institute (former the People's Liberation
Army General Logistics Production Technology Research Institute), China
Center for Disease Control and Prevention Environmental and Health and
Safety Products, Hubei Fiber Inspection Bureau, Zhejiang Institute of Fiber
Inspection, Hebei Fiber Inspection Bureau.
Main drafters of this Standard. Ge Jiawen, Gao Jin, Qin Yanhua, Qian
Shenghong, Su Guangrong, Sun Changlin, Li Xinwu, Wei Chengli, Guan
Xiaoyuan, Qi Tongxing.
This Standard was issued in 2001 for the first time. This is the first revision.
General technical requirements
for products with filling materials
1 Scope
This Standard specifies the terms, requirements, inspection (test) methods,
inspection rules, marks, packaging, storage and transport for products with
filling materials. This Standard is applicable to domestic and non-domestic
products with filling materials.
2 Normative references
The following standards contain the provisions which, through reference in
this Standard, constitute the provisions of this Standard. For dated references,
subsequent amendments (excluding corrections) or revisions do not apply to
this Standard. However, the parties who enter into agreement based on this
Standard are encouraged to investigate whether the latest versions of these
documents are applicable. For undated reference documents, the latest
versions apply to this Standard.
GB/T 2910, Textiles - Quantitative chemical analysis (GB/T 2910-1997,
eqv ISO 1833.1977)
GB/T 2911, Textiles--Ternary fibre mixtures--Quantitative analysis (GB/T
2911-1997, eqv ISO 5088.1976)
GB 5296.4, Instructions for use of products of consumer interest - Part 4.
Textiles and apparel
3 Terms and definitions
For the purposes of this document, the terms and definitions specified in
GB/T 5705 and the following ones apply.
3.1 filling and stuffing
a general designation for natural fiber, chemical fiber used for filling and
stuffing as well as the processed flakes, mats
3.2 products with filling materials
the products which use filling and stuffing as fillers and beddings; it can be
divided into domestic products with filling materials and non-domestic
products with filling materials
3.6 rag flock
the reprocessed fibre of textile product or textile waste by opening and
scotching way
3.7 textile waste derived from hospital
all kinds of fiber products eliminated or abandoned by medical and health
institutions, mainly including absorbent cotton, skim gauze and other medical
dressings, medical staff o clothes, products with filling materials and other
fibre products
3.8 foreign matter
a general designation for products without filling materials mixed in the
products with filling materials
4 Requirements
4.1 Raw material requirements
4.1.1 The following materials shall not be used directly or indirectly as raw
materials for the processing of products with filling materials.
4.1.2 In addition to 4.1.1, the following materials shall not be used directly or
indirectly as raw materials for the processing of domestic products with filling
materials.
a) contaminated fibre waste;
4.1.3 The uncontaminated textile waste or its rag flock, after high
temperature molding (hot melt) and disinfection process, may be used as
bedding material for products such as soft furniture which complies with the
national provisions.
4.1.6 The impurity rate of filling and stuffing in domestic products with filling
materials shall not be greater than 1.4%. The impurity rate of filling and
stuffing in other domestic products with filling materials shall not be greater
than 2.0%.
4.1.7 When the filling and stuffing (excluding the flakes and mats used for
soft furniture beddings) in domestic products with filling materials are made of
two or more fibers, the reduction of actual content of each component’s filling
and stuffing to the marked content must not exceed 10% (absolute
percentage). When the marked content of filling and stuffing is less than 30%,
its actual content must not be less than 70% of the marked content (the fiber
content is based on the net dry content).
4.2 Hygienic requirements for domestic products with filling materials
4.2.1 Pseudomonas aeruginosa, Staphylococcus aureus and hemolytic
streptococcus and other pathogens must not be inspected.
4.3 Other requirements
The other basic safety requirements and quality requirements for products
with filling materials shall be in accordance with relevant national standards
and industry standards.
5 Inspection (test) methods
5.1 Sensory inspection
It shall inspect the samples one by one extracted under suitable light
conditions for requirements of 4.1.1, 4.1.2, 4.1.3, 4.1.4, 4.2.3.
5.2 Physical and chemical indicators inspection
5.2.1 Sample preparation
5.2.3 Impurity rate test of filling and stuffing in domestic products with
filling materials
Carry out according to Annex B of this Standard.
5.2.4 Component content test of filling and stuffing in domestic
products with filling materials
Carry out according to GB/T 2910, GB/T 2911, FZ/T 01057 or other national
standards or industry standards. The sampling method for filling and stuffing
shall be in accordance with Annex C.
5.3 Inspection of health indicators
5.3.1 The inspections of pseudomonas aeruginosa, staphylococcus aureus
and hemolytic streptococcus shall be determined according to requirements
of GB 15979.
5.3.4 The odor inspection shall be carried out according to GB 18401.
5.4 Inspection of other indicators
The inspection and determination for other technical indicators of products
with filling materials shall be carried out according to relevant national
standards or industry standards.
6 Inspection rules
6.1 Sampling
6.1.1 Sampling for filling and stuffing
6.1.1.1 Sampling should be representative and should be extracted more at
random.
6.2 Determination of results
6.2.1 Should the inspection results of extracted samples comply with the
provisions of 4.1, 4.2, 7.2 and 7.3, this batch of products shall be determined
to meet this Standard.
6.2.2 Should any extracted sample fail to comply with any provisions of
4.1.1, 7.2 and 7.3, this batch of products shall be determined as unqualified.
6.2.3 Should any extracted sample fail to comply with any provisions of
4.1.2, 4.1.3, 4.1.4 and 4.2, this batch of products shall be determined to fail
meeting requirements for domestic products with filling materials.
6.3 Re-inspection
If there is any objection to the inspection results according to 4.1.5, 4.1.6 and
4.1.7, the re-inspection shall be carried out once. And the re-inspection
results shall prevail.
7 Marks
7.1 The marks for domestic products with filling materials shall comply with
the provisions of GB 5296.4.
7.2 For domestic products with filling materials produced by textile waste or
its rag flock according to requirements of 4.1.3, it shall express on each
pieces of product the raw material as “textile waste” or “rag flock”.
7.4 The marks for products with filling materials should also comply with
other national provisions.
8 Packaging, storage and transport
8.1 Packaging
The packaging materials should be non-toxic, harmless, clean, have sufficient
sealing and firmness, able to withstand the normal transport and storage, to
ensure that products with filling materials from mildew, moisture.
8.2 Storage
Store in a dry, ventilated, non-flammable, dirt-free warehouse.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 18383-2007 be delivered?Answer: The full copy PDF of English version of GB 18383-2007 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 18383-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB 18383-2007_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 18383-2007 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB 18383-2007?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 18383-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB 18383-2007?A step-by-step guide to download PDF of GB 18383-2007_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 18383-2007".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|