|
US$544.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16844-2023: Self-ballasted fluorescent lamps for general lighting service - Safety specifications
Status: Valid GB/T 16844: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 16844-2023 | English | 544 |
Add to Cart
|
5 days [Need to translate]
|
Self-ballasted fluorescent lamps for general lighting service - Safety specifications
| Valid |
GB/T 16844-2023
|
| GB 16844-2008 | English | 274 |
Add to Cart
|
3 days [Need to translate]
|
Self-ballasted lamps for general lighting services -- Safety requirements
| Valid |
GB 16844-2008
|
| GB 16844-1997 | English | 519 |
Add to Cart
|
3 days [Need to translate]
|
Self-ballasted lamps for general lighting services--Safety requirements
| Obsolete |
GB 16844-1997
|
PDF similar to GB/T 16844-2023
Basic data | Standard ID | GB/T 16844-2023 (GB/T16844-2023) | | Description (Translated English) | Self-ballasted fluorescent lamps for general lighting service - Safety specifications | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K71 | | Classification of International Standard | 29.140.30 | | Word Count Estimation | 30,389 | | Date of Issue | 2023-12-28 | | Date of Implementation | 2026-01-01 | | Older Standard (superseded by this standard) | GB 16844-2008 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 16844-2023: Self-ballasted fluorescent lamps for general lighting service - Safety specifications
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 29:140:30
CCSK71
National Standards of People's Republic of China
Replace GB 16844-2008
Safety specifications for self-ballasted fluorescent lamps for general lighting
Safetyspecifications
Safetyrequirements,IDT)
Published on 2023-12-28
Implemented on 2026-01-01
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 General requirements and general test requirements 3
5 signs 3
5:1 Lamp markings 3
5:2 Class marking 4
5:3 Eligibility of the mark 4
5:4 Logo 4
6 Interchangeability, mass and bending moments 5
6:1 Interchangeability 5
6:2 Bending moment and mass of the lamp acting on the lamp holder 5
7 Protection against electric shock 7
8 Insulation resistance and electrical strength 8
8:1 General requirements 8
8:2 Insulation resistance 8
8:3 Electrical strength 8
9 Mechanical strength 8
9:1 General requirements 8
9:2 Torque resistance 8
9:3 Axial pressure of screw-type lamp cap 11
10 Lamp head temperature rise 12
11 Heat resistance13
12 Fire protection and combustion prevention14
13 Fault status 14
13:1 General requirements 14
13:2 Test conditions 14
13:3 Simulation of lights not starting 15
14 Creepage distances and clearances15
15 End-of-life test of lamp 15
15:1 General requirements15
15:2 Test device 15
15:3 Eligibility16
16 Photobiosafety16
16:1 Ultraviolet radiation 16
16:2 Other photobiological effects 16
17 Abnormal work 16
18 Test conditions for dimming lamps and three-position lamps 17
19 All product ratings17
20 Verification of type test 17
21 Lighting Design Information18
Appendix A (informative) All product evaluation19
Appendix B (informative) Lamp design information 21
Reference 22
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document replaces GB 16844-2008 "Safety Requirements for Self-Ballasted Lamps for General Lighting": Compared with GB 16844-2008, except for the structure
In addition to adjustments and editorial changes, the main technical changes are as follows:
---Added "This document covers photobiological safety according to the requirements of IEC 62471 and IEC TR62471-2" (see Chapter 1);
---Added the definition of "effective ultraviolet radiation power ratio" (see 3:8);
---Added "mark position" (see 5:4);
---Added "bending moment and mass of the lamp acting on the lamp holder" (see 6:2);
---Added "axial pressure of screw-type lamp holder" (see 9:3);
---Added "simulation of light not starting" (see 13:3);
---Added "creepage distance and clearance" (see Chapter 14);
---Added "end-of-life test of lamp" (see Chapter 15);
---Added "photobiological safety" (see Chapter 16);
---Added "abnormal work" (see Chapter 17);
---Added "test conditions for dimming lamps and three-speed lamps" (see Chapter 18);
---Added "all product evaluation" (see Chapter 19);
---Added "type test verification" (see Chapter 20);
---Added "Lamp Design Information" (see Chapter 21):
This document is equivalent to IEC 60968:2015 "Safety Requirements for Self-ballasted Fluorescent Lamps for General Lighting":
This document has made the following minimal editorial changes:
---In order to coordinate with the existing standardization documents, the name of the document is changed to "Safety Specifications for Self-ballasted Fluorescent Lamps for General Lighting";
---Incorporates the contents of technical corrigendum IEC 60968:2015/COR1:2015:
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed by China Light Industry Federation:
This document is under the jurisdiction of the National Lighting Appliances Standardization Technical Committee (SAC/TC224):
This document was drafted by: Hengdian Group Debang Lighting Co:, Ltd:, Foshan Huaquan Electric Lighting Co:, Ltd:, Beijing Electric Light Source Research
Research Institute Co:, Ltd:, Weirong Technology Co:, Ltd:
The main drafters of this document: Cai Jinbiao, Zhou Chaoyang, Ke Boquan, Huang Shanshi:
The previous versions of this document and the documents it replaces are as follows:
---First published as GB 16844-1997 "Safety Requirements for Self-Ballasted Lamps for General Lighting" in:1997, and first revised in:2008;
---This is the second revision:
Safety specifications for self-ballasted fluorescent lamps for general lighting
1 Scope
This document applies to tubular fluorescent lamps (self-ballasted fluorescent lamps) that integrate control start-up and stable ignition components: This document stipulates
Safety and interchangeability requirements, as well as test methods and conditions for checking compliance:
This document is applicable to lamps used as general lighting in homes and similar occasions, with rated voltage 50V~250V, rated frequency 50Hz or
60Hz, the lamp head used meets the requirements of IEC 60061-1:
For lamp base and lampholder systems not specifically mentioned in this document, relevant information on safety-related tests provided by the manufacturer applies:
The requirements of this document relate only to type testing:
Recommended methods for total product inspection and batch product inspection are given in Appendix A:
This document has covered photobiological safety according to the requirements of IEC 62471 and IEC TR62471-2: Blue light and infrared hazards are lower than necessary
Find the level of identification:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
ISO 4046-4:2002 Glossary of paper, paperboard, pulp and related terms Part 4: Paper and paperboard grades and processed products
products)
Note: GB/T 4687-2007 Paper, cardboard, pulp and related terms (ISO 4046-4:2002, MOD)
IEC 60061-1 Lampcaps, lampholders and gauges for testing their interchangeability and safety - Part 1: Lampcaps and
Note: GB/T 1406:1-2008 Types and dimensions of lamp holders Part 1: Screw-type lamp holders (IEC 60061-1:2005, MOD)
GB/T 1406:2-2008 Types and dimensions of lamp holders Part 2: Pin-type lamp holders (IEC 60061-1:2005, MOD)
GB/T 1406:3-2021 Types and dimensions of lamp holders Part 3: Prefocused lamp holders (IEC 60061-1:2018, MOD)
GB/T 1406:4-2008 Types and dimensions of lamp holders Part 4: Miscellaneous lamp holders (IEC 60061-1:2005, MOD)
GB/T 1406:5-2008 Types and dimensions of lamp holders Part 5: Bayonet type lamp holders (IEC 60061-1:2005, MOD)
IEC 60061-3 Lampcaps, lampholders and gauges for testing their interchangeability and safety - Part 3: Gauges (Lampcapsand
Note: GB/T 1483:1-2008 Inspection Gauges for Lamp Holders and Lamp Holders Part 1: Gauges for Screw-type Lamp Holders and Lamp Holders (IEC 60061-3:2004, MOD)
GB/T 1483:2-2008 Inspection Gauges for Lamp Holders and Lamp Holders Part 2: Gauges for Plug-in Lamp Holders and Lamp Holders (IEC 60061-3:2004, MOD)
GB/T 1483:3-2008 Inspection Gauges for Lamp Holders and Lamp Holders Part 3: Gauges for Prefocused Lamp Holders and Lamp Holders (IEC 60061-3:2004, MOD)
GB/T 1483:4-2009 Inspection Gauges for Lamp Holders and Lamp Holders Part 4: Gauges for Miscellaneous Lamp Holders and Lamp Holders (IEC 60061-3:2004, MOD)
GB/T 1483:5-2008 Inspection Gauges for Lamp Holders and Lamp Holders Part 5: Gauges for Bayonet Lamp Holders and Lamp Holders (IEC 60061-3:2004, MOD)
rise)
Note: GB/T 24392-2009 Measurement method of lamp cap temperature rise (IEC 60360:1998, IDT)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16844-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 16844-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 16844-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16844-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 16844-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16844-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|