|
US$2014.00 ยท In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5226.32-2017: Electrical safety of machinery -- Electrical equipment of machines -- Part 32: Requirements for hoisting machines
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5226.32-2017 | English | 2014 |
Add to Cart
|
7 days [Need to translate]
|
Electrical safety of machinery -- Electrical equipment of machines -- Part 32: Requirements for hoisting machines
| Valid |
GB/T 5226.32-2017
|
PDF similar to GB/T 5226.32-2017
Basic data | Standard ID | GB/T 5226.32-2017 (GB/T5226.32-2017) | | Description (Translated English) | Electrical safety of machinery -- Electrical equipment of machines -- Part 32: Requirements for hoisting machines | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 29.020 | | Word Count Estimation | 106,196 | | Date of Issue | 2017-12-29 | | Date of Implementation | 2018-07-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 5226.32-2017: Electrical safety of machinery -- Electrical equipment of machines -- Part 32: Requirements for hoisting machines
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electrical safety of machinery-Electrical equipment of machines-Part 32. Requirements for hoisting machines
ICS 29.020
J80
National Standards of People's Republic of China
Replacing GB 5226.2-2002
Mechanical Electrical Safety Mechanical Electrical Equipment
Part 32. Lifting machinery technical conditions
Part 32.Requirementsforhoistingmachines
(IEC 60204-32.2008, Safetyofmachinery-Electricalequipmentof
machines-Part 32.Requirementsforhoistingmachines,IDT)
Published on.2017-12-29
2018-07-01 Implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Administration released
Directory
Preface III
Introduction V
1 Scope 1
2 Normative references 2
3 Terms and Definitions 5
4 Basic requirements 11
5 Introduce power line termination method and cut off switch 15
6 Protection against electric shock 21
7 Protection of electrical equipment 25
8 Equipotential bonding 29
9 Control Circuits and Control Functions 33
10 Control Devices Mounted on Operator Panels and Cranes 42
11 Control Equipment. Location, Installation, and Panels 47
12 wires and cables 50
13 Wiring Technology 56
14 Electric motors and related equipment 62
15 Accessories and Lighting 63
16 mark, warning sign and reference code 64
17 Document 66
18 Inspection 68
Appendix A (Normative) Indirect Contact Protection in TN Systems 73
Appendix B (informative annex) Lifting equipment electrical equipment checklist 76
Appendix C (Informative) Current Carrying Capacity and Over-Current Protection of Wires and Cables in Mechanical Electrical Equipment 79
Appendix D (informative) Selection of intermittent work conductors 84
Appendix E (Informative) Explanation of Emergency Operations 87
Appendix F (Informative) Cross-sectional area of common conductors
Appendix NA (Informative) Annex China's document with a consistent correspondence between normatively-referenced international documents.
References 92
Index 94
Foreword
GB/T 5226 "Mechanical Electrical Safety Electrical Equipment" is divided into the following sections.
--- Part 1. General technical conditions;
--- Part 6. Technical conditions for construction machinery;
--- Part 11. General Techniques for AC Voltage Above 1000V or DC Voltage Above 1500V but Not Greater Than 36kV
condition;
--- Part 31. Particular safety and EMC requirements for sewing machines, sewing units and sewing systems;
--- Part 32. Technical conditions for lifting appliances;
--- Part 33. Technical conditions for semiconductor equipment.
This part is Part 32 of GB/T 5226.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
This Part replaces GB 5226.2-2002 "Safety Machinery Electrical Equipment Part 32. Lifting Machinery Technical Conditions", with
The main technical changes compared to GB 5226.2-2002 are as follows.
--- Modified standard name (see cover, cover of.2002 edition);
--- Increased (continuous) ampacity (3.17), isolation device (3.20), emergency stop device (3.24), emergency disconnect device (3.25), functional connectivity
Junction (3.34), Inductive Power System (3.39), Manually Controlled Lifting Machinery (3.46), Protection Connection (3.54), Safety Related Control Functions
Energy (safety related control circuit) (3.62) 9 terms;
--- Increased electromagnetic compatibility (see 4.4.2);
--- Increased protection of the connection circuit (see 8.2);
--- Added emergency disconnect device (see 10.8) and enable control device (see 10.9);
--- Increased the use of automatic cut off the power supply for the protection of the inspection (see 18.2);
--- Increased the indirect contact protection in the TN system (see Appendix A) and the selection of intermittent work conductors (see Appendix D);
--- Increased the cross-sectional area of common conductors (see Appendix F);
--- Modify the motor overload protection (see 7.3,.2002 version 7.3);
--- Modified emergency stop (see 9.2.5.4.2, version 9.2.5.4.2 of the.2002 edition);
--- Modified wireless control (see 9.2.7, version 9.2.7 of.2002);
--- Removed 3 terms (see 3.17, 3.53, 3.59 in.2002 edition);
--- Removed the power system design (see 6.3.2.4 of the.2002 edition);
--- Removed the disconnection of the protective earth circuit (see 8.2.6 of the.2002 edition);
--- Removed access to the common reference potential (see 8.3.3 of the.2002 edition);
--- Removed control device connections (see version 9.1.4 of the.2002 edition);
--- Delete serial data communication (see 9.2.7.4 of the.2002 edition);
--- Deleted relevant safety control circuit (see 9.5 of.2002 edition);
--- Deleted Chapter 11 Electronic Equipment (Chapter 11 of the.2002 Edition).
This section uses the translation method identical to the use of IEC 60204-32.2008 "Safety machinery electrical equipment - Part 32. Lifting machinery
Technical conditions".
For the Chinese documents that have a consistent correspondence with the normatively cited international documents in this section, see Appendix NA.
This section made the following editorial changes.
--- To be consistent with the existing standard series, modify the standard name;
--- Increased data Appendix NA;
---In the 10.9 "Note" to increase the data elements, namely "three-position form can be found in GB/T 14048.20-2013."
This part is proposed by China Machinery Industry Federation.
This part is under the jurisdiction of the National Industrial Machinery Electrical System Standardization Technical Committee (SAC/TC231).
This section is responsible for the drafting unit. Beijing Lifting Transport Machinery Design and Research Institute, Zoomlion Co., Ltd., Beijing Machine Tool Research Institute.
Participated in the drafting of this section. Dalian Zhongyi Electric Co., Ltd., CSSC Ninth Design & Research Institute Co., Ltd., Xuzhou Heavy Machinery
Co., Ltd., Siemens (China) Co., Ltd., Shenzhen Huichuan Technology Co., Ltd., Weihua Group Co., Ltd., Zhejiang Sangang Lifting Co., Ltd.
Co., Ltd., Youngo Technology Co., Ltd., Guangxi Construction Engineering Group Construction Machinery Manufacturing Co., Ltd., Liaoning Guoyuan Technology Co., Ltd.
Division, Nanjing Switch Factory Co., Ltd.
The main drafters of this section. Yue Wenzhao, Zhao Chunhui, Zhao Liyuan, Xue Ruijuan, Zeng Yang, Cheng Tao, Zhang Jun, Zhu Changjian, Duan Long, Xia Xiang, Zhou Qiang,
Zhou Feng, Fan Dashan, Lin Yong, Song Yi, Wu Yiguo.
The previous editions of the standards replaced by this section are.
---GB 5226.2-2002.
Introduction
This section proposes technical requirements and recommendations for lifting equipment electrical equipment in order to promote improvement.
---Safety of personnel and property;
--- Control response consistency;
---Maintenance convenience.
High performance should not be achieved by reducing the above basic requirements.
Figure 1 and Figure 2 help to understand the relationship between each link of a crane and its associated equipment. Figure 1 shows a typical material moving
The overall block diagram of the transport system (a group of cooperating cranes), Figure 2 is a block diagram of a typical crane and associated equipment, which represents the
It involves all aspects of electrical equipment.
Figure 1 Crane block diagram of joint operations in a typical port material handling system
Figure 2 Block diagram of a typical crane and its associated electrical equipment
Mechanical Electrical Safety Mechanical Electrical Equipment
Part 32. Lifting machinery technical conditions
1 Scope
This part of GB/T 5226 applies to electrical and electronic equipment and systems related to lifting appliances.
Note 1. In this part, the term "electrical" includes both electrical and electronic (ie, electrical equipment refers to both electrical equipment and electronic equipment).
Note 2. In this section, the term "personnel" refers to any individual and any person who is assigned to use or manage lifting appliances by the user or his agent.
The equipment contained in this section starts from the power supply access point (crane power switch) of the crane electrical equipment, including the crane
External power supply and control feeder systems, such as flexible cables or collector wires or trolley wires (see Figure 3).
Note 3. See IEC 60364 for building power installation requirements.
This section applies to electrical equipment and its components, the line voltage does not exceed 1000V (ac) or 1500V (dc), rated frequency is not exceeded
Over.200Hz.
Note 4. For high voltage requirements see IEC 60204-11.
Additional and special requirements may be specified for electrical equipment used in lifting appliances in the following environments.
--- For outdoor use (ie outside the building or other protective structure);
--- Used to handle or transport potentially explosive substances (eg paint or sawdust);
--- For potentially explosive materials or flammable gases;
--- For mines.
For this part, lifting machinery includes various types of cranes, various types of winches, and railroad roadway stacker cranes, including
The following types of products.
---Bridge crane;
---Mobile cranes;
---Tower cranes;
---Portable cranes;
---Gantry crane;
--- Shore cranes;
--- Floating cranes;
--- various winches;
---Hoist and accessories;
--- Loading cranes;
---Cable cranes;
--- Load holding device;
---Railway stacking cranes;
--- Monorail transport system;
--- Straddle vehicles;
---Tire gantry cranes (RTGs).
This section refers to the selection and installation of electrical equipment components, but does not involve the components themselves.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
|