|
US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 4893.7-2013: Test of surface coatings of furniture -- Part 7: Determination of surface resistance to alternation of heat and cold
Status: Valid GB/T 4893.7: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 4893.7-2013 | English | 169 |
Add to Cart
|
3 days [Need to translate]
|
Test of surface coatings of furniture -- Part 7: Determination of surface resistance to alternation of heat and cold
| Valid |
GB/T 4893.7-2013
|
| GB/T 4893.7-1985 | English | 70 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Furniture--Assessment of surface resistance to alternation of heat and cold
| Obsolete |
GB/T 4893.7-1985
|
PDF similar to GB/T 4893.7-2013
Basic data | Standard ID | GB/T 4893.7-2013 (GB/T4893.7-2013) | | Description (Translated English) | Test of surface coatings of furniture -- Part 7: Determination of surface resistance to alternation of heat and cold | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y80 | | Classification of International Standard | 97.140 | | Word Count Estimation | 7,710 | | Older Standard (superseded by this standard) | GB/T 4893.7-1985 | | Regulation (derived from) | National Standards Bulletin No. 21 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies: wooden pieces of furniture surface resistance to heat and cold performance test methods. This standard applies to: Determination of wooden furniture in the surface film resistance to hot and cold temperature performance. | GB/T 4893.7-2013: Test of surface coatings of furniture -- Part 7: Determination of surface resistance to alternation of heat and cold
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test of surface coatings of furniture Part 7.. Determination of surface resistance to alternation of heat and cold
ICS 97.140
Y80
National Standards of People's Republic of China
Replacing GB/T 4893.7-1985
Furniture surface coating physical and chemical properties test
Part 7. Determination of resistance to heat and cold
Testofsurfacecoatingsoffurniture-Part 7. Determinationof
Issued on. 2013-10-10
2014-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 4893 "Test physical and chemical properties of surface coatings of furniture" is divided into nine sections.
--- Part 1. Determination of resistance to cold liquids;
--- Part 2. Determination of resistance to heat;
--- Part 3. Determination of dry heat resistance;
--- Part 4. cross-cut adhesion assay;
--- Part 5. Determination of thickness;
--- Part 6. Determination of luster;
--- Part 7. Determination of resistance to heat and cold;
--- Part 8. Determination of abrasion resistance;
--- Part 9. Determination of impact.
This section GB/T 4893 Part 7.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 4893.7-1985 "furniture surface resistance to heat and cold assay", compared with the GB/T 4893.7-1985
The main technical changes are as follows.
--- Increasing the range (see Chapter 1);
--- Modify the materials and equipment, removed the refrigerator temperature, balance, increased aluminum foil tape, dry cotton cloth (see Chapter 2);
--- Modify the sample requirements, sample before coating after the completion of the storage time of the sample and test requirements have been modified to delete the sample delivery
Sample reporting requirements should be included (see Chapter 3);
--- Modify the test conditions and steps to increase the sample pretreatment requirements, increasing the foil tape edge to determine the sample
It puts way to reduce the relative humidity, high temperature test (see Chapter 4);
--- Increase the test results and evaluation (see Chapter 5);
--- Remove the test results evaluation and test report (see the 1985 edition of Chapter 5).
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
This part is proposed by the China Light Industry Federation.
This part of the furniture by the National Standardization Technical Committee (SAC/TC480) centralized.
This part mainly drafted by. Zhejiang Furniture & Hardware Institute, Shanghai Institute of Quality Supervision, Inspection, Zhongshan City, Guangdong Province
Quality Supervision, Inspection, Jiangsu Province Product Quality Supervision and Inspection Institute, Foshan Bondlye Paint Co., Bauhinia paints (on
Sea) Limited, Guangdong Federal Furniture Holdings Limited.
The main drafters of this section. Zhao Xingang, Jiang Jun, Gu Ming, Li Dehua, Mega Liang, Zhu Yuhong, Huang Haozhe, Lu Zhongqi, Suyue Xiao, Chen Jiwen,
Yang Xiaoping, Zhoushan Lin.
This part of the standard replaces the previous release case.
--- GB/T 4893.7-1985.
Furniture surface coating physical and chemical properties test
Part 7. Determination of resistance to heat and cold
1 Scope
GB/T 4893 provisions of this part of the test method for wood pieces of furniture surface resistance to heat and cold performance.
This section applies to the determination of wooden furniture in the surface film of heat and cold resistance performance.
Materials and equipment
2.1 temperature and humidity chamber. Accuracy ± 1 ℃.
2.2 four times the magnifying glass.
2.3 edge materials. aluminum foil tape or flat brush temples, paraffin wax and rosin.
2.4 furnace.
2.5 dry cotton cloth.
3 Sample Requirements
3.1 Sample size 250mm × 200mm. After finishing the specimen shall not be less than 15 ℃ temperature environment placed ventilation after 7d
experimenting. May also be in the rear has been completely dried finished furniture directly test specimen preparation.
3.2 Number of samples of four. 3 a test, a comparison.
3.3 specimen surface smooth, no bubble, scratches, faded, wrinkled skin and other defects.
4 Test conditions and procedures
4.1 Pretreatment
Before the test specimen shall be at a temperature of 20 ℃ ± 2 ℃, relative humidity of 60% to 70% for pre-processing 24h.
4.2 Test cycle
Should be based on the requirements of product standards or determine supply and demand side, the absence of special provisions, the recommended temperature is 40 ℃ ± 2 ℃, relative humidity
95% ± 3% and -20 ℃ ± 2 ℃; with 3 cycles.
4.3 Determination
4.3.1 Edge material with predetermined sides and back of the sample seal. The use of paraffin wax - rosin mixture Edge, the mixing ratio of 1.1.
4.3.2 specimens should be placed inside the constant temperature and humidity level.
4.3.3 a test cycle consists of two phases. The first stage. temperature 40 ℃ ± 2 ℃, relative humidity of 95% ± 3%, 1h; the second stage
Section. Cold -20 ℃ ± 2 ℃, 1h. High and low temperature transfer time shall not exceed 2min.
After the test at the end of 4.3.4, the sample at 20 ℃ ± 2 ℃, relative humidity of 60% to 70% of the conditions placed 18h, dry with a clean cotton cloth
Cleaning the surface to be checked.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4893.7-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 4893.7-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 4893.7-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4893.7-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 4893.7-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4893.7-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|