|
US$1159.00 ยท In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 43857-2024: Safety and management requirements for teaching facilities
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 43857-2024 | English | 1159 |
Add to Cart
|
7 days [Need to translate]
|
Safety and management requirements for teaching facilities
| Valid |
GB/T 43857-2024
|
PDF similar to GB/T 43857-2024
Standard similar to GB/T 43857-2024 GB 21027 JY/T 0587 GB/T 37624 GB/T 37773 Basic data | Standard ID | GB/T 43857-2024 (GB/T43857-2024) | | Description (Translated English) | Safety and management requirements for teaching facilities | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y52 | | Classification of International Standard | 03.180 | | Word Count Estimation | 58,519 | | Date of Issue | 2024-04-25 | | Date of Implementation | 2024-08-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 43857-2024: Safety and management requirements for teaching facilities---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 03:180
CCSY52
National Standards of People's Republic of China
Safety and management requirements for teaching facilities
Released on 2024-04-25
2024-08-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 5
4 Safety Principles 7
5 General requirements 7
6 Safety technical requirements 8
6:1 Design and Layout 8
6:2 Equipment Installation 9
6:3 Environmental related facilities 9
6:4 Electrical safety 10
6:5 Machinery safety 14
6:6 Dangers of strong light and radiation 16
6:7 Protection against release of gases and substances, explosions and implosions 17
6:8 Surface temperature protection 18
6:9 Heating and cooling facilities 19
6:10 Facilities related to hazardous chemicals19
6:11 Facilities related to dust safety 21
6:12 Glassware22
6:13 Gas storage tanks 22
6:14 Special equipment 22
6:15 Water supply and drainage facilities 23
6:16 Gas supply facilities 24
6:17 Biosafety24
6:18 Sports Equipment25
6:19 School furniture 25
6:20 Personal protective equipment 26
6:21 Emergency safety facilities 28
6:22 Security System 31
6:23 Safety Information Management System 32
6:24 Security Information Identification System 32
6:25 Equipment Instructions 32
7 Safety management requirements 32
7:1 Objective 32
7:2 Management requirements 33
7:3 Risk Assessment 34
7:4 System and plan 34
7:5 Training and Education 36
7:6 Accident Handling 37
7:7 Evaluation and Improvement 37
8 Safety requirements for use 38
8:1 Basic requirements 38
8:2 Fixed installation facilities 39
8:3 Non-fixed installations 39
Appendix A (Normative) Risk Assessment 40
A:1 General requirements 40
A:2 Risk assessment process 40
A:3 Basis for risk identification 40
A:4 Scope of risk identification 40
A:5 Risk identification 40
A:6 Risk Analysis42
A:7 Risk Assessment43
A:8 Risk Response 43
A:9 Risk Assessment Documentation43
A:10 Risk Assessment Report43
A:11 Risk and hidden danger rectification 43
Appendix B (Informative) Common safety hazards and countermeasures for the use of teaching facilities in primary and secondary school teaching places 44
B:1 Mechanical safety hazards 44
B:2 Hot and cold safety hazards 46
B:3 Hidden dangers of electricity safety 47
B:4 Chemical safety hazards 48
B:5 Radiation safety hazards 48
B:6 Safety hazards caused by strong light 48
B:7 Noise safety hazards 49
B:8 Drowning safety hazards 49
B:9 Microbiological safety hazards 49
B:10 Explosion safety hazards 49
B:11 Other safety hazards 49
References 51
Foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents"
Drafting:
Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents:
This document is proposed by the Ministry of Education of the People's Republic of China:
This document is under the jurisdiction of the National Technical Committee for Standardization of Educational Equipment (SAC/TC125):
This document was drafted by: Education Technology and Resources Development Center of the Ministry of Education (Central Audiovisual Education Center), China National Institute of Standardization, Tsinghua University
Nankai University, Beijing Normal University, Zhejiang Education Technology Center, China University of Metrology, North China Electric Power University, Beijing Chaoyang District Aidi Foreign Language School
Chinese language school:
The main drafters of this document are: Dang Jianwei, Zhang Yaodong, Zhu Xiaocui, Qi Geqi, Hou Fei, Ai Desheng, Zhao Huiying, Sun Zhen, Sun Qian, Liu Junbo,
Zhang Pengyi, Li Song, Yang Feng, Ren Weide, Zhang Min, Zhao Xiang, Cao Lili, Wang Sen, Shi Liwu, Liu Junhua, Jiang Weidi, Zeng Yi, Xing Liqiang, Yan Zongliang,
Zhou Youyou, Xu Shengping, and Tian Haixin:
Safety and management requirements for teaching facilities
1 Scope
This document proposes the safety principles for school teaching facilities, and stipulates general requirements, safety technical requirements, safety management requirements and safety
Requirements:
This document applies to the design, installation, purchase, use and maintenance of teaching facilities for newly built, renovated and expanded colleges, vocational schools, and ordinary primary and secondary schools:
The teaching facilities of training institutions, practical training centers and other related teaching institutions can be used as a reference:
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document:
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document:
GB/T 150 (all parts) Pressure vessels
GB/T 1002 Types, basic parameters and dimensions of single-phase plugs and sockets for household and similar purposes
GB/T 1003 Types, basic parameters and dimensions of three-phase plugs and sockets for household and similar purposes
GB 2626 Respiratory protection Self-priming filter type anti-particulate respirator
GB 2811 Head protection helmet
GB 2890 Respiratory protection self-priming filter type gas mask
GB/T 2893:1 Graphic symbols, safety colors and safety signs Part 1: Design principles for safety signs and safety markings
GB/T 2893:2 Graphic symbols, safety colors and safety signs Part 2: Design principles for product safety labels
GB/T 2893:5 Graphic symbols, safety colors and safety signs Part 5: Principles and requirements for the use of safety signs
GB 2894-2008 Safety signs and their use guidelines
GB/T 3324 General technical requirements for wooden furniture
GB/T 3325 General technical requirements for metal furniture
GB/T 3836:1 Explosive atmospheres Part 1: General requirements for equipment
GB/T 3836:2 Explosive atmospheres Part 2: Equipment protected by flameproof enclosure "d"
GB/T 3836:4 Explosive atmospheres Part 4: Equipment protected by intrinsic safety type "i"
GB 3836:14 Explosive atmospheres Part 14: Classification of locations Explosive gas atmospheres
GB/T 4208-2017 Enclosure protection degree (IP code)
GB 4351:1 Portable fire extinguishers Part 1: Performance and structural requirements
GB 4706:1 Safety of household and similar electrical appliances Part 1: General requirements
GB 4793:1 Safety requirements for electrical equipment for measurement, control and laboratory use Part 1: General requirements
GB 4943:1 Audio, video, information technology and communication technology equipment Part 1: Safety requirements
GB/T 5226:1-2019 Electrical safety of machinery Electrical equipment of machinery Part 1: General technical requirements
GB/T 5296:1 Instructions for use of consumer products Part 1: General
GB/T 5959:1-2019 Safety of electric heating and electromagnetic processing equipment Part 1: General requirements
GB/T 6067 (all parts) Safety regulations for lifting machinery
GB 6095 Fall protection safety belt
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 43857-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 43857-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 43857-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 43857-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|