|
US$354.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29063-2012: Road vehicles -- Brake lining friction materials -- Standard performance test procedure for commercial vehicles with air brakes
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29063-2012 | English | 354 |
Add to Cart
|
3 days [Need to translate]
|
Road vehicles -- Brake lining friction materials -- Standard performance test procedure for commercial vehicles with air brakes
| Valid |
GB/T 29063-2012
|
PDF similar to GB/T 29063-2012
Basic data | Standard ID | GB/T 29063-2012 (GB/T29063-2012) | | Description (Translated English) | Road vehicles -- Brake lining friction materials -- Standard performance test procedure for commercial vehicles with air brakes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q69 | | Classification of International Standard | 43.040.40 | | Word Count Estimation | 18,165 | | Quoted Standard | ISO 611-2003; ISO 1176; ISO 3833; ISO 11157-2005; ISO 15484; UNECE RE3-1999 | | Adopted Standard | ISO 26865-2009, IDT | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies selsyn product classification, technical requirements, test methods, inspection rules, as well as signs of quality assurance, packaging, transportation and storage. This standard applies to one-on- pole contact selsyn. | GB/T 29063-2012: Road vehicles -- Brake lining friction materials -- Standard performance test procedure for commercial vehicles with air brakes
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Road vehicles. Brake lining friction materials. Standard performance test procedure for commercial vehicles with air brakes
ICS 43.040.40
Q69
National Standards of People's Republic of China
Road vehicles - Brake lining friction materials
Commercial vehicle air brake performance test method
(ISO 26865.2009, IDT)
Issued on. 2012-12-31
2013-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses the translation method identical with the international standard ISO 26865.2009 "Road vehicles - Brake linings brake friction material gas supplier
Car Standard Performance test procedures. "
Correspondence between the consistency of the standards of international documents and normative references of the following documents.
--- GB/T 5620 Road vehicles and trailer brake Terminology and definitions (GB/T 5620-2002, ISO 611.
1994, IDT);
--- GB/T 15089 motor vehicles and trailers classification (GB/T 15089-2001, eqvUNECER.E.3);
--- GB/T 26738 Road vehicles - Brake lining friction materials product validation and quality assurance (GB/T 26738-2011,
ISO 15484.2008, IDT).
The standard proposed by China Building Materials Federation.
The standard and non-metallic mineral products by the National Standardization Technical Committee (SAC/TC406) centralized.
This standard was drafted. Dongying Brilliant Brake System Co., Ltd., Wuhan Yuanfeng Friction Materials Co., Ningguo Fei Eagle auto parts
Co., Ltd., Hubei dragon friction sealing materials Co., Ltd., Tonglu Yu Xin Auto Parts Co., Ltd., Shandong Province Liangshan car with god
Ltd., Zhuhai Haig Riley Friction Materials Co., Ltd. Chongqing Hongyu friction products, non-metallic mineral products National Quality Supervision
Inspection Center.
The main drafters of this standard. Shi Zhigang, HEZE Kang Li, Wang Jin, Zhang Hongguang, Sun Qichun, Mayan Bing, Wang Shengxin, Fengjing You, Han Yi-hui,
Ying Wang Dan, Zhang Shishao.
Introduction
Test procedures unified commercial performance testing of friction material worldwide technology organization is a big challenge.
Friction material was tested and evaluated under different conditions in order to determine the breadth of the data. In the different stages of the product life data
(Such as manufacturing process development, production validation, quality control, product specifications/problem identification and assessment of applications, etc.) is critical.
This standard is part of the friction material globally standardized ISO 15484, is the major car manufacturers, brake systems and parts manufacturing
Suppliers, testing services and standardization organizations [such as SAE and JSAE (Japan Automobile Standards Organization)] the product of close collaboration between.
By a different truck, trailer manufacturers require a wide range of performance tests have been shown to not only time consuming, but also led to friction same purpose
Repeat evaluation material, and due to different test procedures and test conditions, the test results may not coincide with each other.
Road vehicles - Brake lining friction materials
Commercial vehicle air brake performance test method
1 Scope
This standard applies to UNECER.E.3 in M2, M3, N2, N3, O3 and O4 class air brakes for commercial vehicles.
This standard also applies to ISO 15484 definition of product development, product trial, product specification or validation and mass-produced products.
When used in conjunction with other applicable standards or test procedures, the standard provides a friction material under certain conditions market or car factory
Full and complete evaluation methods.
Note. Other applicable standards and test procedures including ISO , JIS/JASO (Japanese Industrial Standards/Japan Automobile Standards Organization), SAE (USA Automotive Engineering
Institute of Surveyors), national standards or specifications, test procedures, or other items specified by the user.
This standard does not include the vehicle under different conditions and the braking distance and the braking force distribution-related performance standards or national regulations to
Requirements, different vehicle conditions are mainly speed, temperature, adhesion coefficient, load and brake condition.
This standard specifies a single head dynamometer performance test procedures, aimed at the commercial vehicle air brake test procedure standardized for the different
All test procedures contain a unique performance requirements.
Performance evaluation test sequence includes the following conditions.
--- Run-around performance test;
--- After running and moderate temperatures after brake failure;
--- Temperature, velocity and pressure sensitivity under the influence;
--- Downhill simulation;
--- Brake recovery.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 611.2003 Road vehicles and trailer brake Terminology and definitions (Roadvehicles-brakingofautomo-
tivevehiclesandtheirtrailers-Vocabulary)
ISO 1176 Road vehicles - Vocabulary and code quality (Roadvehicles-Masses-Vocabularyandcodes)
ISO 3833 Road vehicles - Types - Terms and definitions (Roadvehicles-Types-Termsanddefinitions)
ISO 11157.2005 Road vehicles - Brake lining assembly Inertia bench test methods (Roadvehicles-Brakelining
assemblies-Inertiadynamometertestmethod)
ISO 15484 Road vehicles - Brake lining friction materials product validation and quality assurance (Roadvehicles-Brakelining
frictionmaterials-Productdefinitionandqualityassurance)
UNECER.E.3 (1999) classification of motor vehicles and trailers (ConsolidatedResolutionontheConstructionof
Vehicles)
3 Terms and Definitions
UNECER.E.3, ISO 611, ISO 1176, ISO 3833, ISO 15484 and defined by the following terms and definitions apply to this
file.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29063-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 29063-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 29063-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29063-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|