|
US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
YC/T 237-2023: Code of practice for standardized production of flue-cured tobacco
Status: Valid YC/T 237: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YC/T 237-2023 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Code of practice for standardized production of flue-cured tobacco
| Valid |
YC/T 237-2023
|
| YC/T 237-2008 | English | 479 |
Add to Cart
|
3 days [Need to translate]
|
Rules for standardized production of tobacco leaves in demonstration district
| Obsolete |
YC/T 237-2008
|
PDF similar to YC/T 237-2023
Basic data | Standard ID | YC/T 237-2023 (YC/T237-2023) | | Description (Translated English) | Code of practice for standardized production of flue-cured tobacco | | Sector / Industry | Tobacco Industry Standard (Recommended) | | Classification of Chinese Standard | X85 | | Classification of International Standard | 65.160 | | Word Count Estimation | 18,118 | | Date of Issue | 2023-05-31 | | Date of Implementation | 2023-08-01 | | Older Standard (superseded by this standard) | YC/T 237-2008 | | Issuing agency(ies) | State Tobacco Monopoly Administration | YC/T 237-2023: Code of practice for standardized production of flue-cured tobacco---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 65.160
CCSX85
Tobacco Industry Standards of the People's Republic of China
Replace YC/T 237-2008
Standardized work procedures for tobacco leaf production
Published on 2023-05-31
2023-08-01 Implementation
Released by the State Tobacco Monopoly Administration
Table of contents
Preface III
Introduction IV
1 Scope 1
2 Normative reference documents 1
3 Terms and Definitions 1
4 Basic requirements 2
4.1 Demand orientation 2
4.2 Goal-led 2
4.3 Adjust measures to local conditions 2
4.4 Innovation Drive 2
5 Contents and Requirements 2
6 Basic work 3
6.1 Goal setting 3
6.2 Planning and planning 3
6.3 Organization and Responsibilities 3
6.4 Operation Management 3
7 Construction of Tobacco Leaf Production Standard System 3
7.1 Standard system planning 3
7.2 Standardized object recognition 3
7.2.1 Identification of standardized objects related to product quality 3
7.2.2 Identification of standardized objects related to production management 4
7.3 Analysis of the current status of the standard system 4
7.4 Standard formulation and revision 4
7.4.1 Standard development and revision plan 4
7.4.2 Standard formulation and revision management 4
8 Standard Implementation and Supervision and Inspection 4
8.1 Standard implementation requirements 4
8.2 Standard implementation and supervision and inspection plan 5
8.3 Supervision and inspection requirements 5
8.3.1 Supervision and inspection content 5
8.3.2 Supervision and inspection methods 5
8.3.3 Disposal of supervisory inspection results 5
9 Evaluation and Improvement 5
9.1 Evaluation requirements 5
9.2 Continuous improvement 6
9.2.1 Summary analysis 6
9.2.2 Improvement 6
10 Standardization Innovation 6
Appendix A (informative) Tobacco leaf production standard architecture design 7
Appendix B (informative) Identification of standardized objects related to tobacco leaf product quality 8
Appendix C (informative) Identification of standardized objects related to tobacco production management10
Appendix D (Informative) Tobacco Leaf Production Standard System Evaluation Table 12
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
Compared with YC/T 237-2008, in addition to structural adjustments and editorial changes, the main technical changes in this document are as follows.
---Changed the scope of application of the standard (see Chapter 1, Chapter 1 of the.2008 edition);
---Change "General Provisions" to two chapters. "Basic Requirements" and "Contents and Requirements" (see Chapter 4, Chapter 5, Chapter 4 of the.2008 edition);
---Changed the construction requirements and classification methods of the tobacco production standard system (see Chapter 7, Chapter 5~Chapter 7 of the.2008 edition), adding
Added the identification of standardized objects, evaluation of the current status of the standard system and requirements for standard formulation and revision (see Chapter 7);
---Added standards implementation and supervision and inspection requirements (see Chapter 8);
---Added evaluation and improvement requirements (see Chapter 9);
---Added relevant standardization innovation requirements (see Chapter 10);
---Deleted the demonstration and promotion requirements (see Chapter 8 of the.2008 edition).
This document is proposed by the State Tobacco Monopoly Administration.
This document is under the jurisdiction of the Agriculture Sub-Technical Committee of the National Tobacco Standardization Technical Committee (SAC/TC144/SC2).
This document was drafted by. China Tobacco Standardization Research Center, Yunnan Tobacco Monopoly Bureau (Company), Guizhou Tobacco Monopoly Bureau (Company),
Sichuan Tobacco Monopoly Bureau (Company), Hunan Tobacco Monopoly Bureau (Company), Shaanxi Tobacco Monopoly Bureau (Company), Wenshan Tobacco Company, Kunming
Municipal Tobacco Company, Bijie Tobacco Company, Shandong Linyi Tobacco Co., Ltd., Nanyang Tobacco Company, Guangyuan Tobacco Company, Anhui Wannan Tobacco Company
LEAF LIMITED.
The main drafters of this document. Yang Guotao, Fan Li, Li Qingchang, Lei Qiang, Peng Shuguang, Shen Junru, Ma Ming, Zhang Jiatao, Cheng Yuyuan, Chen Zhifeng,
Chen Chao, Zeng Yuntao, Liu Yuan, Zhang Qing, Xu Tianyang, Wang Zhijiang, Mei Xingxia, Gu Huizhan, Shu Fangguo, He Chen, Xia Fandao, Guan Yu, Li Jie, Zhao Yu,
Li Pengfei, Zhu Qifa, Gao Qiang, Cao Tingmao, Chen Liping.
The previous versions of this document and the documents it replaces are as follows.
---First issued in.2008 as YC/T 237-2008;
---This is the first revision.
Introduction
Standardization is an important support for promoting agricultural and rural modernization. The implementation of tobacco leaf production standardization is to promote the transformation and upgrading of tobacco leaf production and high-quality
It is a powerful means of quantitative development and plays an important role in improving the quality of tobacco products, ensuring product quality and safety, improving the efficiency of tobacco production and operation, and building a modern tobacco industry.
Grassland agriculture plays an important supporting role. Issuance and implementation of YC/T 237-2008 "Working Regulations for Tobacco Leaf Standardized Production Demonstration Zone"
It clarified the requirements and methods for the construction of tobacco leaf standardized production demonstration areas, and effectively promoted the construction of tobacco leaf standardized production demonstration areas in the industry. But since
In the more than ten years since the issuance and implementation of YC/T 237-2008, the content of tobacco leaf production standardization work has been continuously expanded and enriched.
The internal and external environment have also undergone major changes, and the original standard content can no longer meet the requirements of tobacco leaf production standardization work; at the same time, the industry is showing
A large amount of experience has also been accumulated during the construction of the model area, which needs to be summarized and promoted. In view of this, it is indeed necessary to revise YC/T 237-2008,
In order to adapt to the new situation and new needs of tobacco leaf production and operation, the focus of tobacco production standardization work should be shifted from the construction of demonstration areas to comprehensive and systematic implementation.
Implementation to better serve the high-quality development of tobacco production in the industry.
This revision is guided by the PDCA management concept of "Plan→Do→Check→Act".
The PDCA cycle optimizes and improves the tobacco leaf production standardization work to enhance the systematicness of the tobacco leaf production standardization work and improve the overall
Work efficiency (as shown in Figure 1).
Note 1.Organize and carry out standardized tobacco production work based on the needs of customers and relevant parties, its own production and operation goals, etc.
Note 2.The PDCA cycle model of standardized tobacco production work refers to.
P---Plan and formulate tobacco leaf standardized production goals, plans and plans based on customer needs, relevant party needs and own production and operation goals, and improve
Basic work such as the standardized production and operation mechanism of whole tobacco leaves;
D---Identify tobacco leaf production standardization objects, optimize or build the tobacco leaf production standard system, and organize and carry out standard publicity, training and implementation as planned
Activity;
C---Supervise and inspect the implementation of tobacco production standards and evaluate tobacco production standardization work according to target requirements, plan arrangements, etc.
effectiveness and form a report;
A---Based on the satisfaction of customers and relevant parties, the realization of production and operation goals, the quality status of tobacco products and the problems discovered during standard implementation inspections
etc., take targeted improvement measures and make innovations when necessary to improve the overall effect.
Figure 1 PDCA cycle model diagram of tobacco leaf production standardization work
Standardized work procedures for tobacco leaf production
1 Scope
This document stipulates the basic requirements, main work contents and methods of tobacco production standardization work.
This document is applicable to the organization, implementation, evaluation and improvement of tobacco leaf production standardization work.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document.
GB/T.20000.1 Guidelines for standardization work Part 1.Common terms for standardization and related activities
3 Terms and definitions
The terms and definitions defined in GB/T.20000.1 and the following apply to this document.
3.1
standardization
In order to obtain the best order within the established scope, promote common benefits, and establish common use and reuse for actual or potential problems.
terms and activities for preparing, publishing and applying documents.
Note 1.The terms established by standardization activities can form standardization documents, including standards and other standardization documents.
Note 2.The main benefits of standardization are to improve the suitability of products, processes or services for their intended purposes and to promote trade, exchanges and technical cooperation.
[Source. GB/T.20000.1-2014,3.1]
3.2
standard standard
Through standardization activities, it is formulated by consensus in accordance with prescribed procedures to provide rules, guidelines or characteristics for various activities or their results.
Commonly used and reused files.
Note 1.Standards should be based on the comprehensive results of science, technology and experience.
Note 2.The prescribed procedure refers to the standard setting procedure promulgated by the standard setting agency.
[Source. GB/T.20000.1-2014,5.3]
3.3
In order to obtain the best order for tobacco leaf production and promote common benefits, in view of the technical, management problems and potential risks existing in tobacco leaf production, the operation
Use systematic analysis methods to establish a tobacco production standard system and implement standard activities.
3.4
Tobacco leaf production-related standards form a scientific and organic whole based on their internal connections.
3.5
Standardized technical or management elements are required in tobacco leaf production.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YC/T 237-2023_English be delivered?Answer: Upon your order, we will start to translate YC/T 237-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of YC/T 237-2023_English with my colleagues?Answer: Yes. The purchased PDF of YC/T 237-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version YC/T 237-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YC/T 237-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|