| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 1588.9-2007 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Rules for the inspection of lighting equipment for import and export. Part 9: Starter for fluorescent lamps
| Obsolete |
SN/T 1588.9-2007
|
PDF similar to SN/T 1588.9-2007
Basic data | Standard ID | SN/T 1588.9-2007 (SN/T1588.9-2007) | | Description (Translated English) | Rules for the inspection of lighting equipment for import and export. Part 9: Starter for fluorescent lamps | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | K74 | | Classification of International Standard | 29.140 | | Word Count Estimation | 8,821 | | Date of Issue | 2007-08-06 | | Date of Implementation | 2008-03-01 | | Older Standard (superseded by this standard) | SN/T 0618-1996 | | Quoted Standard | GB/T 2828.1-2003; IEC 60155-1993 | | Regulation (derived from) | Accredidation-Technology-Letter [2015] No. 247 | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the import and export requirements for fluorescent lamps starter, sampling, inspection and test results to determine. This standard applies to preheat fluorescent glow starter can be replaced. | SN/T 1588.9-2007: Rules for the inspection of lighting equipment for import and export. Part 9: Starter for fluorescent lamps
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of lighting equipment for import and export.Part 9. Starter for fluorescent lamps
Book of the People's Republic of China Entry and Exit Inspection and Quarantine
Replace SN/T 0618-1996
Import and export luminaire inspection procedures
Part 9. Starters for fluorescent lamps
Released on.2007-08-06
2008-03-01 implementation
People's Republic
The General Administration of Quality Supervision, Inspection and Quarantine issued
Foreword
SN/T 1588 "Import and Export Lamp Inspection Regulations" is divided into 9 parts.
---Part 1. Thermal test light source for luminaire heating test;
--- Part 2. General requirements;
--- Part 3. Special requirements for lamps for swimming pools and similar places;
--- Part 4. Festival lighting;
--- Part 5. Double-ended fluorescent lamps;
--- Part 6. Incandescent lamps for general lighting in homes and similar places;
--- Part 7. bayonet lamp holder;
---Part 8. Ballasts for tubular fluorescent lamps;
--- Part 9. Starter for fluorescent lamps.
This part of SN/T 1588 is the ninth part of the "Import and Export Lamp Inspection Regulations".
This part replaces SN/T 0618-1996 "Export Fluorescent Lamp Starter Inspection Procedures".
The main changes in this section compared with SN/T 0618-1996 are as follows.
--- The standard name and scope of application have been greatly modified;
--- Prepare inspection procedures in accordance with the framework specified in SN/T 0002-2004;
--- Increased the general requirements of the inspection procedures;
--- Increased inspection supervision mode.
This part is proposed and managed by the National Certification and Accreditation Administration.
This section drafted by. Xiamen Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China.
The main drafters of this section. Su Zhijian, Yan Weimin, Li Shengjie, Zhong Hairu.
The previous versions of the standards replaced by this section are.
---SN/T 0618-1996.
Introduction
"Import and export luminaire inspection procedures - Part 9. Starters for fluorescent lamps" is the basis for the inspection of the starter for import and export fluorescent lamps.
Import and export fluorescent lamps use the starter inspection to guide and standardize.
With the amendment of China’s accession to the World Trade Organization (WTO) and the "Import and Export Commodity Inspection Law of the People's Republic of China", import and export commodity inspection
The inspection work pattern has undergone great changes. In order to adapt to the situation and changes, the national inspection and quarantine authorities have established inspection and quarantine standards.
system.
This part belongs to the fourth layer of the inspection and quarantine standard system---personality standard, which is designed for the characteristics of the starter for fluorescent lamps.
Special requirements for inspection of light lamps with starters.
Import and export luminaire inspection procedures
Part 9. Starters for fluorescent lamps
1 Scope
This part of SN/T 1588 specifies the requirements, sampling, inspection and test results of the starter for fluorescent lamps for import and export.
This section applies to replaceable glow starters for preheated fluorescent lamps.
2 Normative references
The provisions in the following documents become the provisions of this part by reference to this part of SN/T 1588. Quotations with dated
, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section
The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this
section.
GB/T 2828.1-2003 - Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch inspections by Retrieving Quality of Acceptance (AQL)
Plan (ISO 2859-1.1999, IDT)
IEC 60155.1993 Starter for fluorescent lamps
3 Terms and definitions
The following terms and definitions apply to this section.
3.1
According to the mandatory requirements of the national technical specifications, the type test shall be carried out according to the prescribed period, and the products shall be subjected to batch inspection according to the on-site inspection regulations.
Inspection and implementation of the conformity assessment activities of the company's quality management system.
3.2
According to the mandatory requirements of the national technical specifications, the import and export commodities shall be subject to the conformity assessment activities of sampling, inspection and inspection batch by batch or batch.
3.3
The same specifications, models, and unit products produced under the same production conditions for the purpose of inspection are referred to as batches.
4 General requirements
4.1 General requirements
Fluorescent starters are constructed and designed so that they are not hazardous to the user and the surrounding environment under normal conditions of use.
4.2 Safety requirements
The general safety requirements for starters for fluorescent lamps shall be in accordance with IEC 60155.1993 and shall be considered for use in the country (region) where applicable.
difference.
4.3 Other requirements
When applicable, consideration should also be given to the environmental protection, energy efficiency, performance, etc. of the fluorescent lamp starter in accordance with the relevant national (regional) technical regulations.
Provisions.
|