| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 1588.7-2007 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Rules for the inspection of lighting equipment for import and export. Part 7: Bayonet lampholds
| Obsolete |
SN/T 1588.7-2007
|
PDF similar to SN/T 1588.7-2007
Basic data | Standard ID | SN/T 1588.7-2007 (SN/T1588.7-2007) | | Description (Translated English) | Rules for the inspection of lighting equipment for import and export. Part 7: Bayonet lampholds | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | K74 | | Classification of International Standard | 29.140.10 | | Word Count Estimation | 8,866 | | Date of Issue | 2007-08-06 | | Date of Implementation | 2008-03-01 | | Quoted Standard | GB/T 1483.6; GB/T 2828.1-2003; GB 17936-1999; GB 19148.5; SN/T 0002 | | Regulation (derived from) | Accredidation-Technology-Letter [2015] No. 247 | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the requirements for import and export bayonet, inspection and judgment. This standard applies to the lamp and semi-lamps connected to a rated voltage of 250V power supply voltage on the B15d and B22d bayonet import and export inspection. This section also applies to fully or partially lamps became one of the lamp, or installed in the device according to the requirements of the import and export inspection lamp. | SN/T 1588.7-2007: Rules for the inspection of lighting equipment for import and export. Part 7: Bayonet lampholds
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of lighting equipment for import and export.Part 7. Bayonet lampholds
Exit inspection and quarantine industry standard book People's Republic of China
Inspection of import and export lamps
Part 7. Cartridges bayonet
Posted 2007-08-06
2008-03-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
SN/T 1588 "Importers lighting for the inspection" is divided into nine sections.
--- Part 1. heat lamps heat test test light source;
--- Part 2. General requirements;
--- Part 3. Particular requirements for swimming pools and similar lamps used;
--- Part 4. festive lighting;
--- Part 5. double capped fluorescent lamps;
--- Part 6. domestic and similar general lighting incandescent;
--- Part 7. Cartridges bayonet;
--- Part 8. ballasts for fluorescent lamps;
--- Part 9. fluorescent starter.
SN/T 1588 This section of the "import and export inspection of lamps" Part 7.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section was drafted by. People's Republic of China Fujian Exit Inspection and Quarantine.
The main drafters of this section. Lin Miao, XING Jian-min, Huang Huihua, Guo Yan.
This section first release of exit inspection and quarantine industry standards.
Introduction
"Inspection of import and export lamps - Part 7. Cartridges bayonet" import and export Cartridges bayonet inspection work in accordance with the import and export bayonet lamp
Seat inspection play a guiding and regulating.
With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection
Test mode has undergone great changes, and changes in order to adapt to the situation, the state department in charge of inspection and quarantine inspection and quarantine standards organization established
system.
This part belongs to the standard system of inspection and quarantine fourth floor --- personality standard specifies Importers Cartridges bayonet inspection requirements.
Inspection of import and export lamps
Part 7. Cartridges bayonet
1 Scope
SN/T 1588 provisions of this part of the import and export Cartridges bayonet requirements, inspection and judgment.
This section applies to the lamp and the lamp connected to the half-rated voltage B15d 250V supply voltage and bayonet lampholders B22d
Import and export inspection.
This section also applies to lighting completely or partially became one of the lamp holder, lamp holder or according to requirements of equipment installed in and out
Port inspection.
2 Normative references
The following documents contain provisions which, through reference SN/T in this section 1588 constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encouraged to reach under this section
Are all aspects of research protocols to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 1483.6 Lamp caps Gauges - Part 6. Bayonet lampholders gauge (GB/T 1483.6-2003,
IEC 60061-3.2002, MOD)
GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample
Programme (ISO 2859-1.1999, IDT)
GB 17936-1999 Cartridges bayonet (idt IEC 61184.1997)
GB 19148.5 lampholder types and dimensions - Part 5. Bayonet lampholders (GB 19148.5-2003, IEC 60061-2.2002,
MOD)
The basic provisions of SN/T 0002 Electromechanical Import and Export Commodity Inspection procedures prepared
3 Terms and Definitions
GB/T 2828.1-2003, GB 17936-1999 and SN/T 0002 and established the following terms and definitions apply to this section.
3.1
According to the mandatory requirements of national technical specifications, batch import and export commodities or pumping batches embodiment qualified sampling, testing and verification determination activities.
3.2
Mandatory requirements according to national technical specifications type testing, according to the scene to examine the provisions of the product lot testing, and quality of enterprises
The amount of qualified supervision and management system implementation determination activities.
3.3
The same specifications and implementation of sampling inspection pooled under the same production conditions of production per unit of product, referred to as batch. Only differ in the details
And the same with the same structure and a base material, can be regarded as the same batch.
|