| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 1588.12-2013 | English | 479 |
Add to Cart
|
3 days [Need to translate]
|
Rules for the inspection of luminaires for import and export. Part 12: Screw lampholds
| Obsolete |
SN/T 1588.12-2013
|
PDF similar to SN/T 1588.12-2013
Basic data | Standard ID | SN/T 1588.12-2013 (SN/T1588.12-2013) | | Description (Translated English) | Rules for the inspection of luminaires for import and export. Part 12: Screw lampholds | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | K74 | | Classification of International Standard | 29.140.10 | | Word Count Estimation | 12,149 | | Older Standard (superseded by this standard) | SN/T 0767-1999 | | Quoted Standard | GB/T 1483.2; GB/T 2828.1-2012; GB 7000.1; GB 17935-2007; SN/T 0002 | | Regulation (derived from) | National quality recognition (2013) 569 | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies requirements for screw lampholders import and export inspection and judgment. This standard applies only for lights and lamps with power connector and a half when using the E14, E27 and E40 Edison screw type lampholders, E12, E26 a | SN/T 1588.12-2013: Rules for the inspection of luminaires for import and export. Part 12: Screw lampholds
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of luminaires for import and export.Part 12. Screw lampholds
People's Republic of China Entry-Exit Inspection and Quarantine Standards
Instead of the SN/T 0767-1999
Inspection of import and export lamps
Part 12. screw lampholders
Part 12. Screwlampholds
Issued on. 2013-11-06
2014-06-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
SN/T 1588 "Importers lighting for the inspection" is divided into 12 parts.
--- Part 1. heat lamps heat test test light source;
--- Part 2. General requirements;
--- Part 3. Particular requirements for swimming pools and similar lamps used;
--- Part 4. festive lighting;
--- Part 5. double capped fluorescent lamps;
--- Part 6. domestic and similar general lighting incandescent;
--- Part 7. Cartridges bayonet;
--- Part 8. ballasts for fluorescent lamps;
--- Part 9. fluorescent starter;
--- Part 10. metal halide lamp energy efficiency;
--- Part 11. Portable general purpose luminaires;
--- Part 12. screw holder.
This section SN/T 1588 Part 12.
This section drafted in accordance with GB/T 1.1-2009 given rules.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
This portion of the SN/T 1588.7-2007 "the inspection of import and export lamps - Part 7. Cartridges bayonet" together, instead of the SN/T 0767-
1999 "incandescent export base for the inspection."
This section compared with the SN/T 0767-1999, the main technical changes are as follows.
--- Name made more changes to meet the requirements of industry standard system of inspection and quarantine;
--- Scope greater changes apply only to the import and export screw lampholders, does not apply to exports of filament lamp bases;
--- Increasing the overall requirements of the inspection procedures, safety, environmental protection, energy efficiency, performance, general requirements;
--- For sampling and testing of different inspection and supervision model and make provisions were under way;
--- In the specific test items and test content, methods, focusing on safety-related requirements, and mainly based on GB 17935-
2007 (IEC 60238.2004, IDT) make specific provisions;
--- Structure, format and chapter is structured according to GB 1.1-2009 requirements were modified.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section was drafted by. People's Republic of China Fujian Exit Inspection and Quarantine.
The main drafters of this section. Lin Miao, Qiu Dongxu, Wang Yupeng, Huang Huihua.
This part of the standard replaces the previous editions are.
--- SN/T 0767-1999.
Introduction
"Inspection of import and export lamps Part 12. screw lampholders" screw lampholders import and export inspection work in accordance with the import and export screw
Lampholder tests play a guiding and regulating.
With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection
Test mode has undergone great changes, and changes in order to adapt to the situation, the national exit inspection and quarantine departments in charge of the establishment of immigration check
Inspection and quarantine industry-standard system.
This part belongs to industry-standard system of inspection and quarantine fourth floor --- personality standard specifies screw lampholders import and export inspection requirements.
Inspection of import and export lamps
Part 12. screw lampholders
1 Scope
SN/T 1588 provisions of this part of the import and export of screw lampholders requirements, testing and judgment.
This section applies to the use of the connection is for lights and lamps with half the power of E14, E27 and E40 Edison screw-type lamp holder, E12, E26
And E39 Edison screw-type lamp socket can also refer to use.
This section also applies to switch lampholders used only in the operating voltage does not exceed 250V (RMS) AC circuit.
This section also applies to the operating voltage does not exceed 25V, tandem-type screw lampholders E5 en indoor use; working voltage does not exceed
60V, connected in series within the household, E10 type screw lampholders outdoor use; and E10 type screw lampholders fitted with a separate power connection type. This
These lamp holders are not retail.
This section also applies to non-Edison screw lampholders connected in series with the power supply, for example for Christmas lighting lines holder.
This section also applies to those with complete or partial lighting became one of the lamp holder, lamp holder and those required to install the equipment within.
The lamp holder should not retail.
Note 1. This section only relates to a lamp socket requires that for other requirements, such as terminals or capped electric shock protection requirements should meet the standards related equipment, and
And it should be installed in such a lampholder suitable apparatus further tests.
This section is intended for installation in indoor, outdoor, residential lighting fixtures and lamp holder industrial lighting device, also applies to Candle holder.
Note 2. In some conditions of use special occasions, such as street lighting, ship decks, motor vehicles as well as those prone to explosion hazardous areas, you can
In using a special lamp holder structure.
This section does not apply to three lamp holder E26d.
Note 3. This section is based on the formulation of general lighting lamps corresponding parameters.
--- E14 type lamp for lamp current does not exceed the 2A;
--- E27 type lamp for a lamp current does not exceed 4A;
--- E40 type lamp for a lamp current does not exceed 16A.
Note 4. If the nominal voltage of the power supply does not exceed 130V, the maximum current E40 type lamp is 32A.
Note 5. For lampholders used in luminaires, the maximum operating temperature is given in GB 7000.1 in.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1483.2 screw lampholders gauge
GB/T 2828.1-2012 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample
plan
GB 7000.1 Luminaires - Part 1. General requirements and tests
GB 17935-2007 screw lampholders
The basic provisions of SN/T 0002 Electromechanical Import and Export Commodity Inspection procedures prepared
3 Terms and Definitions
GB/T 2828.1, GB 17935 and SN/T 0002 defined by the following terms and definitions apply to this document.
|