SN/T 1094: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 1094-2013 | English | 559 |
Add to Cart
|
3 days [Need to translate]
|
Rules for the inspection of hand-held and air-leg pneumatic rock drills for export
| Obsolete |
SN/T 1094-2013
|
| SN/T 1094-2002 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Exports of hand-held air leg rock drill inspection procedures
| Obsolete |
SN/T 1094-2002
|
PDF similar to SN/T 1094-2013
Standard similar to SN/T 1094-2013 GB 17957 JB/T 10247 JB/T 8550 Basic data | Standard ID | SN/T 1094-2013 (SN/T1094-2013) | | Description (Translated English) | Rules for the inspection of hand-held and air-leg pneumatic rock drills for export | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | J84 | | Classification of International Standard | 25.140 | | Word Count Estimation | 14,124 | | Older Standard (superseded by this standard) | SN/T 1094-2002 | | Quoted Standard | GB/T 2828.1; GB/T 5621; GB/T 5898; GB/T 6247; GB/T 6481; GB/T 15706.2; GB 17957-2005; JB/T 1590; JB/T 1674-2004; JB/T 4041; JB/T 7165; JB/T 7301-2006; JB/T 7302; JB/T 9854; JB/T 9857; SN/T 0002 | | Regulation (derived from) | National quality recognition (2013) 569 | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the export handheld, sampling, testing, and the results of air-leg rock drill judgment. This standard is applicable to the export inspection export handheld, air-leg rock drill. | SN/T 1094-2013: Rules for the inspection of hand-held and air-leg pneumatic rock drills for export
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of hand-held and air-leg pneumatic rock drills for export
People's Republic of China Entry-Exit Inspection and Quarantine Standards
Instead of the SN/T 1094-2002
Export handheld, air-leg rock drill test procedures
Issued on. 2013-11-06
2014-06-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Instead of the standard SN/T 1094-2002 "export handheld, air-leg rock drill for the inspection."
This standard compared with SN/T 1094-2002, the main technical changes are as follows.
--- Amendments to the normative references;
--- Added some terms and definitions;
--- Increasing the general requirements in Chapter 4;
--- Taking into account the actual situation of inspection and supervision work for the test mode and test methods were adjusted and modified;
--- The inspection of the project, the content and requirements of the adjustments and additions.
Some elements of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China Zhejiang Exit Inspection and Quarantine.
Drafters of this standard. Wu Zhiming, Xu unloading south.
This standard replaces the standards previously issued as follows.
--- SN/T 1094-2002.
Introduction
"Export handheld, air-leg rock drill test procedures" export hand-held, air-leg rock drill products inspection work based on the
Handheld mouth, air-leg rock drill testing products play a guiding and regulating.
With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection
Test mode has undergone great changes, the inspection and quarantine work to meet the actual needs, Inspection and Quarantine Inspection and the competent departments to establish a
Phytophthora standard system.
This standard belongs to the standard system of inspection and quarantine fourth floor --- personality standard specifies export handheld, air-leg rock drill products seized
Inspection requirements.
Export handheld, air-leg rock drill test procedures
1 Scope
This standard specifies the export handheld, sampling, testing and the results of air-leg rock drill determination.
This standard is applicable to the export inspection export handheld, air-leg rock drill.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Batch inspection sampling plan by acceptance quality limit (AQL) inspection. GB/T 2828.1 Sampling procedures for inspection - Part 1
GB/T 5621 drilling machines and pneumatic tools Performance Test Method
GB/T 5898 Hand-held non-electric power tools - Noise measurement category Engineering method (grade 2)
GB/T 6247 term drilling machines and pneumatic tools
GB/T 6481 drilling with a hollow hexagonal drill rod connected vertebrae
GB/T 15706.2 Safety of machinery - Basic concepts, general principles for design - Part 2. Technical principles
GB 17957-2005 drilling machines and pneumatic tools - Safety requirements
JB/T 1590 drilling machines and pneumatic tools Model methodology
JB/T 1674-2004 Air-leg rock drill
JB/T 4041 drilling machines and pneumatic tools product cleanliness generic detection method
JB/T 7165 drilling machines and pneumatic tools assembly general technical conditions
JB/T 7301-2006 jackhammer
JB/T 7302 drilling machines and pneumatic tools products packaging technology
JB/T 9854 gas leg
JB/T 9857 drilling machines and pneumatic tools paint general technical conditions
The basic provisions of SN/T 0002 inspection of import and export of electromechanical products prepared
3 Terms and Definitions
GB 17957, GB/T 6247 and SN/T 0002 defined by the following terms and definitions apply to this document.
3.1
Rock drill rockdrils
Impact and rotary machine having a mechanism used to drill holes in rock.
3.2
Jackhammer hand-heldpneumaticrockdrils
Held by hand, or by the weight of the rock drill thrust force applied by the operator of the rock drilling machine.
3.3
Air-leg rock drill air-legpneumaticrockdrils
Gas leg rest, advancing rock drill.
|