|
US$649.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
RB/T 144-2018: Guidance of technical competence assessment for testing body in building materials field
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| RB/T 144-2018 | English | 649 |
Add to Cart
|
5 days [Need to translate]
|
Guidance of technical competence assessment for testing body in building materials field
| Valid |
RB/T 144-2018
|
PDF similar to RB/T 144-2018
Basic data | Standard ID | RB/T 144-2018 (RB/T144-2018) | | Description (Translated English) | Guidance of technical competence assessment for testing body in building materials field | | Sector / Industry | Chinese Industry Standard (Recommended) | | Classification of Chinese Standard | A00 | | Word Count Estimation | 28,230 | | Date of Issue | 2018-06-04 | | Date of Implementation | 2018-12-01 | | Regulation (derived from) | National Certification Section (2018) No. 31 | | Issuing agency(ies) | National Certification and Accreditation Administration | RB/T 144-2018: Guidance of technical competence assessment for testing body in building materials field
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Guidance of technical competence assessment for testing body in building materials field
ICS 03.120.20
A00
The People's Republic of China Certification and Accreditation Industry Standard
Guidelines for the Evaluation of Technical Ability of Testing Institutions in the Building Materials Field
2018-06-04 released
2018-12-01 implementation
Issued by China National Certification and Accreditation Administration Commission
Table of contents
Foreword Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Evaluation Principle 1
5 Evaluation method 2
6 Evaluation organization 2
7 Review content 2
Appendix A (normative appendix) Common material testing technology capability evaluation focus points in the field of building materials 4
Appendix B (Normative appendix) Some materials hazardous substance detection technology capability evaluation focus points 22
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed and managed by the National Certification and Accreditation Administration Committee.
Drafting organizations of this standard. China National Accreditation Center for Conformity Assessment, China Academy of Building Research, Shanghai Academy of Building Research (collectively
Group) Co., Ltd., School of Materials Science and Engineering, Tongji University, Beijing Institute of Construction Engineering Co., Ltd., Jiangsu Transportation Research Institute
Research Institute Co., Ltd., Shenzhen Academy of Building Research Co., Ltd.
The main drafters of this standard. Wang Guohua, Geng Lei, Dou Weiwei, Xu Yan, Sun Jian, Guan Shujun, Yang Bo, Zhu Jiqian, Xu Hong, Liu Ke, Ren Jun,
Guo Xiaoqing and Li Wenting.
Introduction
The purpose of this standard is to guide the evaluation of the technical capabilities of testing institutions in the field of building materials, standardize the evaluation process, and ensure the fairness and accuracy of the evaluation results
Improve the efficiency of evaluation work at the same time.
This standard is based on GB/T 27025 and related testing standards, combined with the actual evaluation of the technical capabilities of testing institutions in the building materials field.
The refinement of related work. This standard mainly includes cementitious materials, concrete and mortar materials, metal materials, masonry materials, waterproof materials,
Decoration materials, bonding and sealing materials, thermal insulation systems and materials, pipe network materials, wooden materials, curtain wall doors and windows and materials, concrete products, anti-corrosion materials,
The focus of technical capability evaluation of geotechnical materials, traffic highway materials, and materials for hazardous substances. Concerns about the evaluation of technical capabilities of other building materials
You can also refer to the relevant requirements of this standard.
This standard is not to be used as a basis for independent judgment of whether the testing organization meets the requirements of relevant laws, regulations and standards.
Guidelines for the Evaluation of Technical Ability of Testing Institutions in the Building Materials Field
1 Scope
This standard provides guidelines for the evaluation principles, evaluation methods, evaluation organization and evaluation content of the technical capabilities of testing institutions in the field of building materials.
This standard applies to the evaluation of the technical capabilities of testing institutions in the field of building materials.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 606 General method for moisture determination of chemical reagents Karl Fischer method
GB/T 2793 Determination of non-volatile content of adhesives
GB/T 3186 Sampling of paints, varnishes and raw materials for paints and varnishes
GB/T 4615 Determination of Residual Vinyl Chloride Monomer in Polyvinyl Chloride Gas Chromatography
GB/T 6750 Determination of the density of paints and varnishes-Pycnometer method
GB/T 6751 Determination of volatile and non-volatile matter in paints and varnishes
GB/T 11835 Rock wool, slag wool and their products for thermal insulation
GB/T 13350 Glass wool and its products for thermal insulation
GB/T 13354 Liquid Adhesive Density Determination Method Gravimetric Cup Method
GB/T 17657 Test method for physical and chemical properties of wood-based panels and facing wood-based panels
GB/T 17795 Glass wool products for building thermal insulation
GB 18580 The limit of formaldehyde emission in wood-based panels and products for indoor decoration and refurbishment materials
GB 18583-2008 Limits of harmful substances in adhesives for interior decoration materials
GB/T 19686 Rock wool insulation products for construction
GB/T 27025 General requirements for the competence of testing and calibration laboratories
3 Terms and definitions
The terms and definitions defined in GB/T 27025 apply to this document.
4 Evaluation principles
4.1 Pay attention to the resource allocation of testing agencies
Pay attention to the allocation of resources such as personnel, equipment, standards, environment, and information management system required for testing capabilities.
4.2 Pay attention to special testing items
Distinguish the technical characteristics of different building materials testing, and pay attention to the higher-risk testing items.
4.3 Pay attention to actual operation ability
Pay attention to the compliance and proficiency of the inspection personnel's actual operation with the standard prescribed methods.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of RB/T 144-2018_English be delivered?Answer: Upon your order, we will start to translate RB/T 144-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of RB/T 144-2018_English with my colleagues?Answer: Yes. The purchased PDF of RB/T 144-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|