|
US$1429.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
RB/T 059-2020: Technical specifications for application assessment of anchor channels system
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| RB/T 059-2020 | English | 1429 |
Add to Cart
|
8 days [Need to translate]
|
Technical specifications for application assessment of anchor channels system
| Valid |
RB/T 059-2020
|
PDF similar to RB/T 059-2020
Basic data | Standard ID | RB/T 059-2020 (RB/T059-2020) | | Description (Translated English) | Technical specifications for application assessment of anchor channels system | | Sector / Industry | Chinese Industry Standard (Recommended) | | Classification of Chinese Standard | A00 | | Classification of International Standard | 03.120.20 | | Word Count Estimation | 62,684 | | Date of Issue | 2020-08-26 | | Date of Implementation | 2020-12-01 | | Regulation (derived from) | National Certification and Accreditation Administration Announcement No. 21 of 2020 | | Issuing agency(ies) | National Certification and Accreditation Administration | RB/T 059-2020: Technical specifications for application assessment of anchor channels system---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Technical Specification for Application Evaluation of Trough Embedded Parts System)
ICS 03:120:20
A00
The People's Republic of China Certification and Accreditation Industry Standard
Technical Specification for Application Evaluation of Trough Embedded Parts System
2020-08-26 released
2020-12-01 implementation
Issued by the National Certification and Accreditation Administration Commission
Table of contents
Foreword Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Evaluation object 4
4:1 Channel 4
4:2 Anchor 5
4:3 T-bolt pair 5
4:4 Trough embedded parts 5
5 Evaluation of applicable environment and conditions 5
5:1 Evaluation of applicable environment 5
5:2 Evaluation applicable conditions 6
6 Review content 8
6:1 Channel 8
6:2 Anchor 8
6:3 T-bolt pair 9
6:4 Trough Embedded Parts System 9
7 Evaluation method 10
7:1 General provisions 10
7:2 Static load bearing performance of the channel 13
7:3 Static load bearing performance of anchors 15
7:4 Static load bearing performance of T-bolt pairs 15
7:5 Static load bearing performance, normal service limit displacement, fire resistance and fatigue performance of the trough embedded part system 17
8 evaluation results 24
Appendix A (informative appendix) Slot type embedded part system design data sheet 25
Appendix B (informative appendix) Failure form of trough embedded part system 29
Appendix C (Normative Appendix) Performance Test Method of Trough Embedded Parts System 31
Appendix D (informative appendix) System evaluation report template for trough embedded parts 50
Appendix E (informative appendix) Test report template for trough embedded parts system 52
Reference 57
Foreword
This standard was drafted in accordance with the rules given in GB/T 1:1-2009:
This standard was proposed and managed by the National Certification and Accreditation Administration Committee:
Drafting organizations of this standard: China Academy of Building Research Co:, Ltd:, China Railway Second Academy Engineering Group Co:, Ltd:, Guangzhou Metro Design
Research Institute Co:, Ltd:, Beijing Urban Construction Design and Development Group Co:, Ltd:, HALFEN (Beijing) Construction Accessories Sales Co:, Ltd:, Xili
DE (Shanghai) Co:, Ltd:, Sinopec Jiang Diamond Oil Machinery Co:, Ltd:, China Railway Longchang Railway Equipment Co:, Ltd:, Jiangsu Construction Engineering Quality
Testing Center, Shandong Antaike Engineering Materials Co:, Ltd:, Guangdong Jianlang Hardware Products Co:, Ltd:, GEODIS (Beijing) Construction Technology Co:, Ltd:,
Fischer (Taicang) Building Anchor Co:, Ltd:, Jiangsu Huatong New Energy Technology Co:, Ltd:, Henan Dasen Mechanical and Electrical Co:, Ltd:, Hebei Yixin
Fastener Co:, Ltd:, Fasda (Dalian) Industrial Group Co:, Ltd:, Shandong Lanqiao Engineering Materials Co:, Ltd:, Xi'an Huaqiang Engineering Materials Co:, Ltd:
Co:, Ltd:, Shengnian Technology Co:, Ltd:, Shanghai Dingrui Steel Engineering Technology Co:, Ltd:, Wuhan Institute of Material Protection:
The main drafters of this standard: Tong Xiaochao, Chang Wenfang, Wang Jingtao, Zhang Yi, Ding Xianli, Guo Jianfeng, Li Yapeng, Huang Longfei, Xing Weiling, Zhang Liehua,
She Yunjiu, Zhang Dong, Liu Ke, Li Tianyan, Xu Gongke, Shen Wenzhou, Mi Jing, Sun Dongning, Qian Jiawei, Zuo Chenglong, Yin Linjie, Hao Yi, Liu Pingyuan, Li Chunxiao,
Li Benfa, Xie Jiaming, Lai Zhiyong, Wang Bo, Wang Zixiao, Chen Shubing, Wanqiao:
Introduction
In recent years, with the continuous improvement of the degree of industrialization in the field of construction engineering, trough embedded parts systems have been used in construction, rail transit, urban pipe corridors, etc:
The infrastructure field is gradually adopted, and the stakeholders of the construction project pay more attention to the application performance of the trough embedded part system: In order to satisfy the construction
This standard is formulated in the design project for the quality and technical guarantee requirements of the trough embedded parts system and promote the development of international trade:
The trough embedded part system is different from standardized products in the traditional sense, and its performance is not only determined by the trough embedded part product itself, because
Therefore, there is a need to evaluate the system performance through certification in the project: European and American certification and evaluation agencies have formulated system evaluation of trough embedded parts
Standards are used to guide certification work: According to the technical characteristics of the channel embedded part system in different construction engineering fields, this standard mainly stipulates
The evaluation technology methods generally applicable to the system are presented: At the same time, the design, production, and inspection of the grooved embedded parts system can be used as reference:
This standard is included in the third topic "Architecture" in the:2016 13th Five-Year National Key Research and Development Program "Key Technologies for Industrial Building Inspection and Evaluation":
On the basis of the research on the quality certification and certification technology system of parts and components, refer to the certification and accreditation industry standard ``Prefabricated building parts and
The classification of "General Specification for Component Certification" is based on a specific application product, namely the trough embedded part system, to conduct research and compile this standard:
Technical Specification for Application Evaluation of Trough Embedded Parts System
1 Scope
This standard specifies the objects, applicable conditions, content, methods and results of the application evaluation of the trough embedded parts system:
This standard is applicable to the evaluation of static load bearing performance, normal service limit displacement, fire resistance and fatigue performance of trough embedded parts system:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 197 Common thread tolerance
GB/T 3098:1 Mechanical properties of fasteners bolts, screws and studs
GB/T 3098:2 Mechanical properties of fasteners nuts
GB/T 3098:6 Mechanical properties of fasteners stainless steel bolts, screws and studs
GB/T 3098:15 Mechanical properties of fasteners stainless steel nuts
GB/T 3103:1 Fastener tolerance bolts, screws, studs and nuts
GB/T 19292:1 Corrosion of metals and alloys: Atmospheric corrosivity Part 1: Classification, determination and evaluation
GB/T 50081 Standard Test Method for Physical and Mechanical Properties of Concrete
GB/T 50107 Concrete Strength Inspection and Evaluation Standard
GB 50661 Specification for Welding of Steel Structures
3 Terms and definitions
The following terms and definitions apply to this document:
3:1
Slot embedded part anchorchannel
A steel fitting composed of a channel, a T-bolt pair and at least two anchors is shown in Figure 1:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of RB/T 059-2020_English be delivered?Answer: Upon your order, we will start to translate RB/T 059-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of RB/T 059-2020_English with my colleagues?Answer: Yes. The purchased PDF of RB/T 059-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|