|
US$499.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 1961-2011: Technical regulation for controlling Anoplophora glabripennis (Motsch.)
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| LY/T 1961-2011 | English | 499 |
Add to Cart
|
4 days [Need to translate]
|
Technical regulation for controlling Anoplophora glabripennis (Motsch.)
| Valid |
LY/T 1961-2011
|
PDF similar to LY/T 1961-2011
Basic data | Standard ID | LY/T 1961-2011 (LY/T1961-2011) | | Description (Translated English) | Technical regulation for controlling Anoplophora glabripennis (Motsch.) | | Sector / Industry | Forestry Industry Standard (Recommended) | | Classification of Chinese Standard | B16 | | Classification of International Standard | 65.020.30 | | Word Count Estimation | 19,124 | | Date of Issue | 2011-06-10 | | Date of Implementation | 2011-07-01 | | Quoted Standard | GB 5452; GB 12475; LY/T 1681 | | Regulation (derived from) | State Forestry Administration in 2011 Notice No. 9 | | Issuing agency(ies) | State Forestry Administration | | Summary | This standard specifies glabripennis [Anoplophora glabripennis (Motsch.), also known as Anoplophora nobilis Anoplophoranobilis Ganglbauer, hereinafter referred to as beetles ] control strategies, insect monitoring, control technology, control effect inspection. This standard applies to our range of Anoplophora glabripennis comprehensive treatment, prevention and treatment of other Boring beetles may refer to this class. | LY/T 1961-2011: Technical regulation for controlling Anoplophora glabripennis (Motsch.)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical regulation for controlling Anoplophora glabripennis (Motsch.)
ICS 65.020.30
B16
People's Republic of China Forestry Industry Standard
Technical regulations for the prevention and control of A. glabrata
Published on.2011-06-10
2011-07-01 implementation
State Forestry Administration released
Content
Foreword I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Prevention Strategy 2
5 insect monitoring 3
6 Prevention and control technology 3
7 Control effect check 5
Appendix A (informative) Tree species configuration technology 7
Appendix B (informative appendix) Flocking Technique 8
Appendix C (informative appendix) Pest wood fumigation treatment technology 10
Appendix D (informative) Tree hole punching and injection technology 12
Appendix E (informative) Spray, plug (fill) hole agent and reference dosage 13
Appendix F (informative) Bird Nesting and Hanging Technology 14
Reference 15
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents.
This standard is under the jurisdiction of the State Forestry Administration's Forestry Pest Control Standardization Committee.
This standard was drafted. Forest Disease and Pest Control Station of the State Forestry Administration, Forest Disease and Pest Control Station of Ningxia Hui Autonomous Region, Inner Mongolia
Autonomous Region Forest Pest Control and Quarantine Station, Dingxi City Forestry Bureau of Gansu Province.
The main drafters of this standard. Qu Tao, Qiu Lixin, Cao Chuanjian, Zhao Shengguo, Chai Shouquan, Cui Zhenqiang, Yu Haiying, Lin Xiao, Zhao Qing, Wang Zhiyong.
Technical regulations for the prevention and control of A. glabrata
1 Scope
This standard stipulates Anoplophoraglabripennis (Motsch.), also known as Anoplophora
nobilisGanglbauer, hereinafter referred to as Tianniu] control strategy, pest monitoring, prevention and control technology, prevention and treatment effects inspection.
This standard is applicable to the comprehensive management of A. glabrata in China, and the prevention and control of other dry-type Tianniu can be implemented.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB 5452 56% aluminum phosphide tablets
GB 12475 Anti-virus procedures for storage, transportation and use of pesticides
LY/T 1681 Forest pest occurrence and disaster criteria
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Standard sampleplot
In order to investigate the occurrence and control effect of the Tianniu, human factors determine the typical plots that are expected to represent the total forest stand. Temporary standard
Both land and permanent standards. The former is a non-fixed standard site temporarily set during the investigation, and the latter is used for fixed-standard sites for long-term and regular monitoring.
3.2
Insect strain rate attackingrate
The number of insects accounted for the percentage of the total number of plants actually investigated.
3.3
Insect density density populationdensity
On average, each host tree has the number of beetle larvae. In the field investigation, it can be calculated according to the fresh manure hole of the larva of the beetle.
3.4
Target tree speciestrees
Also known as the main plant species, it is the main tree species planted by forest managers to achieve the expected benefits or goals.
3.5
Bait tree species attractivetrees
The beetle is fond of eating and has a strong attraction to the beetle. It is used to trap and concentrate on the control of the beetle to reduce the damage of the beetle to the target tree species.
3.6
Host tree species hosttrees
The beetle feeds and can breed offspring and species that can cause harm.
3.7
Non-host tree species non-hosttrees
A tree that does not feed or feed but does not breed offspring and does not cause harm.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1961-2011_English be delivered?Answer: Upon your order, we will start to translate LY/T 1961-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of LY/T 1961-2011_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1961-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|