|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
HYT0300-2021: Code of practice for subsurface buoy observation
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| HY/T 0300-2021 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Code of practice for subsurface buoy observation
| Valid |
HY/T 0300-2021
|
Standard similar to HYT0300-2021 HY/T 0357 HY/T 0294 HY/T 0290 Basic data | Standard ID | HY/T 0300-2021 (HY/T0300-2021) | | Description (Translated English) | Code of practice for subsurface buoy observation | | Sector / Industry | Marine Industry Standard (Recommended) | | Classification of Chinese Standard | N92 | | Word Count Estimation | 12,198 | | Issuing agency(ies) | Ministry of Natural Resources of the People's Republic of China | HYT0300-2021: Code of practice for subsurface buoy observation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Code of practice for subsurface buoy observation
ICS 07.060
N92
Marine Industry Standard of the People's Republic of China
Technical Regulations for Latent Target Observation
Released on 2021-02-09
2021-06-01 implementation
Issued by the Ministry of Natural Resources of the People's Republic of China
Table of contents
Foreword Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 General requirements 1
5 Deployment 2
6 Recycling 4
7 Maintenance 5
8 Report preparation and data transfer 5
Appendix A (informative appendix) Latent Mark Placement Record Form 7
Appendix B (informative appendix) Submersible standard instrument record table 8
Appendix C (Informative Appendix) Latent Standard Recovery Record Form 9
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the Ministry of Natural Resources of the People's Republic of China.
This standard is under the jurisdiction of the National Marine Standardization Technical Committee (SAC/TC283).
This standard was drafted. South China Sea Survey Technology Center of State Oceanic Administration, South China Sea Buoy Center of State Oceanic Administration.
The main drafters of this standard. Liu Tongmu, Liu Yuqiang, Lin Guanying, Zhou Baocheng, Huang Hua, Wang Yan, Zhang Xinwen, Wang Rongcan, Huang Yuhuan.
Technical Regulations for Latent Target Observation
1 Scope
This standard establishes the marine submarine standard observation procedure, and specifies the stages of deployment, recovery, maintenance, voyage report writing, and data submission.
Operation instructions describe the traceability methods such as process records and markings.
This standard applies to the operation of marine submersible targets. Special-purpose submersible targets and submersible targets operating on lakes and rivers can be implemented by reference.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 14914.1-2018 Ocean Observation Specification Part 1.General
HY/T 008-1992 Marine instrument terminology
HY/T 092-2015 Marine real-time transmission submarine standard system
3 Terms and definitions
The following terms and definitions defined in HY/T 008-1992 and HY/T 092-2015 apply to this document.
3.1
Subsurfacebuoy
The main floating body is located in the ocean observation system at a certain depth below the sea surface.
4 General requirements
4.1 Requirements for the job implementation plan
The implementation plan should be formulated and approved before the deployment and recovery of the potential mark, and its contents include.
a) Task name, purpose and requirements;
b) Place the recycling location (latitude and longitude, water depth, bottom quality, etc.);
c) Work boat and work schedule;
d) The task division and requirements of the deployment and recycling process;
e) Safety measures and emergency treatment methods;
f) Material guarantee conditions and measures required to complete the task;
g) Operation methods, methods and steps;
h) List of items going to sea, etc.
4.2 Requirements for work boats
The submersible standard work boat should meet the following requirements.
a) Hoisting equipment with a lifting load not less than 3t, a boom extending overboard not less than 3m, and a lifting height not less than 3m;
b) The minimum sailing speed should not be greater than 50cm/s;
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of HYT0300-2021_English be delivered?Answer: Upon your order, we will start to translate HYT0300-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of HYT0300-2021_English with my colleagues?Answer: Yes. The purchased PDF of HYT0300-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|