HJ 573-2010 (HJ573-2010)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
HJ 573-2010	English	209	Add to Cart	3 days [Need to translate]	Technical requirement for enviromental labeling products. Ink-jet cartridge	HJ 573-2010	Valid	HJ 573-2010

HJ 573-2010
Technical requirement for enviromental labeling products.Ink-jet cartridge
National Environmental Protection Standard of the People's Republic
Environmental Labeling Product Technical Requirements
Technical requirement for environmental labeling products
-Ink-jet cartridge
Published on.2010-05-04
2010-07-01 Implementation
Ministry of Environmental Protection released
Foreword
To implement the "Environmental Protection Law of the People's Republic of China" and the "Circular Economy Promotion Law of the People's Republic of China"
This standard is formulated for the impact on human health and the environment during use and disposal, and the promotion of the use of environmentally friendly products.
This standard sets forth requirements for toxic and hazardous substances in the inkjet cartridge and environmental design, recycling and reuse, and public information.
This standard refers to the standard of the "Environmental Mark Type No. 142" "Ink Cartridge Version 1.0.2008" of the Environmental Labeling Bureau of the Japan Environmental Association.
Order.
This standard applies to China Environmental Labeling Product Certification.
This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection.
This standard is mainly drafted by. Environmental Protection Center of the Ministry of Environmental Protection, National Office Equipment and Consumables Quality Supervision and Inspection Center, Zhuhaitian
Weifei Ma Printing Supplies Co., Ltd., China Hewlett-Packard Co., Ltd., Canon (China) Co., Ltd., Epson (China) Co., Ltd., Rui
Slim International Technology Co., Ltd., Ricoh Co., Ltd., Brother (China) Commercial Co., Ltd., Zhuhai Nasida Enterprise Management Co., Ltd.
the company.
This standard was approved by the Ministry of Environmental Protection on May 4,.2010.
This standard has been implemented since July 1,.2010.
This standard is explained by the Ministry of Environmental Protection.
Environmental Labeling Product Technical Requirements
1 Scope of application
This standard specifies the terms and definitions, basic requirements, technical contents and inspection methods of inkjet cartridge environmental labeling products.
This standard applies to inkjet cartridges using inkjet imaging technology equipment, including new inkjet cartridges and remanufactured inkjet cartridges.
This standard does not apply to inkjet inkjet equipment used for continuous printing speeds greater than 60 pages/min and printing speeds greater than 70 pages/min.
box.
2 Normative references
The contents of this standard refer to the terms in the following documents. For undated references, the valid version applies to this standard.
GB 18455 packaging recycling mark
GB/T 16288 logo for plastic products
GB/T 20861-2007 Waste product recycling terminology
HJ 567 environmental labeling product technical requirements inkjet ink
HJ/T 424-2008 Environmental Labeling Products Technical Requirements Digital Multifunction Copying Equipment
SJ/T 11363 Limitation requirements for toxic and hazardous substances in electronic information products
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1
Inkjet cartridge
A component that provides ink for devices that use inkjet printing technology.
3.2
New inkjet cartridge new ink-jet cartridge
Newly manufactured inkjet cartridges from new parts or parts made of new parts and guaranteed to have the same quality as new parts.
3.3
Remanufactured ink-jet cartridge
After use, the inkjet cartridge is cleaned, repaired or replaced, reassembled, filled, etc. to restore the original function of the inkjet cartridge.
3.4
Use reuse again
The waste product or its components, components continue to be used or cleaned, repaired and continue to be used for the original purpose.
(GB/T 20861-2007)
3.5
Recycling recycling
Disposal of waste products to enable them to be reused as raw materials, but does not include the recovery and reuse of energy.
(GB/T 20861-2007)
3.6
Energy recovery
The process of recycling waste prod