HJ 570-2010 (HJ570-2010)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
HJ 570-2010	English	239	Add to Cart	3 days [Need to translate]	Technical requirement for enviromental labeling products. Toner cartridge	HJ 570-2010	Valid	HJ 570-2010

HJ 570-2010
Technical requirement for enviromental labeling products.Toner cartridge
National Environmental Protection Standard of the People's Republic
Environmental labeling product technical requirements toner cartridge
Technical requirement for environmental labeling products
-Toner cartridge
Published on.2010-05-04
2010-07-01 Implementation
Ministry of Environmental Protection released
Foreword
To implement the "Environmental Protection Law of the People's Republic of China" and the "Circular Economy Promotion Law of the People's Republic of China", reduce the production of toner cartridges,
This standard is formulated for the impact on human health and the environment during use and disposal, and the promotion of the use of environmentally friendly products.
This standard sets forth requirements for toxic and hazardous substances in the toner cartridge and environmental design, recycling and reuse, and public information.
This standard refers to the "Environmental Mark Type No.132" of the Environmental Labeling Agency of Japan Environmental Standards.
Formulated.
This standard applies to China Environmental Labeling Product Certification.
This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection.
This standard is mainly drafted by. Environmental Protection Center of the Ministry of Environmental Protection, National Office Equipment and Consumables Quality Supervision and Inspection Center, Canon (中中
China) Co., Ltd., China Hewlett-Packard Co., Ltd., Lexmark International Technology Co., Ltd., Ricoh Co., Ltd., Zhuhai Tianwei Pegasus
Printing Supplies Co., Ltd., Zhuhai Nasida Enterprise Management Co., Ltd., Brother (China) Commercial Co., Ltd., Epson (China) Co., Ltd.
Division, Fuji Xerox (China) Co., Ltd., Ri Chong Commercial (Beijing) Co., Ltd., Konica Minolta Business Technology (Wuxi) Co., Ltd.
Division, Sharp Office Equipment (Changshu) Co., Ltd.
This standard was approved by the Ministry of Environmental Protection on May 4,.2010.
This standard has been implemented since July 1,.2010.
This standard is explained by the Ministry of Environmental Protection.
Environmental labeling product technical requirements toner cartridge
1 Scope of application
This standard specifies the terms and definitions, basic requirements, technical contents and inspection methods of the toner cartridge environmental labeling products.
This standard applies to drums used in electronic imaging printing equipment, newly manufactured by new parts, or new parts and reusable parts.
Powder box.
This standard does not apply to printing media with a media size specification of A2 (594 mm × 420 mm) or larger (including A2) and
The print speed is greater than 70 (pages/min) for the toner cartridge used by the printing device.
2 Normative references
The contents of this standard refer to the terms in the following documents. For undated references, the valid version applies to this standard.
GB 18455 packaging recycling mark
GB/T 16288 logo for plastic products
GB/T 16483 chemical safety data sheet content and project sequence
GB/T 20861-2007 Waste product recycling terminology
HJ/T 424-2008 Environmental Labeling Products Technical Requirements Digital Multifunction Copying Equipment
SJ/T 11363 Limitation requirements for toxic and hazardous substances in electronic information products
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1
Toner cartridge
Used in electronic imaging printers, copiers, fax machines, and all-in-ones, from toner cartridges filled with toner or added
A product consisting of a photoconductor drum and a developing unit.
3.2
Use reuse again
The waste product or its components, components continue to be used or cleaned, repaired and continue to be used for the original purpose. (GB/T
20861-2007)
3.3
Recycling recycling
Disposal of waste products to enable them to be reused as raw materials, but does not include the recovery and reuse of energy.
(GB/T 20861-2007)
3.4
Recoverability rate
The sum of the quality of the new product that