WB/T 1120-2022 PDF English
Search result: WB/T 1120-2022 English: PDF (WB/T1120-2022)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| WB/T 1120-2022 | English | 205 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Service specification for used traction battery recycling
| Valid |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): WB/T 1120-2022 Related standards: WB/T 1120-2022
PDF Preview: WB/T 1120-2022
WB/T 1120-2022: PDF in English (WBT 1120-2022) WB/T 1120-2022
WB
LOGISTICS INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 03.080.99
CCS A 16
Service specification for used traction battery recycling
ISSUED ON: JUNE 16, 2022
IMPLEMENTED ON: JULY 01, 2022
Issued by: National Development and Reform Commission
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 5
4 Requirements for recycling party ... 6
5 Service requirements ... 8
6 Abnormality handling ... 12
7 Information feedback ... 12
8 Evaluation and improvement ... 13
Appendix A (Normative) Recycling service process ... 14
Appendix B (Informative) Recycling list ... 15
Appendix C (Normative) Complaint handling and settling rate calculation formula .. 17
Service specification for used traction battery recycling
1 Scope
This document specifies the requirements for recycling party, service requirements,
abnormality handling, information feedback, evaluation and improvement of used
traction battery recycling services.
This document applies to used lithium-ion traction battery recycling service activities.
This document does not apply to used lead-acid batteries.
2 Normative references
The following documents are normatively referenced in this document and are
indispensable for its application. For dated references, only the version corresponding
to that date is applicable to this document; for undated references, the latest version
(including all amendments) is applicable to this document.
GB 12463, General specifications for transport packages of dangerous goods
GB/T 19038, Guidelines for model and methods of customer satisfaction
measurement
GB/T 19039, General rules of customer satisfaction measurement
GB/T 19596, Terminology of electric vehicles
GB/T 33598-2017, Recycling of traction battery used in electric vehicle -
Dismantling specification
GB/T 38698.1-2020, Recycling of traction battery used in electric vehicle -
Management specification - Part 1: Packing and transporting
GB 39800.1, Specification for the provision of personal protective equipment - Part
1: General requirement
GB 50140, Code for Design of Extinguisher Distribution in Buildings
HJ 2025, Technical specifications for collection, storage, transportation of hazardous
waste
JT/T 617.4, Regulations concerning road transportation of dangerous goods - Part 4:
Provisions for the use of transport packaging
JT/T 617.5-2018, Regulations concerning road transportation of dangerous goods -
Part 5: Consignment
JT/T 617.6, Regulations concerning road transportation of dangerous goods - Part 6:
Provisions concerning the conditions of carriage, loading, unloading and handling
WB/T 1061, Management specification for waste secondary battery recycling
WB/T 1105, Technical requirements of metal logistic bin for used traction battery
3 Terms and definitions
Terms and definitions determined by GB/T 19596 and the following ones are applicable
to this document.
3.1 Traction battery
The batteries that provide energy for the power system of electric vehicles and other
equipment.
[Source: GB/T 19596-2017, 3.3.1.1.1.1, modified]
3.2 Used traction battery
The traction batteries of which the residual capacity, charge and discharge performance,
and safeguard cannot guarantee the normal operation of the original product, or traction
battery that is no longer used due to other reasons.
Note: Used traction battery includes battery pack, battery module (group) and cell.
3.3 Used traction battery recycling
The process of collection, classification, inventory, handling, packaging, loading and
unloading, transportation, storage and other activities for used traction batteries.
3.4 Recycling service
The activity where the used traction battery recycling party (referred to as “recycling
party”) carries out used traction battery recycling according to the needs of the used
traction battery provider (referred to as “provider”).
3.5 Service plan
The document formulated to regulate the used traction battery recycling service.
4.3 Facilities and equipment
4.3.1 There shall be facilities and equipment suitable for the scale of recycling services
such as testing, packaging, storage, waste liquid collection, and emergency disposal, as
well as special equipment for emergency treatment such as safety protection and rescue.
4.3.2 The recycling workplace shall be equipped with fire-fighting equipment such as
fire-fighting sandboxes, fire extinguishers, and the battery storage area shall be
provided with fire-fighting equipment that meets the requirements. The number of fire-
fighting equipment and the type of fire extinguishers shall meet the requirements of GB
50140.
4.3.3 The logistics boxes used for recycling used traction batteries shall meet the
relevant requirements of GB 12463, GB/T 38698.1-2020, and JT/T 617.4; the metal
logistics boxes shall meet the requirements of WB/T 1105.
4.4 Recycling service outlets
4.4.1 Recycling service outlets are responsible for collecting, sorting, counting, storing,
transporting and packaging used traction batteries, and shall not perform any
dismantling treatment of the collected used traction batteries other than safety
inspection.
4.4.2 Recycling service outlets shall set up schematic diagrams of operation procedure
and other guidance information, such as schematic diagrams of storage operations,
schematic diagrams of waste liquid collection and treatment operations.
4.4.3 Recycling service outlets shall record relevant information such as battery code,
type, quantity, source, and whereabouts in detail, and keep the records for three years
for future reference.
4.5 Safety and environmental protection
4.5.1 Contingency plans shall be formulated and emergency drills shall be conducted
for possible safety and environmental accidents in the various processes of used traction
battery recycling.
4.5.2 The safety and environmental protection in the recycling service process shall
meet the following requirements:
a) Used traction batteries shall not be discarded or landfilled at will;
b) Personnel responsible for safety shall pay attention to the safety status of used
traction batteries, and shall pay attention to the safety and health status of
professional service personnel;
c) The waste liquid and waste generated shall be collected and handed over to
enterprises with treatment qualifications for harmless treatment;
d) Hazardous wastes produced or included, or identified as hazardous wastes
according to the national hazardous waste identification standards and
identification methods, shall meet the relevant requirements of HJ 2025;
e) In the event of a sudden safety and environmental protection incident, the
emergency plan shall be activated immediately for rescue, the safety management
department of the recycling party shall be contacted in time, and the consignor
shall be informed.
5 Service requirements
5.1 Recycling preparation
5.1.1 Information confirmation
5.1.1.1 The provider shall provide relevant information, including but not limited to:
provider unit name, unit address, unit type (such as vehicle manufacturer, battery
manufacturer), recycling form, to-be-recycled used traction battery location, quantity,
weight, type, positive electrode material type, safety status (such as normal
decommissioned battery, accident battery), material safety data sheet (MSDS), battery
code, etc.
Note: The types of used traction battery include but are not limited to used traction
battery pack, module (group), and cell.
5.1.1.2 After receiving the recycling service information, the recycling service
personnel shall confirm the information, inform the provider of the recycling service
process specified in Appendix A, and negotiate to determine the recycling form of used
batteries. Recycling forms are divided into:
a) Door-to-door recycling, where the recycling party directly or indirectly transports
the used traction battery back from the provider;
b) Fixed-point recycling, where the provider directly or indirectly transports the used
traction battery to the location designated by the recycling party.
5.1.2 Plan formulation
The service personnel shall negotiate with the provider to determine the following
recycling service plan:
a) packaging plan;
b) loading and unloading plan;
c) handling plan;
5.2.3.1 The quantity of used traction batteries shall be counted, the quality of used
traction batteries shall be verified, and the codes of used traction batteries shall be
checked.
5.2.3.2 Recycling records shall be established in the links of packaging, loading and
unloading, storage, etc., and the recycling list shall be filled out according to the
counting results. See Appendix B for a sample of the recycling list.
5.2.4 Handling
According to the loading and unloading plan, the handling personnel and handling tools
shall be dispatched in advance; the handling personnel shall be organized to move the
used traction battery and the processing package to the designated operation area; the
following requirements shall be met during the handling.
a) Forklifts can be used to transport batteries over a short distance. Where the
distance is long or the road surface is uneven, special machinery and tools shall
be used for handling, and straps shall be used properly for fixing.
b) Batteries with safety risks shall not be transported together with other batteries.
c) A forklift should be used to move the batteries, where the batteries shall be placed
in a special container or on an insulating pallet. A dump truck or a tractor shovel
should not be used to move the batteries.
d) If hoisting is required during battery transport, non-metallic chains and ropes shall
be used to bind and lift the battery, and non-electromagnetic lifting equipment
shall be used. When mechanical lifting equipment is used for lifting bulk batteries,
the batteries shall be placed in special containers and fixed.
e) When dangerous situations such as battery smoke and fire are found during
transportation, the transportation personnel shall deal with it in time according to
the emergency plan.
f) After transporting the battery to the destination, the battery shall be placed on flat
ground.
5.2.5 Packaging
5.2.5.1 Safety judgment, safety protection and classification shall be carried out through
visual inspection before the battery is packaged.
5.2.5.2 Battery packaging shall be in accordance with the packaging requirements in
GB/T 38698.1-2020.
5.2.6 Loading and unloading
5.2.6.1 The used traction battery shall be loaded and unloaded according to the loading
and unloading plan, and the loading and unloading shall meet the requirements of JT/T
617.6.
5.2.6.2 During loading and unloading operations, check the type, specification and
quantity of used traction batteries against the waybill, and check their packaging. Used
traction batteries whose safety label, identification, mark, etc. do not match the waybill,
or whose packaging is damaged or does not comply with the provisions of GB/T
38698.1 shall not be loaded into the vehicle.
5.2.6.3 Loading and unloading operations shall not be carried out alone, but shall be
carried out under the supervision and command of the command personnel.
5.2.6.4 After loading and unloading, the working site shall be cleaned up. Residue
cleaning shall be carried out on vehicles and tools where electrolyte leakage occurs
during loading, unloading and transportation.
5.2.7 Transportation
5.2.7.1 According to the transportation plan, departure shall not be permitted unless
pictures are taken and files are kept after observing that the used traction batteries are
in good condition, the stacking method is reasonable, the transport vehicle is normal,
and the driver’s license is complete.
5.2.7.2 Transportation service personnel shall transport used traction batteries
according to the requirements in Chapter 7 of GB/T 38698.1-2020.
5.2.7.3 Vehicles that meet the driving regulations for dangerous goods transport
vehicles shall be used for transportation, and signs that meet the requirements in
Chapter 7 of JT/T 617.5-2018 shall be hung on the front, rear and both sides of the
transport vehicle.
5.2.8 Storage
5.2.8.1 The storage of used traction batteries shall be carried out according to the
storage plan, and shall comply with the storage requirements in WB/T 1061.
5.2.8.2 Used traction batteries shall be stored independently, shall not be stored together
with other goods and wastes, shall not be placed sideways or upside down, and shall
not be stacked directly.
5.2.8.3 According to the classification results of used traction batteries in 5.2.2, the used
traction batteries shall be treated accordingly, and then stored in different storage
methods and storage containers.
a) Class A used traction batteries shall be cleaned and insulated; the charged used
traction batteries that do not meet the echelon use conditions shall be discharged
first; the charged used batteries that have not been discharged shall be insulated.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|