HJ 2514-2012_English: PDF (HJ2514-2012)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| HJ 2514-2012 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Technical requirement for environmental labeling products. Vacuum cleaners
| Valid |
HJ 2514-2012
|
Standards related to: HJ 2514-2012
| Standard ID | HJ 2514-2012 (HJ2514-2012) | | Description (Translated English) | Technical requirement for environmental labeling products. Vacuum cleaners | | Sector / Industry | Environmental Protection Industry Standard | | Classification of Chinese Standard | Y62 | | Classification of International Standard | 97.080 | | Word Count Estimation | 7,779 | | Quoted Standard | GB/T 4214.2-2008; GB/T 16288; GB/T 18455; GB/T 21097.1-2007; GB/T 26572; QB 1562-1992 | | Drafting Organization | China-Japan Friendship Center for Environmental Protection | | Regulation (derived from) | Department of Environmental Protection Notice 2012 No. 25; | | Summary | This standard specifies the cleaner environmental labeling product terms and definitions, basic requirements, technical contents and test method. This standard applies to household and similar purposes by the power -driven vacuum cleaners and water suctio |
HJ 2514-2012
Technical requirement for environmental labeling products.Vacuum cleaners
National Environmental Protection Standard of the People's Republic
Technical requirements for environmental labeling products
vacuum cleaner
Technical requirement for environmental labeling products
Vacuum cleaners
Published on.2012-03-30
2012-06-01 Implementation
Ministry of Environmental Protection released
HJ □□□□-201□
Content
Foreword III
1 Scope.1
2 Normative references.1
3 Terms and Definitions 1
4 basic requirements.1
5 Technical content.1
6 Inspection method. 2
HJ □□□□-201□
Foreword
To implement the Environmental Protection Law of the People's Republic of China, reduce the impact of vacuum cleaners on the environment and human health during production and use.
Sound, protect the environment, and develop this standard.
This standard applies to the ecological design of vacuum cleaners, energy consumption, noise, use of hazardous substances in materials, packaging, identification, and public information.
Data and recycling, etc. put forward corresponding requirements.
This standard is the first release.
This standard applies to China Environmental Labeling Product Certification.
This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection.
This standard is mainly drafted by. China-Japan Friendship Environmental Protection Center.
This standard was approved by the Ministry of Environmental Protection on March 30,.2012.
This standard has been implemented since June 1,.2012.
This standard is explained by the Ministry of Environmental Protection.
HJ □□□-201□
Environmental labeling product technical requirements vacuum cleaner
1 Scope of application
This standard specifies the terms and definitions, basic requirements, technical contents and inspection methods of vacuum cleaner environmental labeling products.
This standard applies to electric vacuum cleaners and water-absorbing cleaning appliances for household and similar purposes.
2 Normative references
The contents of this standard refer to the terms in the following documents. For undated references, the valid version applies to this standard.
GB/T 4214.2-2008 Household and similar electrical appliances - Test methods for noise - Particular requirements for vacuum cleaners
GB/T 16288 logo for plastic products
GB/T 18455 packaging recycling mark
GB/T 21097.1-2007 Safety and service life of household and similar electrical appliances
GB/T 26572 Limit requirements for restricted substances in electrical and electronic products
QB 1562-1992 Vacuum cleaner
3 Terms and definitions
The following terms and definitions apply to this standard.
Vacuum cleaners
Mainly divided into vacuum cleaners and water-absorbing cleaning appliances, wherein the vacuum cleaner is driven by electric power to absorb dust,
Wire and fiber utensils. A water absorbing cleaning appliance means an appliance for absorbing an aqueous solution which may contain a foaming detergent.
4 basic requirements
4.1 Product quality and safety should meet the requirements of the corresponding product standards.
4.2 Pollutant emissions from product manufacturing enterprises shall comply with the requirements of national or local pollutant discharge standards.
4.3 Product manufacturers should strengthen clean production in the production process.
5 Technical content
5.1 Design requirements
5.1.1 The product adopts a detachable design.
5.1.2 The recycling rate of product components and materials should be at least 50% of the average quality of electrical appliances.
5.1.3 DecaBDE (DBDPO) and short chain chlorinated paraffins (SCCPs) shall not be used for plastic parts in the product.
5.1.4 The content of vinyl chloride monomer in the outer shell of the product shall not exceed 1mg/kg.
HJ □□□-201□
5.1.5 Product shell Plastic parts shall be marked in accordance with the requirements of GB/T 16288.
5.2 Production process requirements
5.2.1 The following solvents should not be used for cleaning during the production process. hydrochlorofluorocarbons (HCFCs), 1,1,1-trichloroethane (C2H3Cl3),
Trichloroethylene (C2HCl3), dichloroethane (CH3CHCl2), chloroform (CHCl3), n-hexane (C6H14), bromopropane (C3H7Br),
Toluene (C7H8), xylene (C6H4 (CH3) 2).
5.2.2 Lead-free soldering process should be used during assembly and connection of product parts.
5.3 Product requirements
5.3.1 Product inhalation efficiency should be greater than 25%.
5.3.2 Product sound power level/noise shall not exceed 76dB (A).
5.3.3 Lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium (Cr6), polybrominated biphenyls (PBBs), polybrominated diphenyl ethers in products
(PBDEs) The content of six types of hazardous substances should meet the requirements of GB/T 26572.
5.4 Product Packaging Requirements
5.4.1 The content of vinyl chloride monomer should not exceed 1mg/kg.
5.4.2 Hydrochlorofluorocarbons (HCFCs) should not be used as blowing agents.
5.4.3 It should be marked in accordance with GB/T 18455.
5.5 Product Description Requirements
The following information should be included in the product description.
(1) Replace or empty when the dust collector or dust bag is full.
(2) Turn off the power when not in use.
(3) Information on various maintenance procedures.
(4) Information on product recycling and recycling.
6 Test methods
6.1 The calculation in Technical Content 5.1.2 is carried out in accordance with the method specified in GB/T 21097.1-2007.
6.2 The calculations in Technical Content 5.3.1 are carried out in accordance with the method specified in QB 1562-1992.
6.3 The test in 5.3.2 of the technical content shall be carried out in accordance with the method specified in GB/T 4214.2-2008.
6.4 Other indicators in the technical content are verified by means of document review combined with on-site inspection.
......
|