|
US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 8167-2008: Testing method of dynamic compression for packaging cushioning materials
Status: Valid GB/T 8167: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 8167-2008 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Testing method of dynamic compression for packaging cushioning materials
| Valid |
GB/T 8167-2008
|
| GB/T 8167-1987 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Testing method of dynamic compression for package cushioning materials
| Obsolete |
GB/T 8167-1987
|
PDF similar to GB/T 8167-2008
Basic data | Standard ID | GB/T 8167-2008 (GB/T8167-2008) | | Description (Translated English) | Testing method of dynamic compression for packaging cushioning materials | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A82 | | Classification of International Standard | 55.040 | | Word Count Estimation | 9,999 | | Date of Issue | 2008-07-18 | | Date of Implementation | 2009-01-01 | | Older Standard (superseded by this standard) | GB/T 8167-1987 | | Adopted Standard | ASTM D1596-1997, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 12 of 2008 (No. 125 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the packaging with cushioning material dynamic compression test principle test methods, test equipment, test samples, test procedures and test reports. This standard applies to assessment cushioning material under impact cushioning properties and in the circulation process of the built-in product protection. This standard applies to packaging cushioning materials may be shaped blocks, plates, filamentous, grainy, and molded in the form of EPS, EPE and other soft and hard cushioning material, not for corrugated board, EPE film, metal springs and shock-proof rubber. | GB/T 8167-2008: Testing method of dynamic compression for packaging cushioning materials---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Testing method of dynamic compression for packaging cushioning materials
ICS 55.040
A82
National Standards of People's Republic of China
Replacing GB/T 8167-1987
Packaging cushioning material Dynamic Compression Test Method
Posted 2008-07-18
2009-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This revised standard adopts the American Society for Testing and Materials standard ASTMD1596-1997 "Test Method for packaging material damping properties."
This compared to a standard American Society for Testing and Materials standard ASTMD1596-1997, the main differences are as follows.
--- Revised measure the buffer material thickness compressive load capacity;
--- Modify the cushioning material measuring length, width, thickness accuracy value;
--- Expanding the application conditions test system;
--- Test method for increasing the use of compression box.
This standard replaces GB/T 8167-1987 "package cushioning material dynamic compression test method."
This standard compared with GB/T 8167-1987, the main changes are as follows.
--- Refine the test equipment for dynamic compression test requirements to be met;
--- Provides for random test sample requirements;
--- Modify the number of tests with the test sample;
--- Increasing the test sample sizes recommended;
--- Increasing the speed and height of the drop test calculation method;
--- Increasing the thickness measurements of the test requirements in the test report.
The Standard Appendix A, Appendix B is an informative annex.
This standard by the National Packaging Standardization Technical Committee (SAC/TC49) and focal points.
This standard was drafted. the machine Productivity Promotion Center, Shenzhen MYS Environmental Protection Technology Co., Ltd, China Export Commodities Packaging
graduate School.
The main drafters of this standard. yellow snow, Liu Ping, Cai Shao Ling, Li Jianhua, Zhang Jian.
This standard replaces the standards previously issued as follows.
--- GB/T 8167-1987.
Packaging cushioning material Dynamic Compression Test Method
1 Scope
This standard specifies the packaging cushioning material dynamic compression test principle test methods, test equipment, test samples, test procedures and test
Inspection reports.
This standard applies to the assessment of properties and buffer material buffer contents Product protection under the impact of a role in the distribution process.
This standard applies to the shape of the packaging with cushioning material may be massive, flaky, filamentous, granular and molded parts in the form of EPS, EPE
And other soft, hard cushion material not suitable for corrugated board, EPE film, metal springs and shock-proof rubber.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 4857.2 Basic tests for transport packages - Part 2. Temperature and humidity adjustment process (GB/T 4857.2-2005,
ISO 2233.2000, MOD)
3 Test principle
With the free fall of the hammer impact load is applied to the packaging cushioning materials, calculate the acceleration and static dynamic compressive stress determined cushioning material
Reduced performance. Test results are expressed as dynamic cushioning material compression characteristic curve.
4 Test Equipment
4.1 Testing Machine
4.1.1 The test machine shall have a free fall of the base weight and a larger mass.
4.1.2 The weight should be accompanied by an acceleration sensor.
4.1.3 The weight should have a flat and can be completely covered by the impact surface of the test sample, the quality of the hammer can be adjusted, if a plurality of weight
Mass composition, it should be fixed as a whole.
4.1.4 The weight should be hard, and has sufficient rigidity to ensure that the process does not impact due to the weight of their own vibration waveform leaving the test
distortion.
4.1.5 hammer impact test machine and the surface should be parallel to the base surface, and a predetermined speed impact test sample, impact velocity error should not exceed
± 2%. Meanwhile, the weight should be at intervals of not less than 1min continuous shock.
4.1.6 Test machine base should have sufficient rigidity, the maximum weight of the impact face shall be less than the base surface of the base quality testing machine, testing machine
At least 50 times the maximum weight quality.
4.1.7 If the mass of the test machine base is less than 50 times the maximum mass of the hammer, hammer width, height should be less than half the length of the base.
4.2 Test System
Test system includes an acceleration sensor, amplifier, display or recording devices. Test systems should have enough frequency response, measured in
Amount within the range of accuracy of the test system should be within ± 5% of.
5 test sample
5.1 Sampling
Test samples should be placed in a random sample of more than 24h finished when its size can not meet the stipulated requirements, allowing production
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 8167-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 8167-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 8167-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 8167-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 8167-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8167-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|