|
US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5018-2008: Standard test method for determining corrosion preventive properties of lubricating greases
Status: Valid GB/T 5018: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5018-2008 | English | 329 |
Add to Cart
|
3 days [Need to translate]
|
Standard test method for determining corrosion preventive properties of lubricating greases
| Valid |
GB/T 5018-2008
|
| GB/T 5018-1985 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Standard test method for corrosion preventive properties of lubricating greases
| Obsolete |
GB/T 5018-1985
|
PDF similar to GB/T 5018-2008
Standard similar to GB/T 5018-2008 GB/T 7323 GB/T 36990 GB/T 5671 GB/T 7324 Basic data | Standard ID | GB/T 5018-2008 (GB/T5018-2008) | | Description (Translated English) | Standard test method for determining corrosion preventive properties of lubricating greases | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E36 | | Classification of International Standard | 75.100 | | Word Count Estimation | 14,118 | | Date of Issue | 2008-02-13 | | Date of Implementation | 2008-09-01 | | Older Standard (superseded by this standard) | GB/T 5018-1985 | | Quoted Standard | GB/T 6682; SH 0005 | | Adopted Standard | ASTM D1743-2005a, MOD | | Regulation (derived from) | National Standard Approval Announcement 2008 No.2 (Total No.115) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the conditions under wet coated with grease tapered roller bearing grease to determine the corrosion resistance. This standard is based on the technical conditions can represent CRC laboratory evaluation results with grease lubricated wheel bearings actual results aircraft correspondence between L41 making. This standard has no intention to point out all of the safety problems, so the user before using this standard to establish appropriate safety and health practices and determine the applicability of the management system. | GB/T 5018-2008: Standard test method for determining corrosion preventive properties of lubricating greases
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Standard test method for determining corrosion preventive properties of lubricating greases
ICS 75.100
E36
National Standards of People's Republic of China
Replacing GB/T 5018-1985
Grease corrosion test method
Posted 2008-02-13
2008-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This revised standard adopts the American Society for Testing and Materials standard ASTMD1743-05a "grease corrosion test method."
This standard redrafted according ASTMD1743-05a.
In order for our country, the present standard when using ASTMD1743-05a been modified. This standard ASTMD1743-05a
The main differences are as follows.
--- Reference standard using China's current national standards and petrochemical industry standards.
--- Motor speed increases the optional speed 1450r/min ± 50r/min of.
--- Figure involved in imperial units converted to SI units.
--- Remove the keyword chapter.
This standard replaces GB/T 5018-1985 "Grease corrosion test method", GB/T 5018-1985 reference ASTM
D1743. 1973 (81) established.
The main changes compared to 5018-1985 standard and GB/T as follows.
--- Press ASTMD1743-05a test procedure has been modified.
--- Test bearings from the 7604 Timken bearings or bearings (cone No.09074, outer No.09169) to model
LM11949 and LM11910 bearing cone bearing outer ring of the bearing.
--- Test results assessed by ASTMD1743-05a been modified.
--- Precision press ASTMD1743-05a been modified.
--- This standard GB/T 5018-1985 Appendix A to Appendix A (informative) "Release Notes", and added Appendix B
(Informative) "alternative test method for corrosion prevention."
The Standard Appendix A and Appendix B are informative.
The standard proposed by China Petroleum and Chemical Corporation.
The standard by the China Research Institute of Petroleum Corp. petrochemicals.
This standard was drafted. China Petroleum & Chemical Corporation Research Institute of Petroleum.
The main drafters of this standard. Liu thereof, Yao Zhiqin.
This standard replaces the standards previously issued as follows.
--- GB/T 5018-1985.
Grease corrosion test method
1 Scope
This standard specifies the conditions under wet coated with grease tapered roller bearing grease to measure corrosion. This standard is
According to the technical documentation can be expressed CRC laboratory evaluation result corresponds with the actual use of the results of aircraft wheel bearings with grease lubrication of
L41 developed.
Note. American Scientific Partnership Committee (CRC) technical documents L41-957 studied in the presence of free water corrosion test grease square
law. CRC's address 219PerimeterCenterParkway, Atlanta, GA30346. USA.
This standard is not intended to point out all of the safety problems, so users in the use of this standard to establish appropriate safety and health practices and
Determine the applicability of the management system.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 6682 Water Analysis Laboratory specifications and test methods (GB/T 6682-1992, neq ISO 3696. 1987)
SH0005 industrial paint solvent oil
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
A material, usually a chemical or electrochemical reaction between a metal and its presence in the environment, this reaction may cause such material properties
Reduced.
NOTE. In this standard, the raceway red rust or corrosion spots defined in the bearing outer ring. If the stain is still visible under the metal surface, the stain in this standard does not recognize
As is corrosion, and should be ignored.
4. Summary
The new cleaning net coated with grease sample bearing a slight load operation under 60s ± 3s thrust, as the grease in actual use
distributed. Bearing storage 48h ± 0.5h at 52 ℃ ± 1 ℃ and 100% relative humidity, and then clean and inspect the bearing outer ring raceway
Signs of corrosion.
5. Significance and Uses
This test method can be used to distinguish between different grease under the test conditions, the relative corrosion resistance.
6 Instruments
6.1 Bearings. the LM11949 and LM11910 bearing cone bearing outer ring.
6.2 motor. speed is 1450r/min ± 50r/min or 1750r/min ± 50r/min, 50W (minimum).
|