Path:
Home >
GB/T >
Page101 > GB/T 46122.3-2025
Home >
Standard_List >
GB/T >
Page101 > GB/T 46122.3-2025
US$274.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 46122.3-2025: Fireworks - Test methods for determination of specific chemical substances - Part 3: Determination of lead and lead compounds - Atomic absorption
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 46122.3-2025 | English | 274 |
Add to Cart
|
3 days [Need to translate]
|
Fireworks - Test methods for determination of specific chemical substances - Part 3: Determination of lead and lead compounds - Atomic absorption
| Valid |
GB/T 46122.3-2025
|
PDF similar to GB/T 46122.3-2025
Basic data
| Standard ID | GB/T 46122.3-2025 (GB/T46122.3-2025) |
| Description (Translated English) | Fireworks - Test methods for determination of specific chemical substances - Part 3: Determination of lead and lead compounds - Atomic absorption |
| Sector / Industry | National Standard (Recommended) |
| Classification of Chinese Standard | Y88 |
| Classification of International Standard | 71.100.30 |
| Word Count Estimation | 14,183 |
| Date of Issue | 2025-08-29 |
| Date of Implementation | 2025-12-01 |
| Issuing agency(ies) | State Administration for Market Regulation; Standardization Administration of China |
GB/T 46122.3-2025: Fireworks - Test methods for determination of specific chemical substances - Part 3: Determination of lead and lead compounds - Atomic absorption
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT46122.3-2025
ICS 71.100.30
CCSY88
National Standards of the People's Republic of China
Detection methods for specific chemical substances in fireworks and firecrackers
Part 3.Determination of Lead and Lead Compound Content
Flame atomic absorption spectrometry
atomic absorption (IDT)
Released on August 29, 2025; to be implemented on December 1, 2025.
State Administration for Market Regulation
The State Administration for Standardization issued a statement.
Table of Contents
Preface III
Introduction IV
1.Scope 1
2 Normative References 1
3.Terms and Definitions 1
4.Method Principles 1
5.Reagent 1
6.Instruments and Equipment 2
7.Sample Preparation 2
8.Analysis Step 2
9.Result Calculation 3
10 Precision 3
11 Test Report 3
Appendix A (Informative) Reference Operating Conditions for Microwave Digestion Apparatus 4
Appendix B (Informative) Reference Operating Conditions for Atomic Absorption Spectrometer 5
Appendix C (Informative) Standard Inclusion Method 6
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents".
Drafting.
This document is Part 3 of GB/T 46122 "Test Methods for Specific Chemical Substances in Fireworks and Firecrackers". GB/T 46122 has been published.
The following parts were included.
---Part 1.General Provisions;
---Part 2.Determination of Hexachlorobenzene Content by Gas Chromatography;
---Part 3.Determination of Lead and Lead Compound Content by Flame Atomic Absorption Spectrometry;
---Part 4.Determination of Lead and Lead Compound Content by X-ray Fluorescence Spectrometry;
---Part 5.Determination of Lead and Lead Compound Content by Inductively Coupled Plasma Atomic Emission Spectrometry;
---Part 6.Determination of Zirconium Content in Particles Smaller than 40 μm by Inductively Coupled Plasma Atomic Emission Spectrometry;
---Part 7.Determination of Chlorate Content by Chemical Titration Analysis;
---Part 8.Determination of Arsenic Content by Hydride Generation-Atomic Fluorescence Spectrometry;
---Part 9.Determination of Mercury Content by Hydride Generation-Atomic Fluorescence Spectrometry;
---Part 10.Determination of Nitrogen Content in Nitrocellulose by Ferrous Sulfate Titration;
---Part 11.Determination of Phosphorus Content by Inductively Coupled Plasma Atomic Emission Spectrometry;
---Part 12.Determination of picric acid and picrate content by high performance liquid chromatography.
This document is equivalent to ISO 22863-3.2020 "Fireworks and firecrackers - Specific chemical substances - Test methods - Part 3.Flame atomic absorption spectrometry".
Determination of lead and lead compound content by spectroscopic method.
The following minimal editorial changes have been made to this document.
---To harmonize with existing standards, the standard name has been changed to "Test Methods for Specific Chemical Substances in Fireworks and Firecrackers Part 3.Lead and Lead
Determination of compound content by flame atomic absorption spectrometry.
Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.
This document was proposed by the China National Light Industry Council.
This document is under the jurisdiction of the National Technical Committee on Standardization of Fireworks and Firecrackers (SAC/TC149).
This document was drafted by. Hunan Provincial Fireworks and Firecrackers Product Safety and Quality Inspection Center, Changsha Customs Technology Center, and Liuyang Yihelong Fireworks.
Group Limited Company.
The main drafters of this document are. Zhang Guanghui, Peng Ding, Hu Yudong, Jiang Zicheng, Zhong Jihao, and Gao Lili.
introduction
With increasing emphasis on the safety and environmental protection of fireworks and firecrackers, attention is being paid to the chemical substances used in these products.
Requirements were established, particularly regarding restrictions on the use of toxic, hazardous, and chemical substances that increase the flammability and explosion hazard of products. International Standards
The Technical Committee on Fireworks and Firecrackers of the United Nations organized the development of ISO 22863 (all parts). GB/T 46122 adopts ISO 22863 (all parts).
The standardization and normalization of testing methods for fireworks and firecrackers is aimed at improving the safety and environmental performance of fireworks and firecrackers and promoting industrial development.
This is the foundational work. GB/T 46122 is planned to consist of 12 parts.
---Part 1.General Principles. The purpose is to determine the methods for specimen dissection, sampling, and sample preparation.
---Part 2.Determination of Hexachlorobenzene Content by Gas Chromatography. The purpose is to determine the hexachlorobenzene content in fireworks and firecrackers.
The methods, procedures, and results descriptions.
---Part 3.Determination of Lead and Lead Compound Content by Flame Atomic Absorption Spectrometry. The aim is to determine the appropriate method for determining the content of lead and lead compounds using flame atomic absorption spectrometry.
This paper describes the method, procedure, and results for determining the content of lead and lead compounds in fireworks and firecrackers using spectrophotometry.
---Part 4.Determination of Lead and Lead Compound Content by X-ray Fluorescence Spectroscopy. The aim is to determine the content of lead and lead compounds using X-ray fluorescence spectroscopy.
The method, procedure, and results of spectroscopic determination of lead and lead compound content in fireworks and firecrackers are described.
---Part 5.Determination of Lead and Lead Compound Content by Inductively Coupled Plasma Atomic Emission Spectrometry. The aim is to determine the content of lead and lead compounds.
Methods, procedures, and results for determining lead and lead compound content in fireworks and firecrackers using inductively coupled plasma atomic emission spectrometry.
The result is expressed.
---Part 6.Determination of Zirconium Content in Particles Smaller than 40 μm by Inductively Coupled Plasma Atomic Emission Spectrometry. The aim is to determine...
A method for determining the zirconium content (particle size less than 40 μm) in fireworks and firecrackers using inductively coupled plasma atomic emission spectrometry.
Procedure and result description.
---Part 7.Determination of Chlorate Content by Chemical Titration Analysis. The purpose is to determine the appropriate chemical titration method for determining chlorate content in fireworks.
Methods, procedures, and results description for determining chlorate content in firecrackers.
---Part 8.Determination of Arsenic Content by Hydride Generation-Atomic Fluorescence Spectrometry. The aim is to determine the arsenic content using hydride generation-atomic fluorescence spectrometry.
The method, procedure, and results of determining the arsenic content in fireworks and firecrackers by fluorescence spectroscopy are described.
---Part 9.Determination of Mercury Content by Hydride Generation-Atomic Fluorescence Spectrometry. The aim is to determine the method for determining mercury content using hydride generation-atomic fluorescence spectrometry.
The method, procedure, and results of determining mercury content in fireworks and firecrackers by fluorescence spectroscopy are described.
---Part 10.Determination of Nitrogen Content in Nitrocellulose by Ferrous Sulfate Titration. The aim is to determine the method of using ferrous sulfate titration...
This document describes the methods, procedures, and results for determining the nitrogen content in nitrocellulose in fireworks and firecrackers.
---Part 11.Determination of Phosphorus Content by Inductively Coupled Plasma Atomic Emission Spectrometry. The aim is to determine the appropriate method for determining phosphorus content using inductively coupled plasma atomic emission spectrometry.
The method, procedure, and results of determining phosphorus content in fireworks and firecrackers by plasma atomic emission spectrometry are described.
---Part 12.Determination of Picric Acid and Picrate Content by High Performance Liquid Chromatography. The aim is to determine the method using high performance liquid chromatography.
The method, procedure, and results of spectroscopic determination of picric acid and picrate content in fireworks and firecrackers are described.
Detection methods for specific chemical substances in fireworks and firecrackers
Part 3.Determination of Lead and Lead Compound Content
Flame atomic absorption spectrometry
1.Scope
This document specifies a method for determining the lead content in fireworks and firecracker powders using flame atomic absorption spectrometry, with a method detection limit of [missing information].
10mg/kg.
This document applies to the determination of lead content in pyrotechnic powder used in fireworks and firecrackers.
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.
This document.
GB/T 46122.1-2025 Test methods for specific chemical substances in fireworks and firecrackers – Part 1.General (ISO 22863-1.
2020, IDT)
ISO 22863-1 Test methods for specific chemical substances in fireworks and firecrackers – Part 1.General principles
Note. GB/T 46122.1-2025 Test methods for specific chemical substances in fireworks and firecrackers – Part 1.General (ISO 22863-1.2020, IDT)
3.Terms and Definitions
This document does not contain any terms or definitions that need to be defined.
The URLs for the terminology databases maintained by ISO and IEC for standardization are as follows.
4.Method Principles
The sample was decomposed with hydrochloric acid, hydrofluoric acid, and perchloric acid. The perchloric acid emitted fumes to remove hydrogen fluoride. The salts were dissolved with hydrochloric acid, and the solution was analyzed by flame atomic absorption spectrometry.
The lead content was determined using an air-acetylene flame on a photometer.
5.Reagents
Unless otherwise stated, only reagents confirmed to be of analytical grade and distilled or deionized water or water of equivalent purity are used in the analysis.
5.1 Hydrochloric acid (ρ=1.19g/mL).
5.2 Perchloric acid (ρ=1.67g/mL).
5.3 Nitric acid (ρ=1.42g/mL).
5.4 Hydrofluoric acid (ρ=1.15g/mL).
Tips & Frequently Asked Questions:
Question 1: How long will the true-PDF of GB/T 46122.3-2025_English be delivered?
Answer: Upon your order, we will start to translate GB/T 46122.3-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.
Question 2: Can I share the purchased PDF of GB/T 46122.3-2025_English with my colleagues?
Answer: Yes. The purchased PDF of GB/T 46122.3-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.
Question 3: Does the price include tax/VAT?
Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs):
List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?
Answer: Yes. If you need your currency to be printed on the invoice, please write an email to
[email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.