|
US$204.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 41171-2021: Urine-absorbing aids for incontinence - Measurement of airborne respirable polyacrylate superabsorbent materials - Determination of dust in collection cassettes by sodium atomic absorption spectrometry
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 41171-2021 | English | 204 |
Add to Cart
|
3 days [Need to translate]
|
Urine-absorbing aids for incontinence - Measurement of airborne respirable polyacrylate superabsorbent materials - Determination of dust in collection cassettes by sodium atomic absorption spectrometry
| Valid |
GB/T 41171-2021
|
PDF similar to GB/T 41171-2021
Basic data | Standard ID | GB/T 41171-2021 (GB/T41171-2021) | | Description (Translated English) | Urine-absorbing aids for incontinence - Measurement of airborne respirable polyacrylate superabsorbent materials - Determination of dust in collection cassettes by sodium atomic absorption spectrometry | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | C45 | | Word Count Estimation | 10,158 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 41171-2021: Urine-absorbing aids for incontinence - Measurement of airborne respirable polyacrylate superabsorbent materials - Determination of dust in collection cassettes by sodium atomic absorption spectrometry
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Urine-absorbing aids for incontinence -- Measurement of airborne respirable polyacrylate superabsorbent materials -- Determination of dust in collection cassettes by sodium atomic absorption spectrometry
ICS 11:180:20
CCSC45
National Standards of People's Republic of China
Urine absorption aids for incontinence
Measurement of Airborne Respirable Polyacrylic Super Absorbent Materials
Determination of Dust Collection Box by Sodium Atomic Absorption Spectrometry
(ISO 17191:2004, IDT)
Published on 2021-12-31
2021-12-31 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
directory
Preface I
Introduction II
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Test principle 1
5 Reagent 1
6 Test equipment 2
7 Test procedure 3
8 Calculate 5
9 Accuracy 6
10 Inspection report 6
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents"
drafted:
This document is identical to ISO 17191:2004 "Air-inhalable polyacrylic acid superabsorbent materials for incontinence urine absorption aids"
Measurement of Sodium Atomic Absorption Spectrometry for the Determination of Collection Box Dust":
A chapter "Terms and Definitions" has been added to this document:
Please note that some content of this document may be patented: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed by the Ministry of Civil Affairs of the People's Republic of China:
This document is under the jurisdiction of the National Technical Committee on Standardization of Rehabilitation and Special Equipment for Persons with Disabilities (SAC/TC148):
This document is drafted by: National Research Center for Rehabilitation Assistive Devices, Fujian Provincial Technical Service Center for Rehabilitation Assistive Devices, Anhui Winning Smart Quality Standards
Research Institute Co:, Ltd:, Lixin Youai Hospital of Integrated Traditional Chinese and Western Medicine:
The main drafters of this document: Liu Junling, Ma Fengling, Yang Dehui, Ma Lifang, Rao Xuan, Yang Wenbing, Xia Xiulin, Wang Yaping, Chen Hui:
Introduction
ISO 17191 was originally developed by the European Nonwovens Association (EDANA) and specifies the determination of polyacrylic acid superabsorbent powders in air:
The test method for dust content is part 1 of 12 parts of the test method series: The remaining 11 parts are for the determination of polymeric water-absorbing materials
The test method for material properties was later converted into ISO 17190 consisting of 11 parts, and was equivalently adopted by my country and converted into a national standard
Standard GB/T 20405:
The test methods in ISO 17191 have been used in foreign countries for many years, according to the general standards for the pros and cons of test methods (validity and reproducibility):
etc:), the reliability has been proven, and it is suitable for polyacrylic acid superabsorbent materials in sanitary products including incontinence urine absorption aids:
material detection:
Urine absorption aids for incontinence
Measurement of Airborne Respirable Polyacrylic Super Absorbent Materials
Determination of Dust Collection Box by Sodium Atomic Absorption Spectrometry
1 Scope
This document describes a method for the determination of polyacrylic acid superabsorbent powder content in air dust by measuring sodium atoms by atomic absorption spectrometry
Law: A polyacrylic dust sample was collected in a polystyrene-acrylonitrile air monitoring box using a Teflon filter and porous plastic liner:
This document applies to 0:2μg~60μg (detection limit is close to 0:2μg) superabsorbent powder:
NOTE: This test is used for the determination of low levels of sodium and requires high cleanliness operating conditions: Test analysis was successful with deionized/distilled water with very low sodium content
The essential:
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document:
ISO 3696:1987 Specification and test methods for water in analytical laboratories (Waterforanalyticallaboratoryuse-Speci-
ficationandtestmethods)
Note: GB/T 6682-2008 Specifications and test methods for analytical laboratory water (ISO 3696:1987, MOD)
3 Terms and Definitions
There are no terms and definitions that need to be defined in this document:
4 Test principle
The content of sodium atoms in the polyacrylic acid superabsorbent powder collected by the air monitoring box was determined by atomic absorption spectrometry: by potassium chloride solution
After the sodium atom was released from the polyacrylic acid superabsorbent powder by potassium replacement, the dissolved sodium content was determined by atomic absorption spectrometry, and the blank was removed:
After the background content of sodium in the box, the mass of the collected polyacrylic acid superabsorbent powder was calculated:
To minimize sodium interference, pre-clean the collection box before collecting airborne superabsorbent powders: For ease of analysis, one aliquot of potassium chloride was dissolved in
The liquid is directly sucked into the atomic absorption atomization chamber from the collection box:
5 Reagents
Unless otherwise specified, use only recognized analytical grade reagents: Use plastic containers for all reagents and solutions, potassium chloride solution
(5:5) and isopropanol (5:3): Use glass containers for these reagents and solutions during transport:
Pre-analyze sodium in the reagents and solutions specified in 5:1, 5:2 and 5:3 by atomic absorption spectrometry before use in cleaning the collection box or sodium analysis
(Na) content:
5:1 Potassium chloride (KCl), the KCl content is not less than 99:999%; the Na content is less than 10 μg/g:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 41171-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 41171-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 41171-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 41171-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|